User manual

3. Install the core temperature sensor.
Refer to "Core temperature sensor".
4. Touch or to set the programme
for the core temperature sensor.
The display shows the cooking time,
and .
5. Touch
or the settings save
automatically after five seconds.
When the set time ends, an acoustic signal
sounds for two minutes. flashes.
6. Touch a sensor field or open the door
to stop the acoustic signal.
7. Deactivate the appliance.
USING THE ACCESSORIES
WARNING! Refer to Safety
chapters.
Core temperature sensor
There are two temperatures to be set: the
oven temperature and the core
temperature.
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the
appliance deactivates.
CAUTION! Only use the core
temperature sensor supplied or
the correct replacement parts.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
1.
Activate the appliance.
2.
Put the point of the core temperature
sensor (with
on the handle) into the
centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of the
appliance.
The display shows flashing and the
default set core temperature. The
temperature is 60 °C for the first operation,
and the last set value for each subsequent
operation.
When you put the core
temperature sensor into the
socket, you cancel the settings
for the clock functions.
4. Touch or to set the core
temperature.
5. Touch
or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If is in the display
but does not flash before
you set the core
temperature, touch and
or to set a new
value.
6. Set the oven function and the oven
temperature.
16