User manual

The display shows the current core
temperature and the heat up symbol .
While the appliance calculates the
approximate duration time, the display
shows the count up time. After the first
calculation the display shows the
approximate duration of the cooking time.
The appliance continues to calculate the
duration during the cooking. The display
updates at intervals with the new duration
value.
When you cook with the core
temperature sensor, you can
change the temperature shown
in the display. After you put the
core temperature sensor in the
socket and set an oven function
and temperature, the display
shows the current core
temperature.
Touch
again and again to
see three other temperatures:
• the set core temperature
• the current oven
temperature
• the current core
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds for
two minutes and the value of the core
temperature and
flash. The appliance
deactivates.
7. Touch a sensor field to deactivate the
acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
WARNING! Be careful when
you remove the core
temperature sensor. It is hot.
There is a risk of burns.
Inserting the accessories
CAUTION! Do not use the
baking tray or deep pan with the
Full Steam function.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide bars
of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide bars
of the shelf support and the wire shelf on
the guide bars above and make sure that
the feet point down.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim around
the shelf prevents cookware
from slipping of the shelf.
17