User manual

t
21
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing mm 880
Depth of housing mm 550
Width of housing mm 560
1. It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
50 mm
min.
cm
2
200
200 cm
2
min.
D526
540
50
560
550
880
PR 32
2. Apply joint the sealing strip as shown in figure.
D132
A
D022
3. Slide the appliance into the recess, pushing it
against the wall on the handle side.
4. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4 screws
provided in the kit included with the appliance.
Snap vent grille (C) and hinge cover (D) into
position.
D727
C
D
5. Apply covers (B) on joint cover lugs and into hinge
holes.
D013
BB