iCharger 4010DUO Battery Charger Manual

ManualsBrandsJunsi ManualsBattery ChargersICharger 4010DUO Multi-Chemistry DC Battery Charger (10S/40A/2000W)

iCharger

iCharger Synchronous

Synchronous

Synchronous Balance

Balance

Balance Charger/Discharger

Charger/Discharger

Charger/Discharger 4010DUO

4010DUO

- 17 -

■

■ NiXX

NiXX

NiXX Battery

Battery

Battery Charge/Discharge

Charge/Discharge

Charge/Discharge Setup

Setup

After adding program, it will switch to NiXX battery in

Type

option on the

MEMORY SETUP

interface, and set the

capacity, the number of cells for NiXX battery cannot be set , and the charger sets

Auto

by default , after editing all

parameters for program, click " " to save and return to the previous interface.

As shown in above picture, the program of NiMH , NiCd have:

Charge, Discharge

and

Cycle

① NiXX

NiXX

NiXX Battery

Battery

Battery Charge

Charge

Charge Setup

Setup

Select

Program → Charge to

enter

Charge

setup interface.

Note: Charge Mode has

Normal , Reflex

two modes available; use the reflex mode to charge battery

can reduce heat of battery; please see charging principle in Page32 Important

Important

Important Notes

Notes

Notes .

Click " " to enter

NiXX CHARGE OPTION SETUP

interface, after setting click " " to return to the

previous interface.

Note: Tick

Allow 0V Charging

to allow charge with

0V.

Allow 0V Charging

suits for some applications (such as charge the battery pack in the

transmitter, the circuit in series with a diode).

Tick

Trickle Enable → Enable

to active trickle charge and set the parameters, after setting click " " to return to the

previous interface.

Note: Tick

Enable

to active trickle charge.

Trickle charge is based on a smaller current to charge the battery for a period, to reduce

battery consumption and extend battery usage time.

NiXX B attery Charge Setup

Chg Current :

0.05A-40A ; default : 2A

Chg Mode :

Normal (default) , Reflex

NiXX Battery C harge Advanced Setup

Sensitivity :

1mV-20mV; default : 3mV

Delay time :

0Min-20Min ; default : 3Min

NiXX Battery Trickle Charge Setup

Trickle current :

0. 0 2A-1A ; default : 0. 0 5A

Trickle timeout :

1Min-999Min;

default : 5Min