iCharger 4010DUO Battery Charger Manual

iCharger
iCharger
iCharger
iCharger Synchronous
Synchronous
Synchronous
Synchronous Balance
Balance
Balance
Balance Charger/Discharger
Charger/Discharger
Charger/Discharger
Charger/Discharger 4010DUO
4010DUO
4010DUO
4010DUO
- 4 -
●
●
●
● 4010DUO
4010DUO
4010DUO
4010DUO Special
Special
Special
Special Features
Features
Features
Features
1. The 4010DUO uses advanced Synchronous buck-boost DC/DC converter technology , h igh power, and high current
and high-performance power conversion circuit. The maximum charge power capacity up to 2000W , the maximum
charge/discharge current of channel up to 40A, and two channels in Synchronous Mode up to 70A.
2. Channel S upport s 10s LiPo , Lilo , LiFe, with maximum 1.2A balance current, adopt s unique balance calculation of
internal resistance correct ion .
3. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan
speed .
4. Internal temperature protection. When the internal temperature exceeds the reduce temperature, the output power is
automatically reduced; and the charger will shut down when temperature exceeds the cut- temperature.
5. 64 parameters sets can be saved, without repeat setting when use, just import/ export via SD card.
6. TFT LCD screen that provide s rich information including current, voltage, power, capacity, internal resistance,
control status, time-consuming and temperature, etc.
7. Multi-discharge features: discharge-self, regenerative to input discharge, regenerative to channel discharge, and
l ithium battery extra expanding discharge.
8. Support measurement for internal resistance of battery offline and online. Can measure not only the internal
resistance of the entire battery pack, but also measure the per-cell internal resistance of lithium battery.
9 . The iCharger has protection for reversed polarity (input or output), input voltage /current , battery temperature,
charging capacity , time overrun and maximum power etc .
10. Support s upgrading the hardware program by USB port. The iCharger also support s the “ L ogview ” software and
can display, plot and analyze the charge and discharge data by it. (See detail information about L ogview in the
following website: http://www.logview.info )
● Appearance
Appearance
Appearance
Appearance P
P
P
P arameters:
arameters:
arameters:
arameters:
● Net weight : 1.47kg
● Dimension : 210.0 × 140.1 × 80.2 ± 0.5mm
● Specifications
Specifications
Specifications
Specifications :
:
:
:
● Input voltage range : 9.0 — 50.0VDC
● Maximum input current limit: <65A
● Maximum charge/discharge current: 70A@Syn . Mode 40A@Asyn. Mode
● Maximum charge power capacity: 2000W (Channel 1400W @input > 23.5V)
● Maximum discharge power capacity: 200W (Channel 130W)
● Maximum regenerative discharge power capacity : 2000W (Channel 1400W)
● Maximum ext ra discharge power capacity: 3200W (Channel 1600W @40V/40A)
● Maximum c urrent drain for balancing: 2.4A@Syn . Mode 1.2A@Asyn. Mode