DC Battery Charger Manual

ManualsBrandsJunsi ManualsBattery ChargersICharger X8 Lilo/LiPo/Life/NiMH/NiCD DC Battery Charger (8S/30A/1100W)

Mini Balance Charger/Discharger/DC Power

- 22 -

NiZn Battery Charge Setup

Select Program→Charge to enter Charge setup interface.

Note: When the battery cell charging voltage setting exceeds the recommended value (1.9V), the charger will display

a warning and alarm. As long as the user changes the value, the battery type and cell voltage values on the main

interface of charger will display alternately.

NiZn Battery Not Balance Charger Setup

Switch to Not Balance mode on Chg Mode interface, see details about setting on “LiPo/LiIo/LiFe Battery Not Balance

Charge Setup”.

NiZn Battery Balance Charge Setup

Switch to Slow Balance

，

Normal Balance

，

Fast Balance

，

User Balance on Chg Mode interface, see details about setting

on “LiPo/LiIo/LiFe Battery Balance Charge Setup”.

NiZn Battery Charge Advanced Setup

Click " " to enter NIZN ADVANCED SETUP interface, see details about setting on “LiPo/LiIo/LiFe Battery

Charge Advanced Setup”.

NiZn Battery Charge Safety Setup

Click " " to enter CHARGE SAFETY SETUP interface, see details about setting on “LiPo/LiIo/LiFe Battery

Charge Safety Setup”.

NiZn Battery Discharge Setup

Select Program→Discharge to enter Discharge setup interface

Note: 1.The charger first discharges with constant current (CC) according to the user setting then turns to constant

voltage (CV) when it reaches the discharge voltage. In the CV phase the current gradually falls, and the

charger will terminate discharging when the current falls below the percentage of the configured discharge

current.

2. Regenerative mode has two available settings: OFF, To input, see more details on “Important Notes”.

Chg Current: 0.05A-30A; default: 1.5A

Chg Mode: Slow Balance

，

Fast Balance

，

Normal Balance

，

User Balance,

Not Balance (default)

Chg End Current: 1%-50%; default: 10%

Chg Cell Volt: 1.2V/Cell-2V/Cell; default: 1.9V/Cell

Discharge Current: 0.05A-30A

；

default: 1.5A

Discharge Voltage: 0.9V/Cell-1.6V/Cell;default:1.1V/Cell

End Current: 1%-100%; default: 50%

Regenerative Mode: OFF (default),To input