DC Battery Charger Manual

X8
Mini Balance Charger/Discharger/DC Power
- 26 -
After selecting input source, enter the relevant power supply setting to set the parameters, after setting click “ ”to
save and return to the previous interface.
When the input source unselected, pop up the “MANAGE” window, as below:
Note: the maximum charge output power is limited by both input voltage and input current: Wmax ≈ Imax * Vin*
95%，when Imax is 35A, the curve graph is as below:
1: Low Voltage Limit: 9V-48V; default: 9V
2: Current Limit: 1A-35A; default: 35A
3: Charge Power Limit: 5W-1100W; default: 1100W
4: Regenerative enable
5: Regen. Voltage Limit: 9V-48V; default: 14.5V
6: Regen. Current Limit: 1A-35A; default: 10A
7: Regen. Power Limit: 5W-1100W; default: 1100W
8: Regen. Capacity Limit: Ignore (default)
100mAh-999900mAh
After ticking Regenerative enable, if run the
regenerative discharge to input, the electrical
discharged will be re-charged as the battery of input
power.
6
1
2
3
4
5
7
8