DC Battery Charger Manual

Mini Balance Charger/Discharger/DC Power

- 27 -

Save & Load Configuration Setup

Select Save & Load Config on SYSTEM MENU and enter the setup interface.

Note: 1. Users can save configuration to SD card and re-load via the SD card if needed.

2. After loading the configuration files, in addition to Calibration Select, it will cover all settings within the

charger.

Language Setup

Select Language on SYSTEM MENU and enter the setup interface.

Calibration

Select SYSTEM MENU→Charger Setup→Calibration to enter the setup interface. User Calibration may result in large

data deviation, affecting normal use; so User Calibration is not suggested.

1: Save Configuration to SD card

2: Load Configuration from SD card

3: Load Defaults Configuration

1: English

2: Deutsch