DC Battery Charger Manual

Mini Balance Charger/Discharger/DC Power

- 4 -

Special Features

1. X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and

high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum

charge/discharge current of a channel is up to 30A.

2. X8 Supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a

unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s Pb

batteries.

3. With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage

protection, input undercurrent protection, and etc.)

4. Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan

speed.

5. Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output

power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down

temperature.

6. This charger can save 32 parameters sets and support the data import/export to SD card.

7. A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance,

control status, time-consuming and temperature, etc.

8. Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding

discharge.

9. Supports measurement for internal resistance of battery offline and online. Can measure not only the internal

resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.

10. X8 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging

capacity, overrun time and maximum power etc.

11. Supports upgrading the hardware program by USB port or SD card. X8 also supports the “Junsi Console” software

and can display, plot and analyze the charge and discharge data by it.

Specifications

Input voltage range: 9—49VDC

Max. charge/discharge/DC power current: 30A

Maximum charge power capacity: 1100W

Maximum discharge power capacity: 50W/1100W (regenerative)

Max. balancing current/cells: 2A/8S

Battery Chemistry Type: LiVH, LiPo, Lilo, LiFe, LTO, NiZn, NiMH, NiCd, Pb

Dimension: 97.5×64.5×37 ±0.5mm

Net weight: 200g