Use and Care Manual

32
CONTENTS:
Carefully remove the Rollator frame and parts
from the box and inspect them for any damage or
missing parts that may have resulted from shipping.
PARTS INSIDE BOX:
(1) Rollator Frame with Bag and Seat (See image 1).
(1) Padded Backrest (see image 2).
(2) Front Leg-Wheel Part, marked ‘L’ for Left and ‘R’
for Right (see image 3).
(2) Rear Leg-Wheel Part with Cable, Handle and
Hand Brake, marked ‘L’ for Left and ‘R’ for
Right (see image 4).
(4) Leg-Wheel Adjustment Knobs – longer,
and (2) Handle Adjustment Knobs – shorter
(see image 5).
ASSEMBLY INSTRUCTIONS:
1. OPEN THE FRAME
• Place frame on the floor with top of seat facing
up, (see image 6).
• Spread frame out, lift up padded seat and press
down on bottom of storage bag. User will feel
folding bar. Push down on folding bar until it
locks in place, (see image 6).
2. INSERT PADDED BACKREST
• Insert Padded Backrest into the plastic backrest
hinges, (see image 7).
• Using thumb, press down on the push button
and slide the Padded Backrest into the hinge
until the buttons engage into the hinge holes.
Ensure that the push buttons fully engage in
the hinge holes.
• Pull up on the Padded Backrest to ensure
it is properly installed
• Note: Padded Backrest can be folded up when
not in use
walk safely.
walk in style.
1
4
2
5
3
6
7
padded seat:
adjusts to 3
different heights
ergonomic
comfort
handgrips
height
adjustable
handles
locking
handbrakes
height
adjustable
8” indoor/
outdoor
wheels
storage
bag
DELUXE ROLLATOR