LCD Television Users Guide

10
Remote Control
The following pages gives you a brief description of each button’s function. For more detailed
information on the remote control buttons, see pages 19 - 21.
Choose how long the TV will stay on before
turning off. See page 19.
Switch between devices
connected to Video-1, 2, 3,
4 and 5.
Change channels.
Change the aspect ratio of the image on your
TV screen. See page 20.
Used to select sub channels.
(Digital channels only). See page 21.
Listen to a program in stereo, mono or
another language (SAP). (Depending on
availability in the program). See page 21.
Lets you decide the input channel and select
it. After pressing the remote 0 - 9 buttons,
press TUNE.
Lets you go back to the previously selected
channel. See page 19.
Programming information. (Digital channels
only). See page 21.
Turns the TV on or off.
For V4 (Video-4) and V5 (Video-5) you must select the signal
input type fi rst (ie. composite, S-Video, or component). To do
so, you need to press the V4 or V5 button until the correct
type is highlighted. Select “Composite 1” for composite video
signal input, “S-Video” for S-video signal input, or “Component
1” for component video signal input. Select “Composite 2” for
composite video signal input or “Component 2” for component
video signal input.
LCT2389-001B-A English.indd 10LCT2389-001B-A English.indd 10 6/10/08 1:41:47 PM6/10/08 1:41:47 PM