User's Manual

18
Customized setting (continued)
DISPLAY
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
Choose a TV channel or a VIDEO terminal.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
then press MENU/OK button.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
ON OFF PR LIST
PR CH/CC
V1
V2
V3
AV
1
2
3
CH 09
CC 76
CC 78
PR LIST
MENU : OK
-7 +7
■
■
■
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting (Factory setting is COMPONENT).
MENU
INSTALL menu
VIDEO-2 SETTING
❇
VIDEO If a normal video signal (composite video signal) is input.
COMPONENT If a component video signal (Y/C
B
/C
R
) is input.
You must choose a setting follow as signal that you input to VIDEO-2.
(If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must
choose VIDEO-2 SETTING to VIDEO.)
For connecting methods, see “Additional Preparation” on page 22.
SETUP TOUR
You may use the SETUP TOUR function to perform the initial setting.
When selecting SETUP TOUR, the LANGUAGE menu, TEXT
LANGUAGE menu, AUTO PROGRAM menu, and EDIT menu will
be displayed as shown on page 8. But “SETUP TOUR RESTART?”
will not be displayed.
Select SETUP TOUR in the INSTALL menu.
MENU
INSTALL menu
SETUP TOUR
❇
GGT0067-001B-H(11-20) 30/03/2005, 2:56 PM18