COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable.
Preparation 1 Confirm which remote control you have Your TV comes with one of the four remote controls shown below. Functions you can operate differ depending on the type of remote control.
Preparation 3 Connecting the aerial and VCR • Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. • Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack.
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes, S-VIDEO signals or component video signals.
Preparation 6 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.
Basic operation • The illustration below is for the remote control RM-C1010. Depending on the applicable models, the remote controls may not look exactly the same. POWER MUTING SYSTEM CINEMA COLOUR SOUND SURROUND ECO SENSOR DISPLAY 1 Press the POWER button to turn your TV on. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again.
Remote control buttons and functions ECO SENSOR button You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV. Press this button to select the desired mode. DIGITAL ECO SENSOR DISPLAY: The ECO SENSOR function switches on. In this mode, the clover mark indicating the brightness of your room is displayed for ro0[(r)22.
Remote control buttons and functions button CINEMA SURROUND button < S series only > < AV - 21 L S 2 / AV - 21 L X 2 / AV - 2 9 L S 2 / AV-29LX2 does not included > You can select a sound setting for stereo broadcast programmes and bilingual programmes. Press this button to select a sound setting. : Stereo sound : Bilingual I (sub I) sound : Bilingual II (sub II) sound : Monaural sound MONO : Cancels the multi-sound function, and the sound becomes monaural.
Remote control buttons and functions OFF TIMER button RETURN + button You can set the TV to automatically turn off after a set time. You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch. Press this button to select the period of time. • You can set the period of time to a maximum of 120 minutes in 10 minute increments. • 1 minute before the OFF TIMER function turns off the TV, “GOOD NIGHT!” appears.
Viewing teletext programmes < S series only > Using the List Mode Ι/ΙΙ TV/TEXT TV/TEXT TV/VIDEO 1 2 3 4 5 6 7 8 9 0 -/-- OFF TIMER To store the page numbers: PICTURE MODE CHANNEL RETURN+ SCAN CHANNEL 1 Press the MODE button to engage the List mode. The stored page numbers are displayed at the bottom of the screen.
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. You can return to the index page instantly. Each time you press the REVEAL button, text is hidden or revealed. In the List mode: Returns to the page number displayed in the lower left area of the screen. HOLD You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the HOLD button.
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the MENU / buttons to change function settings. SYSTEM CINEMA COLOUR SOUND SURROUND DISPLAY button MENU / buttons ECO SENSOR DISPLAY Example: MENU Ι/ΙΙ MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON VIDEO-2 SET COMPONENT TV/TEXT TV/VIDEO 1 2 3 OFF TIMER 4 Changes the AUTO SHUTOFF setting.
Using the TV’s menus INPUT VNR You can view images from VCRs or other devices connected to your TV. You can reduce picture noise. 1 Press MENU T to display the “MENU 1” menu, then select “INPUT”. MENU 1 TV ON ON 00 INPUT VNR COMPRESS(16:9) PICTURE TILT SELECT BY OPERATE BY -+ 1 Press MENU T to display the “MENU 1” menu, then select “VNR”. MENU INPUT VNR COMPRESS(16:9) PICTURE TILT SELECT BY OPERATE BY -+ EXIT BY DISPLAY 2 Press MENU / to select the VIDEO mode. TV mode changes to VIDEO mode.
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast. You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO SHUTOFF”.
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed. You can adjust the picture as you like. 1 Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY OPERATE BY -+ 1 Press MENU T to display the “MENU 4” menu.
Using the TV’s menus AI VOLUME AUTO CH PRESET You can prevent the sudden increase or decrease of volume that occurs when changing channels or switching VIDEO modes. You can automatically preset all TV channels that can be received by your TV to channels. 1 Press MENU T to display the “MENU 5” menu, then select “AI VOLUME”. MENU BASS TREBLE BALANCE AI VOLUME SELECT BY OPERATE BY -+ 5 1 Press MENU T to display the “MENU 3” menu, then select “AUTO CH PRESET”.
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV channels to desired channels. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. MANUAL FINE SKIP SOUND SYSTEM EXIT NO B/G 2 Hold VOLUME m down to fine-tune the TV channel so that the best image is displayed on screen. EXIT BY DISPLAY 2 Press MENU / . The sub-menu is displayed. MANUAL FINE SKIP SOUND SYSTEM EXIT 1 Press MENU t to select “FINE”.
Using the TV’s menus SKIP You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SCAN button. • Channels to which TV channels have not been preset are automatically set to be skipped. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. 2 Press MENU / . The sub-menu is displayed. 3 Press MENU T to select “SKIP”. MANUAL FINE SKIP SOUND SYSTEM EXIT 2 Press MENU / to select language.
TV buttons and parts Front 3 4 2 1 V L/MONO 8 7 5 6 0 - R IN (VIDEO-3) 1 2 V L/MONO 3 4 5 6 87 R IN (VIDEO-3) 0 - V L/MONO R MENU CHANNEL IN (VIDEO-3) VOLUME SUB POWER POWER 9 0 EXIT 2 3 4 5 7 8 - 1 2 3 4 5 MENU CHANNEL VOLUME 7 0 - 8 POWER V L/MONO IN (VIDEO-3) R EXIT 1 2 3 4 5 7 8 0 - 20 LCT1170-001B-H 20 8/22/02, 10:57 AM
TV buttons and parts 1 2 3 4 5 7 8 9 0 - SUB POWER POWER 1 2 V 1 2 3 4 5 6 L/MONO R IN (VIDEO-3) 3 4 5 7 MENU CHANNEL VOLUME EXIT - SUB POWER POWER 7 8 9 0 - Headphone jack VIDEO-3 terminal MENU button CHANNEL m buttons VOLUME m buttons TV/VIDEO button 8 9 0 ECO sensor Remote control sensor SUB POWER lamp POWER lamp Main power button For AV-25KX3/AV-21DX3/AV-21FX3/AV-20NX3: When the main power is switched on, the POWER lamp turns red.
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function is set to “OFF”. When the CHILD LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD LOCK” on page 15. You can operate functions in menus using the front control buttons on the TV. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press MENU y repeatedly to display the menu you want to use. 2 Press CHANNEL M to select a channel.
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. • Connect the power cord to the AC outlet. • Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Adjust the picture settings. (see page 16.
Specifications TV RF systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
Contents COLOUR TELEVISION INSTRUCTIONS Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Safety precautions Preparation 2 3 1 Confirm which remote control you have ... 2 Insert the batteries into the remote control ... 3 Connecting the aerial and VCR .................. 4 Connecting other devices .......................... 5 Connect the power cord to the AC outlet ... 6 Initial setting ..............
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION • Operate only from the power source indicated on the rear of the TV. • Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. • Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable.
Preparation 1 Confirm which remote control you have Your TV comes with one of the two remote controls shown below. Functions you can operate differ depending on the type of remote control.
Preparation 3 Connecting the aerial and VCR • Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method. • Turn off all the devices including the TV. • Connecting cables are not supplied. • When connecting monaural audio to the TV, use the L/MONO jack.
Preparation 4 Connecting other devices If you are not connecting any other devices, skip step 4 and perform step 5. • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. • The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes or component video signals.
Preparation 6 Initial setting When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings. 1 Press the Main power button on the TV. The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.
Basic operation • The illustration below is for the remote control RM-C1013. Depending on the applicable models, the remote controls may not look exactly the same. POWER MUTING CINEMA SYSTEM COLOUR SOUND SURROUND ECO SENSOR DISPLAY 1 Press the POWER button to turn your TV on. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again.
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV. If the picture is not clear or no colour appears, change the current colour system to another colour system. Press this button to select the desired mode. DIGITAL ECO SENSOR DISPLAY: The ECO SENSOR function switches on.
Remote control buttons and functions CINEMA SURROUND button MUTING button < AV2168TEE / AV2968TEE not included > You can turn the sound off instantly. You can enjoy an enhanced sound for a wider audience by using CINEMA SURROUND function. Press this button to select one of the CINEMA SURROUND mode. HIGH/LOW: When you listen to the stereo sound, please select HIGH mode or LOW mode. You can enjoy the sound for a wider audience similar to the experience at the theatre.
Remote control buttons and functions RETURN + button CHANNEL SCAN button You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch. You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view. To set the channel to the Return Channel: 1 Select the channel you want to set to the Return Channel. 2 Press this button and hold until the message “RETURN PLUS PROGRAMMED!” appears.
Viewing teletext programmes Using the List Mode TV/TEXT TV/TEXT TV/VIDEO 1 2 3 4 5 6 7 8 9 0 -/-- OFF TIMER To store the page numbers: PICTURE MODE CHANNEL RETURN+ SCAN CHANNEL VOLUME Coloured buttons TEXT REVEAL HOLD REVEAL HOLD SUBPAGE STORE INDEX You can store the numbers of your favourite teletext pages in the List mode and call them up quickly using the coloured buttons. SIZE MODE CANCEL SIZE INDEX CANCEL SUBPAGE 1 Press the MODE button to engage the List mode.
Viewing teletext programmes REVEAL INDEX Some teletext pages include hidden text (such as answers to a quiz). You can display the hidden text. You can return to the index page instantly. Each time you press the REVEAL button, text is hidden or revealed. In the List mode: Returns to the page number displayed in the lower left area of the screen. HOLD You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received. Press the HOLD button.
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 4 Press the MENU / buttons to change function settings. CINEMA SYSTEM COLOUR SOUND SURROUND DISPLAY button ECO SENSOR DISPLAY MENU t buttons MENU MENU / buttons Example: Changes the AUTO SHUTOFF setting.
Using the TV’s menus INPUT VNR You can view images from VCRs or other devices connected to your TV. You can reduce picture noise. 1 Press MENU T to display the “MENU 1” menu, then select “INPUT”. MENU 1 TV ON ON 00 INPUT VNR COMPRESS(16:9) PICTURE TILT SELECT BY OPERATE BY -+ 1 Press MENU T to display the “MENU 1” menu, then select “VNR”. MENU INPUT VNR COMPRESS(16:9) PICTURE TILT SELECT BY OPERATE BY -+ EXIT BY DISPLAY 2 Press MENU / to select the VIDEO mode. TV mode changes to VIDEO mode.
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast. You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO SHUTOFF”.
Using the TV’s menus VIDEO-2 SET Picture Adjustments Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed. You can adjust the picture as you like. 1 Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”.
Using the TV’s menus AI VOLUME AUTO CH PRESET You can prevent the sudden increase or decrease of volume that occurs when changing channels or switching VIDEO modes. You can automatically preset all TV channels that can be received by your TV to channels. 1 Press MENU T to display the “MENU 5” menu, then select “AI VOLUME”. MENU BASS TREBLE BALANCE AI VOLUME SELECT BY OPERATE BY -+ 5 1 Press MENU T to display the “MENU 3” menu, then select “AUTO CH PRESET”.
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV channels to desired channels. If the picture is not clear: Fine-tune the TV channel. 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. 1 Press MENU t to select “FINE”. MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH TEXT LANGUAGE GROUP1 SELECT BY OPERATE BY -+ NO B/G SELECT BY PR 1 VL PROGRAM BY -+ EXIT BY FINE BY VOL-+ DISPLAY EXIT BY DISPLAY 2 Press MENU / . The sub-menu is displayed.
Using the TV’s menus SKIP You can set undesired channels to be skipped. Channels set to be skipped cannot be selected by the CHANNEL m buttons nor the CHANNEL SCAN button. 2 Press MENU / to select language. The on-screen display indications are in the selected language. • Channels to which TV channels have not been preset are automatically set to be skipped. TEXT LANGUAGE 1 Press MENU T to display the “MENU 3” menu, then select “MANUAL CH PRESET”. You can select one of 5 teletext language groups.
TV buttons and parts Front 3 4 2 1 V L/MONO R IN (VIDEO-3) 20 5 6 8 7 9 -
TV buttons and parts 1 1 2 3 4 5 6 2 3 4 5 7 7 8 9 0 - Headphone jack VIDEO-3 terminal MENU button CHANNEL m buttons VOLUME m buttons TV/VIDEO button 8 9 - ECO sensor Remote control sensor POWER lamp STANDBY lamp Main power button AV-2555TEE only: When the Main power is on, the STANDBY lamp light is green. When press the POWER button on the remote control to turn the power on, the POWER lamp lights red.
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK function is set to “OFF”. When the CHILD LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. For details, see “CHILD LOCK” on page 15. You can operate functions in menus using the front control buttons on the TV. 1 Press CHANNEL M to turn the TV on from standby mode. 2 Press MENU y repeatedly to display the menu you want to use. 2 Press CHANNEL M to select a channel.
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. • Connect the power cord to the AC outlet. • Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Adjust the picture settings. (see page 16.
Specifications TV RF systems B, G, I, D, K, K1, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input VIDEO input, AUDIO L/R input VIDEO output , AUDIO L/R output stereo mini jack (3.
О Л О С УК О КС ЛУ бл год с о, о об л о л о LCT1178-001A-H 0702-Ki-NIC-JMT © 2002 VICTOR COMPANY OF JAPAN, LIMITED
л Б о с ос ДУ Д • Дл до о с ос о го л л к о ок л о сл ду до о о д !с до"д л л г . ДОС% • л о сл ду кл скл л о с о к г , ук д с го ко ус . • Сл ду б г о д л к ского о од лк . о кл л о о с л к ск о од сл ду с , д го лку. г лку о к о од сл ду .
одго о к 1 од д ул д с & о ко о ı! у с ' с ого у л , ' л о ко л к у с од д у$ ул о , ок о о ос ул с о го . $ . 2 (с к б к ул д с & о ого у л Сл уд л о с д б к о ук о у су к с особу, собл д оло л у о ! л у ол ос . О ! л о ко ! б к с л с д.
одго о к 3 одсо д + (- • Сл ду о 1уко одс о с ол о , ос л с с бо . 2 од одсо д о о л с о ук ого су к с ос о $ к с к бо . К о ого, о о бо с ус о л $ бо с ос о од одсо д . • Сл ду о кл с бо , о сл с л о . • Со д л о од об с о д л о.
одго о к 4 одсо д д уг бо о 'сл одсо д к к д уг бо , сл ду о ус у к 4 с у к у к у 5. • Сл ду с ол о голо у& к , обо удо с о г д (д о 3,5 ). Когд одсо д у& к , уко коло к л о о кл с . • л OUTPUT од д о уко с г л , ко о с о сл & & л о . о дубл о $ BM, со д с ло OUTPUT.
одго о к 6 * + ' + фо ' " ' о об " Когд л о кл с , к о л с $ о фо о об ф к JVC. Дл о бо к ого сл ду ол с ук! , ко о буду ок к . 1 Сл ду " гл у8 к о ку кл8* л о . Л POWER го с . осл ого, к к к о с ф к JVC, л о о ск д к ус о о $ о .
Ос о о о о с ол о • ок ул д с ! о ого у л RM-C1013. ул д с ! о ого у л , ос л с с л о ко о $ од л , огу о л с о ду о ул , ок ого у.
К о к фу к& ул д с & о ого у л К о к ECO SENSOR К о к COLOUR SYSTEM о л д л о к об о , об к о ск с лс о л ко с ос соо с с ос # & ко . д о фу к! с г у ку гл о бл л к о г л о о . Дл +бо бу 'ого " ' сл ду " д у8 к о ку.
К о к фу к& ул д с & о К о к CINEMA SURROUND < О су с у од л AV2168TEE / AV2968TEE > С о о# фу к! ОК1УM6NO?8 E УК о о об с улу & $ к с к у дл л ого сл л . Сл ду " у к о ку дл +бо од ого " 'о ОК У 9CD ; 0(УК. (AС/ 0: с офо ско ос о д ук б FС л ?E. с о олу ук, сс л о кол с о л , лог уко о у со о о д к о .
К о к фу к& ул д с & о ого у л К о к RETURN + К о к CHANNEL SCAN о с о к л, ко о с о с о , “ о к л ”. осл ого с о л бо с о д к л, ос о к о ку од . Д к о к д о о ос б с о ос о ог с $ л о $ к ло , ко о & л о , с о ск ог , ко о у $о с о .
ос'о ог '' л кс с ол о " ' С ск TV/TEXT TV/TEXT TV/VIDEO 1 2 3 4 5 6 7 8 9 0 -/-- OFF TIMER PICTURE MODE CHANNEL RETURN+ SCAN CHANNEL REVEAL HOLD REVEAL Дл о' о с &: VOLUME I к о к TEXT HOLD SUBPAGE STORE INDEX SIZE MODE CANCEL SIZE INDEX CANCEL SUBPAGE MODE STORE RM-C1013 о $ о & $ л б $ с ! л кс С ск с !.
ос'о ог '' л кс REVEAL ( ск + ) INDEX ( * ) ко о с ! л кс сод ск кс ( , о о ос к о ). о ок ск кс д с л . К "д+! , когд (+ " ' к о ку REVEAL, кс буд оо* д о л бо ок , л бо ск + . о г о о у с с !у с фо ! . Сл ду " к о ку INDEX. ( " ' “С ск ” с &: о # к о у с ! , ок о у л о углу к .
с ол о л о ого ' 8 Д л о скол ко фу к! , ко о о у л , с ол у дл ого . Дл ол о! ого с ол о с $ фу к! & го л о об$од о о , к к с ол о . 4 Дл ' ус о к фу к& сл ду " к о к MENU / .
с ол о л о ого ' 8 (JОД ( Д О K о с о об , ос у # 2 л д уг $ & $ бо о , одсо д $ к & у л о у. о с &у об . 1 Сл ду " MENU T дл ого, * об+ о лос “- C 1”, ' +б “(JОД”. +439 DОД >Д4О JСK:5C(16:9) PICTURE TILT 6Б :5C У- : Л -+ 1 TV КЛ КЛ 1 Сл ду " MENU T дл ого, * об+ о лос “- C 1”, ' +б “( Д О K ”.
с ол о л о ого ' 8 9(%О (AКЛCN о с о с о л о о ского о кл о су с с г л бл л о 15 у со око л о ого # . 1 Сл ду " MENU T дл ого, * об+ о лос “- C 2”, ' +б “9(%О (AКЛCN ”. +439 2 A 5О 6КЛ9<43>4 КЛ :+ОК О5 Д4548 КЛ С>3>8 ФО3 КЛ >Д4О-2 КО+-О3435368 6Б :5C У- : Л -+ 6DОД DISPLAY 2 Сл ду " MENU / дл +бо “(КЛ”.
с ол о л о ого ' 8 ( Д О-2 Сл ду с о ?Д'О-2 л о соо с с одо д о с г л & го бо , со д ого с ло VIDEO-2. 'сл с о к о д л о, об о с к . 1 Сл ду " MENU T дл ого, * об+ о лос “- C 2”, ' +б “( Д О-2”. о с о об к, к к с . 1 Сл ду " MENU T дл ого, * об+ о лос “- C 4”. I .
17
с ол о л о ого ' 8 УN 9B 9С% О;К9 о д л о с о у с особо бу л о к л бу о к ло . 1 Сл ду " MENU T дл ого, * об+ о лос “- C 3”, ' +б “ УN 9B 9С% О;К9”. +439 3 A 5О 3:С5 О8К: У<3:= 3:С5 О8К: = 6К УССК>8 = 6К 54Л454КС5: Г У--: 1 6Б :5C У- : Л -+ 6DОД DISPLAY 2 Сл ду " MENU / . д с л о с суб . У<3:= 5О<3:= - О-УС5>5C С>С54+: УК: 685> 6Б :5C - ОГ .
с ол о л о ого ' 8 О УС% %L о с о л о к, об у к л б л о у# . К л , с о о уск, л б к о к CHANNEL m, к о ко CHANNEL SCAN. • о ! л к л , ко о л о к л с о , буду о уск с о ск . 1 Сл ду " MENU T дл ого, * об+ о лос “- C 3”, ' сл ду +б “ УN 9B 9С% О;К9”. 2 Сл ду " MENU / . д с л о с суб .
Д л к о к л о д л 3 4 2 1 V L/MONO R IN (VIDEO-3) 20 5 6 8 7 9 -
Д л к о к л о 1 1 2 3 4 5 6 7 2 3 4 5 Г до голо $ у' ко 5 л VIDEO-3 К о к MENU К о к CHANNEL m К о к VOLUME m К о к TV/VIDEO "КОС43СО 7 8 9 - 8 С со ул д с о ого у л 9 Л POWER 0 Л STANDBY - Гл к о к кл! ол ко дл од л AV-2555TEE: Когд л о кл Гл о к о ко кл , л STANDBY го л с о .
с ол о к о ок ( го л о Ос о о о о с ол о • Сл ду удос о с , о фу к! E62ОК О Д' '8 кл - с о “ 6КЛ”. 'сл фу к! блок о к кл - с о “ КЛ” - л о буд у л с ос дс о к о ок д л . Бол од об у фо ! с . с . 15 д л “E62ОК О Д' '8”. 1 Сл ду " CHANNEL M дл кл8* л о , од гос " ' го о ос к бо . 2 Сл ду " CHANNEL M дл +бо к л .
Ус с ос ! 'сл об о су с у л л о бо , о , л с л о обл од д $ . 'сл обл одол с д осл од о д $ , о . % л о кл8* с ло о об " • Сл ду гл у к о ку од л к о л о . • Сл ду одсо д л к о о од к оду ого ок . • Сл ду к о ку COLOUR SYSTEM дл бо д уго ! о о с с . (С . с . 8.
С & ф к & С с '+ TV RF B, G, I, D, K, K1, M = о + с с '+ PAL, SECAM, NTSC 3,58+Г , NTSC 4,43 +Г ' '+ к л+ * с о + 3 к к л VHF (VL), сок к л VHF (VH), к л UHF (U). - к б л к л с д д с о , су д о г д о .