Projection Television Users Guide

Button Functions
57
Turns the TV on or off.
Press the POWER button
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)
Power
Number Buttons - 10Key Pad
Tune
Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGIATL-IN for video
devices like VCR’s DVD players, or camcorders.
Press the INPUT button
By every press of the INPUT button, you can change the input mode.
Notes:
When you return to TV mode, press the RETURN + button or direct 10 key pad.
You can also access the FRONT CONTROL PANEL screen by using the MENU button on
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing MENU
on the front panel and choose a mode by using the CHANNEL +/-
buttons (
OPERATE
®
).
Input
Use these buttons to move up or down all the available channels your TV is able to receive.
Channel +/–
Use these buttons to raise or lower the TV’s volume level.
Volume +/–
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (One)
2 (Two)
Press the TUNE button
LCT1609 English 3/8/04, 11:03 AM57