Operation Manual

VIDEO RECORDING
20 EN
MasterPage: Left
Time Code
During recording, a time code is recorded on the
tape. This code is to confirm the location of the
recorded scene on the tape during playback.
* Frames are not displayed during recording.
If recording starts from a blank portion, the time
code begins counting from “00:00:00”
(minute:second:frame). If recording starts from
the end of a previously recorded scene,
the time code continues from the last time code
number. If during recording a blank portion is left
partway through the tape, the time code is
interrupted. When recording is resumed, the
time code starts counting up again from
“00:00:00”. This means the camcorder may
record the same time codes as those existing in
a previously recorded scene. To prevent this,
perform Recording From The Middle Of A Tape
(墌 pg. 20) in the following cases;
● When shooting again after playing back a
recorded tape.
● When power shuts off during shooting.
● When a tape is removed and re-inserted during
shooting.
● When shooting using a partially recorded tape.
● When shooting on a blank portion located partway
through the tape.
● When shooting again after shooting a scene then
opening/closing the cassette holder cover.
NOTES:
● The time code cannot be reset.
● During fast-forwarding and rewinding, the time
code indication does not move smoothly.
● The time code is displayed only when “TIME
CODE” is set to “ON”. (墌 pg. 20, 26)
Recording From The Middle Of A Tape
1) Play back a tape or use Blank Search
(墌 pg. 22) to find the spot at which you want to
start recording, then engage the Still Playback
mode. (墌 pg. 21)
2) Set the Power Switch to “REC” while
pressing down the Lock Button located on the
switch, then start recording.
Auto/Manual Mode
Press AUTO button repeatedly to switch to auto/
manual recording mode. When manual mode is
selected, the indicator “M” appears on the LCD
monitor.
Auto Mode: A
You can record using no special effects or
manual adjustments.
Manual Mode: M
Manual recording is possible by setting various
functions.
12:34:24
Minutes
Seconds
Frames*
(25 frames = 1 second)
Display
M
GR-D720EK_GR-D740EK.book Page 20 Wednesday, January 31, 2007 4:04 PM