Memory Recorder Instruction Manual

12
Values indicated in parentheses in the table below are default
settings.
Menu Screen Configurations
and Functions
Setting Item Setting Values Functions
SYSTEM For setting the format of the video to be recorded or played back. Make sure
that the settings are consistent with those of the camcorder. Otherwise,
recording and playback cannot be executed.
RESOLUTION (720), 1080 For setting the resolution.
FRAME/RATE RESOLUTION: When 720 is set
(60p), 30p, 50p, 25p, 24p
For setting the frame rate. The configurable frame rate may vary according to
the [RESOLUTION] setting.
RESOLUTION: When 1080 is set
(60i), 50i
LCD For setting the contrast and backlight of the memory recorder’s LCD panel.
CONTRAST MAX, +4, +3, +2, +1, (0), -1, -2,
-3, -4, MIN
For adjusting the contrast.
BACKLIGHT OFF
(ON)
AUTO
OFF : Backlight is turned off at all times.
ON : Backlight is turned on at all times.
AUTO: Backlight turns on when the buttons are operated. Light turns off
automatically about five seconds after the buttons are operated.
DELETE For deleting a clip.
● This function is disabled when recording is in progress.
● Clips indicated with an Aok markB cannot be deleted.
NOW CLIP NO
YES
Deletes the currently selected clip when in the play mode. Deletes the clip that
is last recorded when in the stop or standby mode.
YES : Delete clips. (Press the [INFO/CLR] button.)
NO : Do not delete clips. (Press the [STOP] button.)
ALL CLIP NO
YES
Deletes all clips.
YES : Delete clips. (Press the [INFO/CLR] button.)
NO : Do not delete clips. (Press the [STOP] button.)
OK CLIP For important clips or clips that you do not want to delete, specify them as AOK
clipB. Upon specifying a clip as an AOK clipB, an Aok markB will appear to the
right of the clip name on the clip selection screen.
NOW CLIP NONE
OK
For specifying a selected clip as an AOK clipB when in the playback mode. For
specifying the clip that is last recorded as an AOK clipB when in the stop or
standby mode.
NONE: Do not specify an AOK clipB. (Press the [PLAY/STILL] button.)
OK : Specify an AOK clipB. (Press the [PLAY/STILL] button.)
ALL OK NO
YES
For specifying all clips as AOK clipsB.
YES : Specify as AOK clipsB. (Press the [INFO/CLR] button.)
NO : Retain current settings. (Press the [STOP] button.)
ALL NONE NO
YES
Cancels all AOK clipB specifications.
YES : Cancel AOK clipB specifications. (Press the [INFO/CLR] button.)
NO : Retain current settings. (Press the [STOP] button.)
TC SET1 For configuring settings related to the time code of the memory recorder.
TC SOURCE (INT)
EXT
For selecting the source of the time code.
INT : The time code runs according to the value of the memory recorder’s
time code generator.
EXT : The time code runs according to the value of the time code from the
camcorder.
When [EXT] is selected, make sure to set the [TC GENE.] switch of the
camcorder to AFREEB.
GENERATOR FREE
(RECRUN)
REGEN
For selecting the run mode of the time code generator.
● Setting is enabled when [TC SOURCE] is set to AINTB .
FREE : The time code runs according to the preset value in the free run
mode.
RECRUN : The time code runs according to the preset value when in the
recording mode.
REGEN : The time code runs continuously according to the last time code on
the SxS memory card.
DROP
FRAME
(NON DROP)
DROP
For selecting the non drop frame or drop frame mode.
● Setting is enabled when [TC SOURCE] is set to AINTB .
● Setting is enabled when the frame rate is set to 60 or 30.
NON DROP : Non drop frame mode
DROP : Drop frame mode
KA-MR100G_EN.book Page 12 Thursday, February 5, 2009 5:28 PM