Memory Recorder Instruction Manual

5
Getting Started
During Recording or Stop Mode
Displays the status screen.
A
Modes
B Remaining capacity
Displays the remaining time (minutes) of the SxS memory card.
C Date
Shows the date of the built-in clock. The month/day/year
display format can be specified on the [CLOCK2]-[DATE
STYLE] screen of the menu screen.
ASetting the Date/TimeB (A Page 7, 13)
D
Time
Shows the time of the built-in clock. The time display format
(12-hour/24-hour) can be specified on the [CLOCK2]-[TIME
STYLE] screen of the menu screen.
ASetting the Date/TimeB (A Page 7, 13)
E Video format
Shows the video format selected on the [SYSTEM] screen of
the menu screen.
“Video format settings” (A Page 12)
F
Time code/User bit
Displays the time code or user bit to be recorded. Press the
[INFO/CLR] button to toggle the display.
00:00:00:00 : Time code
0F 0F 0F 0F : User bit
M
emo:
● The time code display differs depending on whether non
drop frame or drop frame mode has been selected in the
[DROP FRAME] setting.
G Total number of clips
Displays the total number of clips recorded in the SxS
memory card.
H
Clip name
Displays the name of the clip that is going to be recorded.
The clip name can be specified on the [CLIP NAME] screen
of the menu screen. “Changing clip name or resetting the clip
number” (A Page 13)
M
emo:
● A ANO CARDB message is shown when an SxS memory
card is not inserted.
●
A A CARD PROTECT B mark is shown before the clip if
the write-protect switch of the SxS memory card is turned
on.
During Playback Mode
Displays the clip selection screen.
I
Modes
J Video format
Displays the video format of the selected clip.
“Video format settings” (A Page 12)
K
Clip name
● The clip indicated by the cursor ( ) is the selected clip.
● A ANO CLIPB message is shown when no clip is found.
L Playback position bar
Displays the progress of the currently played clip in the form
of a bar.
“Memory recorder’s time code settings” (A Page 12)
M Clip information
Displays various information related to the selected clip.
Press the [INFO/CLR] button to toggle the clip information
display.
00:00:00:00 : Playback time code
0F 0F 0F 0F : Playback user bit
RD 09/07/08: Date on which clip is recorded
(month/day/year)
RT 11:11:11 : Time on which clip is recorded
(hour:minute:second)
Dr 00:10:00 : Clip length (duration) (hour:minute:second)
Note:
● The playback time code value is not an accurate
representation. Use it as a guide for the playback position.
N
Selected clip/Total number of clips
LCD Panel Displays
--- SxS memory card is not inserted
oSTOP Stop
RREC Recording
WSTBY Standby (pause)
Non drop frame mode 00:00:00:00
Drop frame mode 00:00:00:00
B
A
F
E
D
C
H
G
Card protect mark
WS Still IPPlaying
NF1 Fast forward
(low speed)
OR1 Fast reverse
(low speed)
NF2 Fast forward
(high speed)
OR2 Fast reverse
(high speed)
mark A check mark ( ) appears before clips
that are playable.
ok mark Appears after the clip name. You can
specify the Aok markB on the [OK CLIP]
screen of the menu screen.
“Menu screen’s [OK CLIP] settings”
(A Page 12)
K
I
J
L
M
N
KA-MR100G_EN.book Page 5 Thursday, February 5, 2009 5:28 PM