ENGLISH ESPAÑOL DVD/CD RECEIVER RECEPTOR CON DVD/CD RÉCEPTEUR DVD/CD FRANÇAIS KD-ADV38/KD-AVX33 KD-ADV38 KD-AVX33 For canceling the display demonstration, see page 5. Para cancelar la demonstración en pantalla, consulte la página 5. Pour annuler la démonstration des affichages, référez-vous à la page 5. For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
How to reset your unit INTRODUCTION Playable disc type ............................ 4 Before operating the unit ................ 5 ENGLISH Contents OPERATIONS Basic operations—Control panel ...... 7 Basic operations— Remote controller (RM-RK251) ...... 8 Listening to the radio ...................... 10 Disc operations ................................ 13 Dual Zone operations ....................... 26 USB operations ................................ 29 Bluetooth® operations— Cellular phone/audio player ..
ENGLISH Playable disc type Disc type Recording format, file type, etc. DVD DVD Video (Region Code: 1)*1 Playable DVD Audio DVD-ROM DVD Recordable/Rewritable DVD Video (DVD-R*2/-RW, +R/+RW*3) DVD-VR (non-CPRM only) • DVD Video: UDF bridge DivX/MPEG1/MPEG2 • DVD-VR JPEG • DivX/MPEG1/MPEG2/JPEG/MP3/ 4 WMA/WAV/AAC: Compliant to MP3/WMA/WAV/AAC* ISO 9660 level 1, level 2, Romeo, MPEG4 Joliet DVD+VR • DVD-RAM cannot be played.
Cancel the display demonstration and set the clock. (☞ also pages 49 and 50) • Operations are explained mainly using the buttons on the unit; however, the buttons on the remote controller can work in the same way if they have the same names or marks. ENGLISH Before operating the unit Setup menu icon AV Menu Setup ENT Enter Currently selected menu Indication language: ~ Ÿ ! ⁄ In this manual, English indications are used for purpose of explanation.
ENGLISH (twice) Clock Time Set 12Hours/24Hours OSD Clock 1:00AM ¤ # ‹ fi Return to the menu. Select ]
Select the source. TUNER = SAT (SIRIUS/XM) = DISC (DVD/VCD/CD) = USB =CD-CH, iPod, D.PLAYER, or EXT-IN =Bluetooth Phone =Bluetooth Audio = AV-IN =(back to the beginning) • You cannot select these sources if they are not ready. Change the control panel • Turn on the power. • Display or erase *1. tilt (Tilt1 – Tilt4). • Turn off the power • Activate Voice Dialing [Hold]. [Hold]. • Attenuate the sound (if Adjust the volume. Change the display information. the power is on).
ENGLISH Basic operations — Remote controller (RM-RK251) Main elements and features Installing the battery R03/LR03/AAA If the range or effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). The unit is equipped with the steering wheel remote control function.
DVD/DivX 6: Shows the disc menu. VCD: Resumes PBC playback (☞ page 21). DVD-VR: Shows the Original Program screen. 7 Makes selection/settings. ~: Skips back or forward by 5 minutes for DivX/MPEG1/MPEG2. • DISC +/– buttons: Changes discs for “CD-CH.” 8 Shows the on-screen bar. 9*1 Changes the display information. p Display or erase . q For disc/USB operations: • 6: Plays/pauses. • 5/∞ DVD: Selects the title/group. DVD-VR: Selects the program/play list.
ENGLISH Listening to the radio Band POWER]ON Preset No. TUNER FLAT ☞ page 46 FM1 Preset1 ABC Radio 87.5 MHz MO DX 3: 45PM Assigned station name (☞ page 47). If no name is assigned, “No Name” appears. Tuner indicators ~ Ÿ ! Select “TUNER.” Select the bands. Search for a station—Auto Search. • Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it repeatedly. • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
FM station automatic presetting —SSM (Strong-station Sequential Memory) This function works only for FM bands. Once you have activated this function (selected ), it always works when searching for FM stations. 1 This function works only for FM bands. You can preset six stations for each band.
ENGLISH Manual presetting Selecting preset stations Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. On the remote: 1 1 2 or 2 Tune in to a station you want to preset. No Name 92.5 MHz On the unit: 3 FM1 Store 1 2 3 4 5 ENT ENT or Preset List appears.* 1 6 4 87.5 89.9 97.9 105.9 108.0 107.9 FM1 Select a preset number. Store 1 2 3 FM1 Store 1 2 3 4 5 6 5 87.5 89.9 97.9 105.9 108.0 107.9 ENT 4 5 6 ENT 87.5 89.9 97.9 92.5 108.0 107.
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. ENGLISH Disc operations If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. Insert the disc. Playback starts automatically.
ENGLISH While playing the following discs, press . • Each time you press the button, playback picture and disc information screens appear alternately. Disc type Audio format DVD VIDEO Surround mode DIGITAL T 01 C 02 MULTI 0:45:38 CHAP. RPT 4 ¢ Press: Select chapter Hold: Reverse/forward search*1 5∞ Select title 3: 45PM Playback mode Title no./Chapter no.
DivX ENGLISH DVD FRONT 2CH T 01 C 02 0:45:38 Current Folder Name Current File Name.avi RPT 4 ¢ Press: Select track Hold: Reverse/forward search for DivX/MPEG *2 5∞ Press: Select folder Hold: Display Folder List 3: 45PM For DivX/MPEG: Folder no./Track no./Playing time For JPEG: Folder no./File no. PBC indicator lights up when PBC is in use. ☞ page 46 VCD PBC FLAT 02 0:45:38 3: 45PM 4 ¢ Press: Select track Hold: Reverse/forward search*1 Track no./Playing time *1 Search speed: x2 ] x10.
ENGLISH ☞ page 46 CD FLAT 02 0:45:38 Disc Title Artist Name Current Track Title RPT 3: 45PM 4 ¢ Press: Select track Hold: Reverse/forward search*1 Disc title/Artist Name/Track title (only for CD Text)*3 Audio format (MP3/WMA/WAV/AAC) CD Track no./Playing time ☞ page 46 MP3 FLAT T 01 02 0:45:38 Current Folder Name Current File Name.mp3 RPT 3: 45PM Folder no./Track no.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random AV Menu Off 4 Setup ENT Enter Repeat Off Track Folder 2 AV Menu ENT Mode ENT Enter Mode menu icon Disc type Set When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen. To cancel, select in step 3 or in step 4.
ENGLISH Selecting tracks on the list Prohibiting disc ejection If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback. You can lock a disc in the loading slot. 1 Folder List My Best Cinema Pops My Best2 Favorite Song Cinema2 Off NO EJECT? EMERGENCY EJECT? ENT To cancel the prohibition, repeat the same procedure to select “EJECT OK?”. Folder List appears. • Hold the button to see the next/previous folders. 2 “No Eject” appears.
: : Stop playback. Start playback/Pause (if pressed during playback). : : : *1 *1 Erases the misentry of the number. *2 Search speed: x2 ] x5 ] x10 ] x20 ] x60 *3 Slow motion speed: 1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2 *4 Search speed: x2 ] x10 Reverse/forward search.*2 (No sound can be heard.) (Slow motion*3 during pause. No sound can be heard.) Press: Select chapter (during playback or pause). Hold: Reverse/forward search.*4 Select title (during playback or pause). = = : Select chapter.
ENGLISH : : Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) : Press: Select track. Hold: Reverse/forward search.*3 (No sound can be heard.) : Select folder. = = : Select track (within the same folder). (twice) = = : Select folder. : Select aspect ratio. : Select audio language. (DivX only) : Select subtitle language. (DivX only) For DivX6: Using menu driven features 1 2 Select an item you want to start playback.
: : Stop playback. : Start playback. (Slide show: each file is shown for a few seconds.) Shows the current file until you change it if pressed during Slide show. : Select track. : : Select folder. : : : : : = Select track. : . 1 2 Start the desired track. = = • To resume PBC, press / . *1 *2 *3 *4 *5 Erases the misentry of the number.
ENGLISH Playing back a bonus group Enjoying surround sounds If a DVD Audio including a “bonus group” is detected, the BONUS indicator lights up on the disc information screen. You can enjoy multi-channel surround playback through the front, center, surround speakers. • After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker (☞ page 52). • All surround mode can also be used for “USB.” To play a bonus group...
4 ENT Set • You cannot change the settings using the remote controller. • Auto: When multi-channel digital signals come in, “MULTI” surround is activated. When 2-channel or 2.1-channel signals come in, “4CH STEREO” is activated. • Through: All incoming channel signals are sent to the corresponding speakers. • Dolby PLII Movie: Activates Dolby Pro Logic II Movie. • Dolby PLII Music: Activates Dolby Pro Logic II Music. You can adjust and settings.
ENGLISH Operations using the on-screen bar (DVD/VCD/DivX/MPEG1/MPEG2/ JPEG) These operations are possible on the monitor using the remote controller. 1 Display the on-screen bar. (☞ page 25) 2 Select an item. 3 Make a selection. If a pop-up menu appears... • For entering time/numbers... : Move the entry position : Select a number To remove the on-screen bar 24 AVX33_J 24 07.2.
Information Operation DVD -V TIME C. RPT TITLE CHAP ENGLISH On-screen bar T02-C03 TOTAL 1:25:58 RPT Above example is of DVD Video. Items shown on the bar vary due to the disc type. 1 Disc type 2 • DVD: Audio signal format • VCD: PBC 3 Playback mode*1 DVD Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD Audio: T. RPT: Track repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG: T. RPT: Track repeat F. RPT: Folder repeat JPEG: F. RPT: Folder repeat VCD: T. INT: Track intro T.
ENGLISH Dual Zone operations You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source than “USB” through the speakers. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. 1 On the remote controller: 1 2 Adjust the volume through the 2nd AUDIO OUT plug. 3 Operate the DVD/CD player.
MODE REPEAT TRACK Track Information Album Four seasons Artist Robert M. Smith Title Rain Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. • If necessary, press ENT to start playback. 00:14 Track : 6 / 14 Cloudy Fair Fog Hail Indian summer Rain Shower Snow Thunder Typhoon Wind Winter sky Ex.: CD Text 1 Playback mode selection window: appears when OSD is pressed (☞ below).
ENGLISH Operations using the list screen List screen for DVD-VR You can use Original Program and Play List screen anytime while playing DVD-VR with its data recorded. For discs except DVD, VCD, and CD While Dual Zone is on, these operations are possible on the external monitor using the remote controller. 1 While not playing... 1 Display the list screen.
You can connect a USB mass storage class device such as a USB memory, Digital Audio player*1, portable HDD, etc. to the unit. ~ Connect a USB device. ENGLISH USB operations USB cable from the rear of the unit. • You cannot connect a computer to the USB ( ) terminal of the unit. Ÿ Select “USB”. 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder Hold: Display Folder List DISP: Press if no playback picture appears , but disc information screen (☞ pages 14 to 16) is displayed.
ENGLISH Caution: • • • • • • Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while “Now Reading...” is flashing on the monitor. Do not start the car engine if a USB device is connected. Stop playback before disconnecting a USB device. Make sure all important data has been backed up to avoid losing the data.
Connecting a Bluetooth device for the first time ENGLISH Bluetooth® operations — Cellular phone/audio player Pairing and PIN Code Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The bluetooth devices can be connected without cables and communicate each other. • The serial number is printed on the label placed on the bottom of the unit.
7 ENGLISH Registering using 1 Select “Bluetooth Phone” or “Bluetooth Audio.” Bluetooth Phone FLAT Operate the target Bluetooth device. (While “Open...” is flashing on the screen.) Enter the same PIN code (as entered in the above step) on the device to be connected. NEW DEVICE Now connection is established and you can use the device through the unit. 3: 45PM Select “NEW DEVICE” by pressing 5 / ∞. The device remains registered even after you disconnect the device.
Deleting a registered device Perform steps 1 to 3 of “Registering using ” on page 32, then... 1 Select “Bluetooth Phone” or “Bluetooth Audio,” then select a registered device you want to delete. 2 Perform steps 2 and 3 of “Registering using ” on page 32, then... • Select , then . 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit displays the list of the preset devices. 2 Select a device you want to connect. 3 Use (or ) to connect.
ENGLISH Using the Bluetooth cellular phone Adjust the volume*1 POWER]ON Turns Blue when the Bluetooth device is connected. Bluetooth Phone FLAT Connected Device Name ☞ page 46 Connected device name *3 *4 3: 45PM Press: Display Answer incoming call Hold: Display list ~ Ÿ ! Status of the device*2 Signal strength/Battery remainder *1 You can adjust the volume level for “Bluetooth Phone” without affecting the volume level for other sources.
Making a call 1 If the cellular phone is compatible with Text message and is set to (☞ page 57), the unit rings and “Receiving Message” appears on the monitor to inform you of the arrival of the message. • You cannot edit or send a message through the unit. Display the . ENGLISH When a Text message comes in... P902i Redial Received Calls Phonebook Missed Calls Phone number Annie 2 Select the method to make a call.
ENGLISH How to enter phone number Presetting the phone numbers On the remote: You can preset up to six phone numbers. 1 On the unit: Display the phone number you want to preset by using one of items. Jack 1 Select a number. ENT Store ENT Dial 12312341234 09898765432 09845671234 Move the entry position. Ex.: “Jack” is selected from the phone book Preset Memory list appears. • To delete an unwanted digit, select blank space.
You can use the following buttons on the remote controller for the Bluetooth phone operations. For details, ☞ pages 8 and 9. AV Menu Setup ENT Enter ENT Enter ENGLISH • Preset List can also be accessed through = . AV Menu List List menu icon Using the Bluetooth audio player Reverse/forward skip POWER]ON Turns Blue when the Bluetooth device is connected.
ENGLISH Listening to the CD changer POWER]ON Disc no./Track no./Playing time CD-CH FLAT 01 01 0:02:38 Disc Title Artist Name Current Track Title 3: 45PM “No Name” appears for conventional CDs 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder (MP3 only) Hold: Display Disc List It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can play only CDs (CD-DA) and MP3 discs.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random Off AV Menu 4 Setup ENT Repeat Off Track Disc Enter 2 AV Menu ENT Mode ENT Set When one of the playback modes is selected, the corresponding indicator lights up on the monitor. Enter Mode menu icon To cancel, select in step 3 or in step 4.
ENGLISH Listening to the satellite radio Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. • JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio. • XMDirectTM Universal Tuner Box—With a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening to the XM Satellite radio.
POWER]ON Preset no. SIRIUS/XM Band SAT ENGLISH DISP: Switches the display to program information—artist name/song name (/composer name: only for SIRIUS Satellite radio). Channel no. ☞ page 46 FLAT XM1 Preset1 01ch Category Name Channel Name 3: 45PM Category name Signal strength Channel name For SIRIUS Radio ~ Ÿ Select “SAT.” ! ⁄ For XM Radio Select “SAT.” Select the bands. ~ Ÿ Select a category. ! Select a category. • To select a channel from all categories, select “All.
ENGLISH Storing channels in memory Selecting on the lists You can preset six channels for each band. Ex.: Storing a channel into preset number 5 You can select a channel using one of the following lists—Preset list/Category list/Channel list. 1 1 Tune in to a channel you want. SAT XM1 3Bch Rock XM Music Club Setup 2 3: 45PM 2 Display the Preset List.
POWER]ON Track no./Playing time 4 ¢: Press: Select track Hold: Reverse/forward search D.PLAYER ☞ page 46 FLAT 01 0:45:38 Album Name Artist Name Track Title 5∞ 5 : Enter player’s menu ∞ : Pause/stop playback • To resume, press again. 3: 45PM It is required to connect the interface adapter (KSPD100 for Apple iPod or KS-PD500 for JVC D. player) to the CD changer jack on the rear. Preparation: Make sure or is selected for the external input setting.
ENGLISH Listening to other external components AV-INPUT You can connect an external component to the LINE IN/VIDEO IN plugs. • You can also connect a Navigation System to the VIDEO IN plug so that you can watch the navigation screen (Make sure is selected for ). (☞ page 53) POWER]ON Assigned title (☞ page 47) AV-IN ☞ page 46 FLAT AV-INPUT 3: 45PM ~ Ÿ Press if no playback picture appears, but source information (this) screen is displayed. Select “AV-IN.
You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). POWER]ON Assigned title (☞ page 47) EXT-IN ☞ page 46 ENGLISH EXT-INPUT FLAT EXT-INPUT 3: 45PM Preparation: Make sure is selected for the external input setting. (☞ page 53) ~ Ÿ Select “EXT-IN.” Turn on the connected component and start playing the source. 45 AVX33_J 45 EXTERNAL DEVICES 07.2.
ENGLISH Sound equalization POWER]ON Edit +03 60.0 Hz ENT Store Selecting sound mode Storing your own adjustment ~ You can store your adjustment into User1, User2, and User3. AV Menu 1 Setup Ÿ ENT Repeat steps ~ and Ÿ, then in step !... Equalizer Flat Hard Rock R&B Pop Jazz Enter Equalizer menu icon ENT Exit AV Menu Edit +03 Equalizer ENT Enter 60.0 Hz ! Select a sound mode. 2 Adjust. 3 Store.
Press: Change character set Hold: Erase title POWER]ON ENGLISH Assigning titles to the sources Title Entry Station Name ABC Radio DISP A a 0 Á á ENT Store You can assign titles as follows. FM/AM stations Up to 16 characters—up to 30 stations AV-IN Up to 16 characters EXT-IN 3 • If you try to assign a title to a 31st station, “Name Full” flashes on the monitor. Delete unwanted titles before assignment. Ex.
ENGLISH Menu operations POWER]ON Setup Equalizer Sound Disc Surround AV Menu Setup ENT Mode List Bluetooth Dual Zone ! Ex. Changing the setting ~ Enter Sound Fader/Balance Volume Adjust Subwoofer High Pass Filter Crossover Through AV Menu Setup ENT Enter Non-available items will be displayed being shaded. ⁄ Ÿ • For some items, repeat this steps to set the sub-items.
Initial: Underlined Display ENGLISH Setup Menu items Selectable settings, [reference page] Demonstration Off : Cancels. On : Activates the demonstration on the monitor. Wall Paper You can select the background picture of the monitor. Future-Blue, Future-Green, Wave-Blue, Wave-Green, Wave-Pink, Metal-A, Metal-B, Ball-A, Ball-B, Ball-C, Dolphin, Simple-Red, Simple-Purple, Simple-Blue, Simple-Gray Scroll Off : Cancels. Once : Scrolls the disc information once.
ENGLISH Menu items 3 Aspect* Selectable settings, [reference page] You can change the aspect ratio of the picture. Aspect ratio of incoming signal 4:3 16:9 Display Full : For 16:9 original pictures Auto : • For “DISC”: Aspect ratio is automatically selected to match to the incoming signals. • For the other video sources: Aspect ratio is fixed to . Clock Regular : For 4:3 original pictures *3 *4 *5 *6 Language*4 Select the indication language shown on the monitor.
Selectable settings, [reference page] Menu Language Select the initial disc menu language; Initial English (☞ also page 64). Audio Language Select the initial audio language; Initial English (☞ also page 64). Subtitle Select the initial subtitle language or erase the subtitle (); Initial Off (☞ also page 64). OSD Language Select the on-screen language used for the external monitor connected to the VIDEO OUT plug; Initial English.
ENGLISH Menu items Selectable settings, [reference page] D. (Dynamic) Range Compres. (Compression)*7 You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto : Select to apply the effect to multi-channel encoded software. On : Select to always use this function. Speaker Size*7 You can adjust the speaker size setting.
Tuner IF Band Width Auto : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Wide : Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. Area Setting US : When using in North/Central/South America. FM/AM intervals are set to 200 kHz/10 kHz. Europe : When using in any other areas. FM/AM intervals are set to 50 kHz (100 kHz during auto search)/9 kHz.
Others ENGLISH Beep Off : Cancels. On : Activates the key-touch tone. Telephone Muting*14 Off : Cancels. Muting1, Muting2 : Select either one which mutes the sounds while using the cellular phone. Initialize Initialize all settings you have made in . Press ENT, then reset the unit. (☞ page 3) *14 The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).
Selectable settings, [reference page] Crossover Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz Amplifier Gain You can change the maximum volume level of this unit. Off : Deactivates the built-in amplifier. Low Power : VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W.) High Power : VOL 00 to 50 Rear Speaker*16 You can activate/deactivate the rear speakers.
ENGLISH List The accessible lists differ depending on the sources. ☞ [12, 18, 37, 39] Bluetooth*20 Menu items Selectable settings, [reference page] Dial Menu Only for the device connected for “Bluetooth Phone.” Select the method to make a call. ☞ [35] Message Only for the device connected for “Bluetooth Phone.”*21 You can read a message from the following message histories. Unread : Messages you have not read. Read : Messages you have read. Unsent : Messages you have not sent.
Settings Selectable settings, [reference page] Auto Connect*22 When the unit is turned on, the connection is established automatically with... Off : No Bluetooth device. Last : The last connected Bluetooth device. Order : The available registered Bluetooth device found at first. Auto Answer*23 Off : The unit does not answer the calls automatically. Answer the calls manually. On : The unit answers the incoming calls automatically. Reject : The unit rejects all incoming calls.
ENGLISH Maintenance How to clean the connector To keep discs clean Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
Playing Recordable/Rewritable discs General • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • This unit can recognize a total 25 characters for file/ folder names. • Some discs or files may not be played back due to their characteristics or recording conditions.
• This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3). This unit can also show WAV/WMA/AAC Tag. • This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time indication. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format. – WMA files which are not based upon Windows Media® Audio.
Bluetooth operations General • While driving, do not perform complicated operation such as dialling the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. • This unit may not work for some Bluetooth devices. • Connecting condition may vary depending on circumstances around you. • When the unit is turned off, the device is disconnected.
ENGLISH Satellite radio operations Menu settings • You can also connect the JVC SIRIUS radio PnP (Plug and Play), using the JVC SIRIUS radio adapter, KSU100K (not supplied) to the CD changer jack on the rear. (Select “EXT-IN” as the source.) By turning on/off the power of the unit, you can turn on/off the JVC PnP. However, you cannot control it from this unit. • To know more about SIRIUS Satellite radio or to sign up, visit .
150 Hz 400 Hz 1 kHz 2.5 kHz 6.
ENGLISH Language codes (for DVD/DivX language selection) Code Language Code Language Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV MG MI MK ML MN MO MR MS MT MY NA NE NO OC OM OR PA PL PS PT QU RM RN RO RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU
What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • No sound comes out of the center speaker. General • The monitor is not clear and legible. • The unit does not work at all. • The remote controller does not work. Disc playback FM/AM • “No Signal” appears. Remedies/Causes • Center speaker is not activated. (☞ page 52) Once you have reset the unit, make sure to activate the speaker again.
Disc playback File playback ENGLISH Symptoms Remedies/Causes • No playback picture appears on the monitor. Parking brake lead is not connected properly. (☞ Installation/Connection Manual) • Connect the video cord correctly. • Select the correct input on the external monitor. Changing the source by pressing SOURCE will solve this error. • Change the disc. • Record the tracks using a compliant application in the appropriate discs. (☞ page 4) • Add appropriate extension codes to the file names.
Remedies/Causes • Bluetooth device does not detect the unit. • Bluetooth • • • • • • CD changer • • • • • • This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. The unit does not detect the Bluetooth • Check the Bluetooth setting of the device. device. • Search from the Bluetooth device.
Satellite radio ENGLISH Symptoms • “CALL 1-888-539-SIRIUS TO SUBSCRIBE” appears on the monitor. • “No Signal” or “NO SIGNAL” appears on the monitor. • “No Antenna” or “CHECK ANTENNA” appears on the monitor. • “Invalid Channel” appears on the monitor for about 5 seconds, then returns to the previous display when listening to the SIRIUS Satellite radio. • “CHANNEL–––” appears on the display for about 2 seconds, then returns to the previous channel while listening to the XM Satellite radio.
• The iPod/D. player does not turn on or does not work. iPod/D. player playback • The sound is distorted. • “Disconnect” appears on the monitor. • For iPod: Playback stops. • No sound can be heard. • “Error 01” appears on the monitor when connecting a D. player. • “No Files” or “No Track” appears on the monitor. • “Reset 01” – “Reset 07” appears on the monitor. • “Reset 08” appears on the monitor. • The iPod’s or D. player’s controls do not work after disconnecting from this unit.
ENGLISH Specifications Signal-to-Noise Ratio: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N 80 dBA (reference: 1 W into 4 Ω) Load Impedance: Equalizer Control Range: Frequencies: DVD/CD FM/AM TUNER AMPLIFIER Power Output: Level: Line-Out Level/Impedance: Audio Output Level LINE OUT (FRONT/ Output Impedance: REAR)/CENTER OUT/ SUBWOOFER: Color System: Video Output (composite): Other Terminals: Input: 4 Ω (4 Ω to 8 Ω allowance) 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 15 kHz ±10 dB 5.
3.5 inch wide liquid crystal display Number of Pixel: 211 200 pixels: 960 (horizontal) × 220 (vertical) Drive Method: TFT (Thin Film Transistor) active matrix format Color System: PAL/NTSC Aspect Ratio: 16:9 (wide) ENGLISH MONITOR USB BLUETOOTH GENERAL Screen Size: Allowable Storage Temperature: –10°C to +60°C (14°F to 140°F) Allowable Operating Temperature: 0°C to +40°C (32°F to 104°F) USB Standards: USB 1.1 Data Transfer Rate: Full Speed: Maximum 12 Mbytes Low Speed: Maximum 1.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR © 2007 Victor Company of Japan, Limited Rear_KD-AVX33J.indd 2 0207MNMMDWJEIN 07.2.
KD-ADV38 KD-AVX33 LVT1658-002A [J] Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ENGLISH 0207MNMMDWJEIN EN, SP, FR ©2007 Victor Company of Japan, Limited FRANÇAIS ESPAÑOL This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
INSTALLATION (IN-DASH MOUNTING) INSTALACIÓN (MONTAJE EN EL TABLERO DE INSTRUMENTOS) INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS CONEXIONES ELECTRICAS RACCORDEMENTS ELECTRIQUES To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation. Para evitar cortocircuitos, recomendamos que desconecte el terminal negativo de la batería y que efectúe todas las conexiones eléctricas antes de instalar la unidad.
ENGLISH A ESPAÑOL FRANÇAIS Connecting the parking brake lead / Conexión del cable del freno de estacionamiento / Connexion du cordon de frein de stationnement Connect the parking brake lead to the parking brake system built in the car. Conecte el cable del freno de estacionamiento al sistema de freno de estacionamiento del automóvil. Connectez le fil de frein de stationnement au système de frein de stationnement.
A Connecting to the steering wheel remote controller / Conexión al control remoto del volante de dirección / Connexion de la télécommande de volant If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. For connection, an exclusive remote adapter (not supplied) which matches your car is required. For details, consult the same car audio dealer as where the unit is purchased.
D Connecting external components / Conexión de otros componentes externos / Connexion des appareils extérieurs You can connect external components in series as shown in the diagram below. • All the components, adapters or signal cords need to be purchased separately. Los componentes externos se pueden conectar en serie, tal como se muestra en el diagrama siguiente. • Todos los componentes, adaptadores o cables de señal se deben comprar separadamente.
ENGLISH DEUTSCH DVD/CD RECEIVER DVD-/CD-RECEIVER RÉCEPTEUR DVD/CD DVD/CD-RECEIVER NEDERLANDS FRANÇAIS KD-AVX33 For canceling the display demonstration, see page 5. Zum Abbrechen der Displaydemonstration siehe Seite 5. Pour annuler la démonstration des affichages, référez-vous à la page 5. Zie bladzijde 5 voor het annuleren van de displaydemonstratie. For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC 0536 English: Hereby, JVC, declares that this KD-AVX33 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. Español: Por medio de la presente JVC declara que el KD-AVX33 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Svenska: Härmed intygar JVC att denna KD-AVX33 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Lietuviu: Šiuo JVC deklaruoja, kad šis KD-AVX33 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Íslenska: Hér með lýsir JVC yfir því að KD-AVX33 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
How to reset your unit INTRODUCTION Playable disc type ............................ 4 Before operating the unit ................ 5 ENGLISH Contents OPERATIONS Basic operations—Control panel ...... 7 Basic operations— Remote controller (RM-RK251) ...... 8 Listening to the radio ...................... 10 Disc operations ................................ 15 Dual Zone operations ....................... 28 USB operations ................................ 31 Bluetooth® operations— Cellular phone/audio player ..
ENGLISH Playable disc type Disc type Recording format, file type, etc. DVD DVD Video (Region Code: 2)*1 Playable DVD Audio DVD-ROM DVD Recordable/Rewritable DVD Video (DVD-R*2/-RW, +R/+RW*3) DVD-VR (non-CPRM only) • DVD Video: UDF bridge DivX/MPEG1/MPEG2 • DVD-VR JPEG • DivX/MPEG1/MPEG2/JPEG/MP3/ 4 WMA/WAV/AAC: Compliant to MP3/WMA/WAV/AAC* ISO 9660 level 1, level 2, Romeo, MPEG4 Joliet DVD+VR • DVD-RAM cannot be played.
Cancel the display demonstration and set the clock. (☞ also pages 51 and 52) • Operations are explained mainly using the buttons on the unit; however, the buttons on the remote controller can work in the same way if they have the same names or marks. ENGLISH Before operating the unit Setup menu icon AV Menu Setup ENT Enter Currently selected menu Indication language: ~ Ÿ ! ⁄ In this manual, English indications are used for purpose of explanation.
ENGLISH (twice) Clock Time Set 12Hours/24Hours OSD Clock Clock Adjust 0:00 ¤ # ‹ fi Return to the menu. Select ], then activate the screen. 12Hours/24Hours 12 Hours 24 Hours Set the clock time. Time Set Hours ^ fl & ‡ 18 : 00 ENT Exit Time Set Minutes 18 : 35 ENT $ › % Select either the 12-hour or 24-hour system. Exit * Return to the menu. ENT Exit Return to the menu. Select . Activate the screen.
Select the source. TUNER = DAB = DISC (DVD/VCD/CD) = USB =CD-CH, iPod, D.PLAYER, or EXT-IN =Bluetooth Phone =Bluetooth Audio = AV-IN =(back to the beginning) Activate TA Standby Reception. • You cannot select these sources if they are not ready. Show PTY preset list [Hold]. 1 • Display or erase * . • Turn on the power. • Activate Voice Dialing [Hold]. • Turn off the power [Hold]. • Attenuate the sound (if Change the display information. Adjust the volume. the power is on).
ENGLISH Basic operations — Remote controller (RM-RK251) Main elements and features Installing the battery R03/LR03/AAA If the range or effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). The unit is equipped with the steering wheel remote control function.
On menus: • 5 / ∞: Select items. • 4 / ¢: Goes to previous/next step. w TUNER/DAB: Selects the bands. DISC/USB: Stop playback. Bluetooth Phone: Ends the call. Bluetooth Audio: Plays/pauses. On menus: Back. e*2 Adjusts the volume level through the 2nd AUDIO OUT plug. (☞ page 28) r*2 Activates or deactivates Dual Zone. t*1*2 Selects the sound mode. y • DVD Video/DivX 6: Shows the disc menu. • VCD: Resumes PBC playback. (☞ page 23) • DVD-VR: Shows the Play List screen.
ENGLISH Listening to the radio Band POWER]ON PS (station name) for FM RDS. If no signal is coming in, “No Name” appears. Preset No. TUNER FLAT FM1 Preset1 Bayern Radio 87.5 MHz TP AF MO Tuner/Standby Reception indicators ~ Ÿ ! ☞ page 48 Pop M DX 15: 45 PTY code for FM RDS Select “TUNER.” Select the bands. Search for a station—Auto Search. • Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it repeatedly.
2 Tuning in to stations with sufficient signal strength This function works only for FM bands. Once you have activated this function (selected ), it always works when searching for FM stations. 1 Mode 3 ENT ENGLISH AV Menu Enter Mode menu icon Mode Mono DX/Local SSM PTy Standby AV Menu Start ENT Setup ENT Enter ENT Enter Local FM stations with the strongest signals are searched and stored automatically in the FM band. 2 AV Menu Manual presetting Mode Ex.
ENGLISH Selecting preset stations The following features are available only for FM RDS stations. On the remote: 1 Searching for FM RDS programme—PTY Search 2 or You can search for your favorite programmes being broadcast by selecting the PTY code for your favorite programmes. On the unit: 1 PTy Search 1 Pop Music 2 Rock Music 3 Easy Listening 4 Serious Classics 5 Current Affairs 6 Varied Speech ENT Available PTY codes appear (including six preset PTY codes). or 1 FM1 Store 1 2 3 4 5 6 87.
Activating/deactivating TA/PTY Standby Reception You can store your favorite PTY codes into the PTY Preset List. 1 PTy Search 1 Pop Music 2 Rock Music 3 Easy Listening 4 Serious Classics 5 Current Affairs 6 Varied Speech ENT Available PTY codes appear (including six preset PTY codes). 2 Select a PTY code to store into the List. PTy Search Cultures Science Varied Speech Pop Music Rock Music Easy Listening ENT Current PTY Preset List is shown on the display.
ENGLISH Activating PTY Standby Reception 1 Tracing the same programme— Network-Tracking Reception AV Menu Setup ENT Enter ENT Enter When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals.
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. ENGLISH Disc operations If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. Insert the disc. Playback starts automatically.
ENGLISH While playing the following discs, press . • Each time you press the button, playback picture and disc information screens appear alternately. Disc type Audio format DVD VIDEO DIGITAL T 01 C 02 Surround mode MULTI 0:45:38 CHAP. RPT 15: 45 4 ¢ Press: Select chapter Playback mode Hold: Reverse/forward search*1 5∞ Select title VR-PR: Original program VR-PL: Play List DVD VR-PR DIGITAL P 01 C 02 Title no./Chapter no.
DivX ENGLISH DVD FRONT 2CH T 01 C 02 0:45:38 Current Folder Name Current File Name.avi 15: 45 RPT 4 ¢ Press: Select track Hold: Reverse/forward search for DivX/MPEG *2 5∞ Press: Select folder Hold: Display Folder List For DivX/MPEG: Folder no./Track no./Playing time For JPEG: Folder no./File no. PBC indicator lights up when PBC is in use. ☞ page 48 VCD PBC FLAT 02 0:45:38 15: 45 4 ¢ Press: Select track Hold: Reverse/forward search*1 Track no./Playing time *1 Search speed: x2 ] x10.
ENGLISH ☞ page 48 CD FLAT 02 0:45:38 Disc Title Artist Name Current Track Title RPT 15: 45 4 ¢ Press: Select track Hold: Reverse/forward search*1 Disc title/Artist Name/Track title (only for CD Text)*3 Audio format (MP3/WMA/WAV/AAC) CD Track no./Playing time ☞ page 48 MP3 FLAT T 01 02 0:45:38 Current Folder Name Current File Name.mp3 RPT 4 ¢ Press: Select track Hold: Reverse/forward search*1 5∞ Press: Select folder Hold: Display Folder List 15: 45 Folder no./Track no.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random AV Menu Off 4 Setup ENT Enter Repeat Off Track Folder 2 AV Menu ENT Mode ENT Enter Mode menu icon Disc type Set When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen. To cancel, select in step 3 or in step 4.
ENGLISH Selecting tracks on the list Prohibiting disc ejection If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback. You can lock a disc in the loading slot. 1 Folder List My Best Cinema Pops My Best2 Favorite Song Cinema2 Off NO EJECT? EMERGENCY EJECT? ENT To cancel the prohibition, repeat the same procedure to select “EJECT OK?”. Folder List appears. • Hold the button to see the next/previous folders. 2 “No Eject” appears.
: : : *1 Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) (Slow motion*3 during pause. No sound can be heard.) : Press: Select chapter (during playback or pause). Hold: Reverse/forward search.*4 Select title (during playback or pause). = = : Select chapter. Select title (when not playing). (twice) = = : Select title (during playback or pause). : Select aspect ratio. : Select audio language. : Select subtitle language.
ENGLISH : : Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search*2. (No sound can be heard.) : Press: Select track. Hold: Reverse/forward search*3. (No sound can be heard.) : Select folder. For DivX6: Using menu driven features = = : Select track (within the same folder). (twice) = Select folder. = : : Select aspect ratio. 1 2 Select an item you want to start playback. : Select audio language. (DivX only) : Select subtitle language.
: : Stop playback. : Start playback. (Slide show: each file is shown for a few seconds.) Shows the current file until you change it if pressed during Slide show. : Select track. : : Select aspect ratio. = = : Select track (within the same folder). (twice) = = : Select folder. : : : : Start playback/Pause (if pressed during playback). : Reverse/forward search*4. : Press: Select track. Hold: Reverse/forward search*6. Select folder. : Stop playback. Select folder.
ENGLISH Playing back a bonus group Enjoying surround sounds If a DVD Audio including a “bonus group” is detected, the BONUS indicator lights up on the disc information screen. You can enjoy multi-channel surround playback through the front, center, surround speakers. • After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker (☞ page 53). • All surround mode can also be used for “USB.” To play a bonus group...
4 ENT Set • You cannot change the settings using the remote controller. • Auto: When multi-channel digital signals come in, “MULTI” surround is activated. When 2-channel or 2.1-channel signals come in, “4CH STEREO” is activated. • Through: All incoming channel signals are sent to the corresponding speakers. • Dolby PLII Movie: Activates Dolby Pro Logic II Movie. • Dolby PLII Music: Activates Dolby Pro Logic II Music. You can adjust and settings.
ENGLISH Operations using the on-screen bar (DVD/VCD/DivX/MPEG1/MPEG2/ JPEG) These operations are possible on the monitor using the remote controller. 1 Display the on-screen bar. (☞ page 27) 2 Select an item. 3 Make a selection. If a pop-up menu appears... • For entering time/numbers... : Move the entry position : Select a number To remove the on-screen bar 26 KD-AVX33[E]_0130.indb 26 07.2.
Information Operation DVD -V TIME C. RPT TITLE CHAP ENGLISH On-screen bar T02-C03 TOTAL 1:25:58 RPT Above example is of DVD Video. Items shown on the bar vary due to the disc type. 1 Disc type 2 • DVD: Audio signal format • VCD: PBC 3 Playback mode*1 DVD Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD Audio: T. RPT: Track repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG: T. RPT: Track repeat F. RPT: Folder repeat JPEG: F. RPT: Folder repeat VCD: T. INT: Track intro T.
ENGLISH Dual Zone operations You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source than “USB” through the speakers. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. 1 On the remote controller: 1 2 Adjust the volume through the 2nd AUDIO OUT plug. 3 Operate the DVD/CD player.
MODE REPEAT TRACK Track Information Album Four seasons Artist Robert M. Smith Title Rain Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. • If necessary, press ENT to start playback. 00:14 Track : 6 / 14 Cloudy Fair Fog Hail Indian summer Rain Shower Snow Thunder Typhoon Wind Winter sky Ex.: CD Text 1 Playback mode selection window: appears when OSD is pressed (☞ below).
ENGLISH Operations using the list screen List screen for DVD-VR For discs except DVD, VCD, and CD While Dual Zone is on, these operations are possible on the external monitor using the remote controller. You can use Original Program and Play List screen anytime while playing DVD-VR with its data recorded. • These screens can be displayed on the built-in monitor and the external monitor. While not playing... 1 1 Display the list screen. Display the Original Program/Play List screen.
You can connect a USB mass storage class device such as a USB memory, Digital Audio player*1, portable HDD, etc. to the unit. ~ Connect a USB device. ENGLISH USB operations USB cable from the rear of the unit. • You cannot connect a computer to the USB ( ) terminal of the unit. Ÿ Select “USB”. 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder Hold: Display Folder List DISP: Press if no playback picture appears , but disc information screen (☞ pages 16 to 18) is displayed.
ENGLISH Caution: • • • • • • Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while “Now Reading...” is flashing on the monitor. Do not start the car engine if a USB device is connected. Stop play back before disconnecting a USB device. Make sure all important data has been backed up to avoid losing the data.
Connecting a Bluetooth device for the first time ENGLISH Bluetooth® operations — Cellular phone/audio player Pairing and PIN Code Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The bluetooth devices can be connected without cables and communicate each other. • The serial number is printed on the label placed on the bottom of the unit.
7 ENGLISH Registering using 1 Select “Bluetooth Phone” or “Bluetooth Audio.” Bluetooth Phone FLAT Operate the target Bluetooth device. (While “Open...” is flashing on the screen.) Enter the same PIN code (as entered in the above step) on the device to be connected. NEW DEVICE Now connection is established and you can use the device through the unit. 15: 45 Select “NEW DEVICE” by pressing 5 / ∞. The device remains registered even after you disconnect the device.
Deleting a registered device Perform steps 1 to 3 of “Registering using ” on page 34, then... 1 Select “Bluetooth Phone” or “Bluetooth Audio,” then select a registered device you want to delete. 2 Perform steps 2 and 3 of “Registering using ” on page 34, then... • Select , then . 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit displays the list of the preset devices. 2 Select a device you want to connect. 3 Use (or ) to connect.
ENGLISH Using the Bluetooth cellular phone POWER]ON Adjust the volume*1 Turns Blue when the Bluetooth device is connected. Bluetooth Phone ☞ page 48 FLAT Connected Device Name Connected device name*3 *4 15: 45 Status of the device*2 Signal strength/Battery remainder Press: Display Answers incoming call Hold: Display list ~ Ÿ ! *1 You can adjust the volume level for “Bluetooth Phone” without affecting the volume level for other sources.
Making a call 1 If the cellular phone is compatible with SMS (Short Message Service) and is set to (☞ page 59), the unit rings and “Receiving Message” appears on the monitor to inform you of the arrival of the message. • You cannot edit or send a message through the unit. Display the . ENGLISH When an SMS comes in... P902i Redial Received Calls Phonebook Missed Calls Phone number Annie 2 Select the method to make a call.
ENGLISH How to enter phone number Presetting the phone numbers On the remote: You can preset up to six phone numbers. 1 On the unit: 1 Display the phone number you want to preset by using one of items. Jack Select a number. ENT Store ENT Dial 12312341234 09898765432 09845671234 Move the entry position. Ex.: “Jack” is selected from the phone book Preset Memory list appears. • To delete an unwanted digit, select blank space.
You can use the following buttons on the remote controller for the Bluetooth phone operations. For details, ☞ pages 8 and 9. AV Menu Setup ENT Enter ENT Enter ENGLISH • Preset List can also be accessed through = . AV Menu List List menu icon Using the Bluetooth audio player Reverse/forward skip Turns Blue when the Bluetooth *1 device is connected.
ENGLISH Listening to the CD changer POWER]ON Disc no./Track no./Playing time CD-CH FLAT 01 01 0:02:38 Disc Title Artist Name Current Track Title 15: 45 “No Name” appears for conventional CDs 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder (MP3 only) Hold: Display Disc List It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can play only CDs (CD-DA) and MP3 discs.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random Off AV Menu 4 Setup ENT Repeat Off Track Disc Enter 2 AV Menu ENT Mode ENT Set When one of the playback modes is selected, the corresponding indicator lights up on the monitor. Enter Mode menu icon To cancel, select in step 3 or in step 4.
ENGLISH Listening to the DAB tuner Preset No. TEXT indicator Band POWER]ON DAB TEXT DRC 4¢ ~ Ÿ ! ⁄ 5∞ AF ANN News 15: 45 PTY code Service label /Frequency, DAB indicators/Standby Ensemble label* channel Reception indicators Select “DAB.” * Information changes when you press DISP. While tuning in a service with DLS (Dynamic Label Segment), the TEXT indicator lights up. Select the bands. Searching for an ensemble.
On the unit: You can preset six DAB services (primary) for each band. 1 ENGLISH Manual presetting 1 2 2 DAB1 Search for a service you want to preset. 1 2 3 4 5 6 3 DAB1 1 2 3 4 5 6 Store Service Label No Serv. FFH No Serv. HRS HRH ENT ENT ENT 3 Select a preset service. DAB1 ENT 1 2 3 4 • Preset List can also be accessed through = (☞ right). 4 Store Service Label No Serv. FFH Bayern2 HRS HRH 5 6 Store Service Label No Serv.
ENGLISH 4 Activating/deactivating Announcement Standby Reception Announcement Standby Reception allows the unit to switch temporarily to your favorite service (announcement type). Announcement Standby Reception Indicator Activate , then select , (☞ below). ANN 5 Announce Standby Transport News Warning News Weather Event ENT 6 Flashes To deactivate, select in step 4, then press ENT once (☞ right).
POWER]ON Track no./Playing time 4¢: Press: Select track Hold: Reverse/forward search D.PLAYER ☞ page 48 FLAT 01 0:45:38 Album Name Artist Name Track Title 5∞ 5 : Enter player’s menu ∞ : Pause/stop playback • To resume, press again. 15: 45 It is required to connect the interface adapter (KSPD100 for Apple iPod or KS-PD500 for JVC D. player) to the CD changer jack on the rear. Preparation: Make sure or is selected for the external input setting.
ENGLISH Listening to other external components AV-INPUT You can connect an external component to the LINE IN/VIDEO IN plugs. • You can also connect a Navigation System to the VIDEO IN plug so that you can watch the navigation screen (Make sure is selected for ). (☞ page 55) POWER]ON Assigned title (☞ page 49) AV-IN ☞ page 48 FLAT AV-INPUT 15: 45 ~ Ÿ Press if no playback picture appears, but source information (this) screen is displayed. Select “AV-IN.
You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). POWER]ON Assigned title (☞ page 49) EXT-IN ☞ page 48 ENGLISH EXT-INPUT FLAT EXT-INPUT 15: 45 Preparation: Make sure is selected for the external input setting. (☞ page 55) ~ Ÿ Select “EXT-IN.” Turn on the connected component and start playing the source. 47 KD-AVX33[E]_0130.indb 47 EXTERNAL DEVICES 07.2.
ENGLISH Sound equalization POWER]ON Edit +03 60.0 Hz ENT Store Selecting sound mode Storing your own adjustment ~ You can store your adjustment into User1, User2, and User3. AV Menu 1 Setup Ÿ ENT Repeat steps ~ and Ÿ, then in step !... Equalizer Flat Hard Rock R&B Pop Jazz Enter Equalizer menu icon ENT Exit AV Menu Edit +03 Equalizer ENT Enter 60.0 Hz ! Select a sound mode. 2 Adjust. 3 Store.
Press: Change character set Hold: Erase title POWER]ON ENGLISH Assigning titles to the sources Title Entry AV-In Name MY BEST DISP A a 0 Á á You can assign titles to “AV-IN” and “EXT-IN.” Ex.: Assigning title to “AV-IN” ~ Ÿ ! ENT Store Assign a title. 1 Select a character, then move the entering position. Select “AV-IN.” Display the title entry screen. 1 AV Menu Setup ENT Enter ENT Enter 2 AV Menu ⁄ Mode • To change the character set, press DISP. (For available characters, ☞ page 65.
ENGLISH Menu operations POWER]ON Setup Equalizer Sound Disc Surround AV Menu Setup ENT Mode List Bluetooth Dual Zone ! Ex. Changing the setting ~ Enter Sound Fader/Balance Volume Adjust Subwoofer High Pass Filter Crossover Through AV Menu Setup ENT Enter Non-available items will be displayed being shaded. ⁄ Ÿ • For some items, repeat this steps to set the sub-items.
Initial: Underlined Display ENGLISH Setup Menu items Selectable settings, [reference page] Demonstration Off : Cancels. On : Activates the demonstration on the monitor. Wall Paper You can select the background picture of the monitor. Future-Blue, Future-Green, Wave-Blue, Wave-Green, Wave-Pink, Metal-A, Metal-B, Ball-A, Ball-B, Ball-C, Dolphin, Simple-Red, Simple-Purple, Simple-Blue, Simple-Gray Scroll Off : Cancels. Once : Scrolls the disc information once.
ENGLISH Menu items 3 Aspect* Selectable settings, [reference page] You can change the aspect ratio of the picture. Aspect ratio of incoming signal 4:3 16:9 Display Full : For 16:9 original pictures Auto : • For “DISC”: Aspect ratio is automatically selected to match to the incoming signals. • For the other video sources: Aspect ratio is fixed to . Disc Setup 1*5 Clock Regular : For 4:3 original pictures Language*4 Select the indication language shown on the monitor.
Selectable settings, [reference page] Monitor Type 16:9 4:3 Letterbox 4:3 Pan Scan Disc Setup 2 Disc Setup 1*5 OSD Position Position 1 Position 2 Select the monitor type to watch a wide screen picture on the external monitor. 16:9 : Select when the aspect ratio of the external monitor is 16:9. 4:3 Letterbox/4:3 Pan Scan : Select when the aspect ratio of the external monitor is 4:3. Refer to the illustrations on the left to see how the pictures are shown on the monitor.
ENGLISH Menu items Selectable settings, [reference page] Speaker Level You can adjust the output level of the activated speakers (☞ on page 53), monitoring the test tone. Front Lch/Center Ch/Front Rch/Rear Rch/Subwoofer*6/Rear Lch : adjust the output level of each speaker in the range of –10dB to +10dB; Initial 0dB. Select the speaker Disc Setup 2 Adjust the speaker level • Press and hold ENT to turn on and off the test tone.
AV Input You can determine the use of LINE IN and VIDEO IN plugs. Off : Select when no component is connected (“AV-IN” is skipped while selecting the source). Audio&Video : Select when connecting an AV component such as a VCR. Audio : Select when connecting an audio component such as a digital audio player. Camera*10: Select when connecting the rear view camera. Camera Mirror*10: The mirror image of the rear view is displayed on the monitor.
ENGLISH Equalizer Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [48] Sound Menu items Selectable settings, [reference page] Fader/Balance Adjust fader—speaker output balance between the front and rear speakers. • Upmost—front only • Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Menu items Selectable settings, [reference page] Surround Off Select to deactivate the surround function. Surround On Select to activate the surround function. ☞ [24] Auto, Through, Dolby PLII Movie, Dolby PLII Music • When you select Dolby PLII Music, you can adjust and .*17 ENGLISH Disc Surround*16 *16 Selectable only for “DISC” and “USB.” *17 This setting takes effect only when the center speaker is activated.
ENGLISH Bluetooth*19 Menu items Selectable settings, [reference page] Dial Menu Only for the device connected for “Bluetooth Phone.” Select the method to make a call. ☞ [37] Message Only for the device connected for “Bluetooth Phone.”*20 You can read a message from the following message histories. Unread : Messages you have not read. Read : Messages you have read. Unsent : Messages you have not sent. Sent : Messages you have sent. • The number of messages in each history is also shown on the monitor.
Settings Selectable settings, [reference page] Auto Connect*21 When the unit is turned on, the connection is established automatically with... Off : No Bluetoothdevice. Last : The last connected Bluetooth device. Order : The available registered Bluetooth device found at first. Auto Answer*22 Off : The unit does not answer the calls automatically. Answer the calls manually. On : The unit answers the incoming calls automatically. Reject : The unit rejects all incoming calls.
ENGLISH Maintenance How to clean the connector To keep discs clean Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
Playing Recordable/Rewritable discs General • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • This unit can recognize a total 25 characters for file/ folder names. • Some discs or files may not be played back due to their characteristics or recording conditions.
• This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3). This unit can also show WAV/WMA/AAC Tag. • This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time indication. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format. – WMA files which are not based upon Windows Media® Audio.
• Connection Error : The device is registered but the connection has failed. Use to connect the device again. (☞ page 35) • Error : Try the operation again. If “Error” appears again, check if the device supports the function you have tried. • Device Unfound : No available Bluetooth device is detected by . • Loading : The unit is updating the phone book and/ or SMS. • Please Wait... : The unit is preparing to use the Bluetooth function.
ENGLISH Notice: When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: For D. player users:
Code Language Code Language Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV MG MI MK ML MN MO MR MS MT MY NA NE NO OC OM OR PA PL PS PT QU RM RN RO RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • No sound comes out of the center speaker. General • The monitor is not clear and legible. • The unit does not work at all. • The remote controller does not work. Disc playback FM/AM • “No Signal” appears. Remedies/Causes • Center speaker is not activated. (☞ page 53) Once you have reset the unit, make sure to activate the speaker again.
Remedies/Causes • No playback picture appears on the monitor. Parking brake lead is not connected properly. (☞ Installation/Connection Manual) • Connect the video cord correctly. • Select the correct input on the external monitor. Changing the source by pressing SOURCE will solve this error. • Change the disc. • Record the tracks using a compliant application in the appropriate discs. (☞ page 4) • Add appropriate extension codes to the file names. The track played back is not a playable file format.
Symptoms Remedies/Causes ENGLISH • Bluetooth device does not detect the unit. • Bluetooth • • • • • • CD changer • • • • • • This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. The unit does not detect the Bluetooth • Check the Bluetooth setting of the device. device. • Search from the Bluetooth device.
• “No DAB Signal” appears on the monitor. • “Reset 08” appears on the monitor. • • • • iPod/D. player playback Remedies/Causes • • • • • • • • Move to an area with stronger signals. Connect this unit and the DAB tuner correctly, then reset the unit. (☞ page 3) The DAB tuner does not work at all. Connect this unit and the DAB tuner correctly, then reset the unit. (☞ page 3) “Antenna Power NG” appears on the monitor. Check the cords and connections. The iPod/D.
ENGLISH Specifications Maximum Power Output: Front/Rear: Continuous Power Output Front/Rear: (RMS): FM/AM TUNER AMPLIFIER Load Impedance: Equalizer Control Range: Level: Signal-to-Noise Ratio: Audio Output Level Line-Out Level/Impedance: LINE OUT (FRONT/ Output Impedance: REAR)/CENTER OUT/ SUBWOOFER: Color System: Video Output (composite): Other Terminals: Input: PAL 1 Vp-p/75 Ω LINE IN, VIDEO IN, MIC IN, USB input terminal, Aerial input Output: 2nd AUDIO OUT, VIDEO OUT Others: CD changer, OE REMOTE F
3.5 inch wide liquid crystal display Number of Pixel: 211 200 pixels: 960 (horizontal) × 220 (vertical) Drive Method: TFT (Thin Film Transistor) active matrix format Color System: PAL/NTSC Aspect Ratio: 16:9 (wide) Allowable Storage Temperature: –10°C to +60°C Allowable Operating Temperature: 0°C to +40°C USB Standards: USB 1.1 Data Transfer Rate Full Speed: Maximum 12 Mbytes Low Speed: Maximum 1.5 Mbytes Compatible Device: Mass storage class Compatible File System: FAT 32/16/12 Max.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Hebt u PROBLEMEN met de bediening? Stel het apparaat terug Zie de pagina met de paragraaf Het apparaat terugstellen Dear Customer, This apparatus is in conformance wit
KD-AVX33 Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting LVT1659-004A [E] ENGLISH 0207MNMMDWJEIN EN, GE, FR, NL ©2007 Victor Company of Japan, Limited This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC INCAR ENTERTAINMENT dealers.
INSTALLATION (IN-DASH MOUNTING) EINBAU (IM ARMATURENBRETT) INSTALLATION (MONTAGE DANS LE INSTALLATIE (INBOUW IN HET TABLEAU DE BORD) DASHBOARD) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation. Zur Vermeidung von Kurzschlüssen empfehlen wir, daß Sie den negativen Batterieanschluß abtrennen und alle elektrischen Anschlüsse herstellen, bevor das Gerät eingebaut wird.
ENGLISH C 1 DEUTSCH FRANÇAIS NEDERLANDS Connecting the Mic unit / Anschließen der Mikrofoneinheit / Connexion du microphone / Verbinden van de microfoon Microphone Microfon Microphone Microfoon J 2 Double-sided adhesive tape Doppelseitiges Klebeband Bande adhésive à double face Dubbelzijdig plakband or oder ou of Adjust the microphone angle Stellen Sie den Mikrofonwinkel ein Ajustez l’angle du microphone Stel de hoek van de microfoon in Secure the microphone cord using cord cramps (not supplied)
A Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant / Verbinden met de stuurwiel-afstandsbediening If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
D Connecting external components / Anschließen der externen Komponenten / Connexion des appareils extérieurs / Verbinden van externe componenten You can connect external components in series as shown in the diagram below. • All the components, adapters or signal cords need to be purchased separately. Sie können beide externe Komponenten in Reihe anschließen, wie in der Zeichnung unten gezeigt. • Alle Komponenten, Adapter oder Signalkabel müssen getrennt gekauft werden.
ENGLISH РУCCKИЙ DVD/CD RECEIVER ПРИЕМНИК ДЛЯ ВОСПРОИЗВЕДЕНИЯ ДИСКОВ DVD И КОМПАКТ-ДИСКОВ ПРИЙМАЧ З ПРОГРАВАЧЕМ DVD/CD-ДИСКІВ УКРАЇНА KD-AVX33 For canceling the display demonstration, see page 5. Информацию об отмене демонстрации функций дисплея см. на стр. 5. Інформацію щодо відміни демонстрації функцій дисплею див. на стор. 5. For installation and connections, refer to the separate manual. Указания по установке и выполнению соединений приводятся в отдельной инструкции.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
How to reset your unit INTRODUCTION Playable disc type ............................ 4 Before operating the unit ................ 5 ENGLISH Contents OPERATIONS Basic operations—Control panel ...... 7 Basic operations— Remote controller (RM-RK251) ...... 8 Listening to the radio ...................... 10 Disc operations ................................ 15 Dual Zone operations ....................... 28 USB operations ................................ 31 Bluetooth® operations— Cellular phone/audio player ..
ENGLISH Playable disc type Disc type Recording format, file type, etc. DVD DVD Video (Region Code: 5)*1 Playable DVD Audio DVD-ROM DVD Recordable/Rewritable DVD Video (DVD-R*2/-RW, +R/+RW*3) DVD-VR (non-CPRM only) • DVD Video: UDF bridge DivX/MPEG1/MPEG2 • DVD-VR JPEG • DivX/MPEG1/MPEG2/JPEG/MP3/ 4 WMA/WAV/AAC: Compliant to MP3/WMA/WAV/AAC* ISO 9660 level 1, level 2, Romeo, MPEG4 Joliet DVD+VR • DVD-RAM cannot be played.
Cancel the display demonstration and set the clock. (☞ also pages 51 and 52) • Operations are explained mainly using the buttons on the unit; however, the buttons on the remote controller can work in the same way if they have the same names or marks. ENGLISH Before operating the unit Setup menu icon AV Menu Setup ENT Enter Currently selected menu Indication language: ~ Ÿ ! ⁄ In this manual, English indications are used for purpose of explanation.
ENGLISH (twice) Clock Time Set 12Hours/24Hours OSD Clock Clock Adjust 0:00 ¤ # ‹ fi Return to the menu. Select ], then activate the screen. 12Hours/24Hours 12 Hours 24 Hours Set the clock time. Time Set Hours ^ fl & ‡ 18 : 00 ENT Exit Time Set Minutes 18 : 35 ENT $ › % Select either the 12-hour or 24-hour system. Exit * Return to the menu. ENT Exit Return to the menu. Select . Activate the screen.
Select the source. TUNER = DAB = DISC (DVD/VCD/CD) = USB =CD-CH, iPod, D.PLAYER, or EXT-IN =Bluetooth Phone =Bluetooth Audio = AV-IN =(back to the beginning) Activate TA Standby Reception. • You cannot select these sources if they are not ready. Show PTY preset list [Hold]. 1 • Display or erase * . • Turn on the power. • Activate Voice Dialing [Hold]. • Turn off the power [Hold]. • Attenuate the sound (if Change the display information. Adjust the volume. the power is on).
ENGLISH Basic operations — Remote controller (RM-RK251) Main elements and features Installing the battery R03/LR03/AAA If the range or effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). The unit is equipped with the steering wheel remote control function.
On menus: • 5 / ∞: Select items. • 4 / ¢: Goes to previous/next step. w TUNER/DAB: Selects the bands. DISC/USB: Stop playback. Bluetooth Phone: Ends the call. Bluetooth Audio: Plays/pauses. On menus: Back. e*2 Adjusts the volume level through the 2nd AUDIO OUT plug. (☞ page 28) r*2 Activates or deactivates Dual Zone. t*1*2 Selects the sound mode. y • DVD Video/DivX 6: Shows the disc menu. • VCD: Resumes PBC playback. (☞ page 23) • DVD-VR: Shows the Play List screen.
ENGLISH Listening to the radio Band POWER]ON PS (station name) for FM RDS. If no signal is coming in, “No Name” appears. Preset No. TUNER FLAT FM1 Preset1 Bayern Radio 87.5 MHz TP AF MO Tuner/Standby Reception indicators ~ Ÿ ! ☞ page 48 Pop M DX 15: 45 PTY code for FM RDS Select “TUNER.” Select the bands. Search for a station—Auto Search. • Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it repeatedly.
2 Tuning in to stations with sufficient signal strength This function works only for FM bands. Once you have activated this function (selected ), it always works when searching for FM stations. 1 Mode 3 ENT ENGLISH AV Menu Enter Mode menu icon Mode Mono DX/Local SSM PTy Standby AV Menu Start ENT Setup ENT Enter ENT Enter Local FM stations with the strongest signals are searched and stored automatically in the FM band. 2 AV Menu Manual presetting Mode Ex.
ENGLISH Selecting preset stations The following features are available only for FM RDS stations. On the remote: 1 Searching for FM RDS programme—PTY Search 2 or You can search for your favorite programmes being broadcast by selecting the PTY code for your favorite programmes. On the unit: 1 PTy Search 1 Pop Music 2 Rock Music 3 Easy Listening 4 Serious Classics 5 Current Affairs 6 Varied Speech ENT Available PTY codes appear (including six preset PTY codes). or 1 FM1 Store 1 2 3 4 5 6 87.
Activating/deactivating TA/PTY Standby Reception You can store your favorite PTY codes into the PTY Preset List. 1 PTy Search 1 Pop Music 2 Rock Music 3 Easy Listening 4 Serious Classics 5 Current Affairs 6 Varied Speech ENT Available PTY codes appear (including six preset PTY codes). 2 Select a PTY code to store into the List. PTy Search Cultures Science Varied Speech Pop Music Rock Music Easy Listening ENT Current PTY Preset List is shown on the display.
ENGLISH Activating PTY Standby Reception 1 Tracing the same programme— Network-Tracking Reception AV Menu Setup ENT Enter ENT Enter When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals.
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. ENGLISH Disc operations If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. Insert the disc. Playback starts automatically.
ENGLISH While playing the following discs, press . • Each time you press the button, playback picture and disc information screens appear alternately. Disc type Audio format DVD VIDEO DIGITAL T 01 C 02 Surround mode MULTI 0:45:38 CHAP. RPT 15: 45 4 ¢ Press: Select chapter Playback mode Hold: Reverse/forward search*1 5∞ Select title VR-PR: Original program VR-PL: Play List DVD VR-PR DIGITAL P 01 C 02 Title no./Chapter no.
DivX ENGLISH DVD FRONT 2CH T 01 C 02 0:45:38 Current Folder Name Current File Name.avi 15: 45 RPT 4 ¢ Press: Select track Hold: Reverse/forward search for DivX/MPEG *2 5∞ Press: Select folder Hold: Display Folder List For DivX/MPEG: Folder no./Track no./Playing time For JPEG: Folder no./File no. PBC indicator lights up when PBC is in use. ☞ page 48 VCD PBC FLAT 02 0:45:38 15: 45 4 ¢ Press: Select track Hold: Reverse/forward search*1 Track no./Playing time *1 Search speed: x2 ] x10.
ENGLISH ☞ page 48 CD FLAT 02 0:45:38 Disc Title Artist Name Current Track Title RPT 15: 45 4 ¢ Press: Select track Hold: Reverse/forward search*1 Disc title/Artist Name/Track title (only for CD Text)*3 Audio format (MP3/WMA/WAV/AAC) CD Track no./Playing time ☞ page 48 MP3 FLAT T 01 02 0:45:38 Current Folder Name Current File Name.mp3 RPT 4 ¢ Press: Select track Hold: Reverse/forward search*1 5∞ Press: Select folder Hold: Display Folder List 15: 45 Folder no./Track no.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random AV Menu Off 4 Setup ENT Enter Repeat Off Track Folder 2 AV Menu ENT Mode ENT Enter Mode menu icon Disc type Set When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen. To cancel, select in step 3 or in step 4.
ENGLISH Selecting tracks on the list Prohibiting disc ejection If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback. You can lock a disc in the loading slot. 1 Folder List My Best Cinema Pops My Best2 Favorite Song Cinema2 Off NO EJECT? EMERGENCY EJECT? ENT To cancel the prohibition, repeat the same procedure to select “EJECT OK?”. Folder List appears. • Hold the button to see the next/previous folders. 2 “No Eject” appears.
: : : *1 Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) (Slow motion*3 during pause. No sound can be heard.) : Press: Select chapter (during playback or pause). Hold: Reverse/forward search.*4 Select title (during playback or pause). = = : Select chapter. Select title (when not playing). (twice) = = : Select title (during playback or pause). : Select aspect ratio. : Select audio language. : Select subtitle language.
ENGLISH : : Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search*2. (No sound can be heard.) : Press: Select track. Hold: Reverse/forward search*3. (No sound can be heard.) : Select folder. For DivX6: Using menu driven features = = : Select track (within the same folder). (twice) = Select folder. = : : Select aspect ratio. 1 2 Select an item you want to start playback. : Select audio language. (DivX only) : Select subtitle language.
: Stop playback. : : Start playback. (Slide show: each file is shown for a few seconds.) Shows the current file until you change it if pressed during Slide show. : Select track. : : Select aspect ratio. = = : Select track (within the same folder). (twice) = = : Select folder. : : : Select folder. = = : Select track (within the same folder). (twice) = Select folder. = Select track. Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search*4.
ENGLISH Playing back a bonus group Enjoying surround sounds If a DVD Audio including a “bonus group” is detected, the BONUS indicator lights up on the disc information screen. You can enjoy multi-channel surround playback through the front, center, surround speakers. • After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker (☞ page 53). • All surround mode can also be used for “USB.” To play a bonus group...
4 ENT Set • You cannot change the settings using the remote controller. • Auto: When multi-channel digital signals come in, “MULTI” surround is activated. When 2-channel or 2.1-channel signals come in, “4CH STEREO” is activated. • Through: All incoming channel signals are sent to the corresponding speakers. • Dolby PLII Movie: Activates Dolby Pro Logic II Movie. • Dolby PLII Music: Activates Dolby Pro Logic II Music. You can adjust and settings.
ENGLISH Operations using the on-screen bar (DVD/VCD/DivX/MPEG1/MPEG2/ JPEG) These operations are possible on the monitor using the remote controller. 1 Display the on-screen bar. (☞ page 27) 2 Select an item. 3 Make a selection. If a pop-up menu appears... • For entering time/numbers... : Move the entry position : Select a number To remove the on-screen bar 26 Book 1.indb 26 07.2.
Information Operation DVD -V TIME C. RPT TITLE CHAP ENGLISH On-screen bar T02-C03 TOTAL 1:25:58 RPT Above example is of DVD Video. Items shown on the bar vary due to the disc type. 1 Disc type 2 • DVD: Audio signal format • VCD: PBC 3 Playback mode*1 DVD Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD Audio: T. RPT: Track repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG: T. RPT: Track repeat F. RPT: Folder repeat JPEG: F. RPT: Folder repeat VCD: T. INT: Track intro T.
ENGLISH Dual Zone operations You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source than “USB” through the speakers. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. 1 On the remote controller: 1 2 Adjust the volume through the 2nd AUDIO OUT plug. 3 Operate the DVD/CD player.
MODE REPEAT TRACK Track Information Album Four seasons Artist Robert M. Smith Title Rain Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. • If necessary, press ENT to start playback. 00:14 Track : 6 / 14 Cloudy Fair Fog Hail Indian summer Rain Shower Snow Thunder Typhoon Wind Winter sky Ex.: CD Text 1 Playback mode selection window: appears when OSD is pressed (☞ below).
ENGLISH Operations using the list screen List screen for DVD-VR For discs except DVD, VCD, and CD While Dual Zone is on, these operations are possible on the external monitor using the remote controller. You can use Original Program and Play List screen anytime while playing DVD-VR with its data recorded. • These screens can be displayed on the built-in monitor and the external monitor. While not playing... 1 1 Display the list screen. Display the Original Program/Play List screen.
You can connect a USB mass storage class device such as a USB memory, Digital Audio player*1, portable HDD, etc. to the unit. ~ Connect a USB device. ENGLISH USB operations USB cable from the rear of the unit. • You cannot connect a computer to the USB ( ) terminal of the unit. Ÿ Select “USB”. 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder Hold: Display Folder List DISP: Press if no playback picture appears , but disc information screen (☞ pages 16 to 18) is displayed.
ENGLISH Caution: • • • • • • Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while “Now Reading...” is flashing on the monitor. Do not start the car engine if a USB device is connected. Stop play back before disconnecting a USB device. Make sure all important data has been backed up to avoid losing the data.
Connecting a Bluetooth device for the first time ENGLISH Bluetooth® operations — Cellular phone/audio player Pairing and PIN Code Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The bluetooth devices can be connected without cables and communicate each other. • The serial number is printed on the label placed on the bottom of the unit.
7 ENGLISH Registering using 1 Select “Bluetooth Phone” or “Bluetooth Audio.” Bluetooth Phone FLAT Operate the target Bluetooth device. (While “Open...” is flashing on the screen.) Enter the same PIN code (as entered in the above step) on the device to be connected. NEW DEVICE Now connection is established and you can use the device through the unit. 15: 45 Select “NEW DEVICE” by pressing 5 / ∞. The device remains registered even after you disconnect the device.
Deleting a registered device Perform steps 1 to 3 of “Registering using ” on page 34, then... 1 Select “Bluetooth Phone” or “Bluetooth Audio,” then select a registered device you want to delete. 2 Perform steps 2 and 3 of “Registering using ” on page 34, then... • Select , then . 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit displays the list of the preset devices. 2 Select a device you want to connect. 3 Use (or ) to connect.
ENGLISH Using the Bluetooth cellular phone POWER]ON Adjust the volume*1 Turns Blue when the Bluetooth device is connected. Bluetooth Phone ☞ page 48 FLAT Connected Device Name Connected device name*3 *4 15: 45 Status of the device*2 Signal strength/Battery remainder Press: Display Answers incoming call Hold: Display list ~ Ÿ ! *1 You can adjust the volume level for “Bluetooth Phone” without affecting the volume level for other sources.
Making a call 1 If the cellular phone is compatible with SMS (Short Message Service) and is set to (☞ page 59), the unit rings and “Receiving Message” appears on the monitor to inform you of the arrival of the message. • You cannot edit or send a message through the unit. Display the . ENGLISH When an SMS comes in... P902i Redial Received Calls Phonebook Missed Calls Phone number Annie 2 Select the method to make a call.
ENGLISH How to enter phone number Presetting the phone numbers On the remote: You can preset up to six phone numbers. 1 On the unit: 1 Display the phone number you want to preset by using one of items. Jack Select a number. ENT Store ENT Dial 12312341234 09898765432 09845671234 Move the entry position. Ex.: “Jack” is selected from the phone book Preset Memory list appears. • To delete an unwanted digit, select blank space.
You can use the following buttons on the remote controller for the Bluetooth phone operations. For details, ☞ pages 8 and 9. AV Menu Setup ENT Enter ENT Enter ENGLISH • Preset List can also be accessed through = . AV Menu List List menu icon Using the Bluetooth audio player Reverse/forward skip Turns Blue when the Bluetooth *1 device is connected.
ENGLISH Listening to the CD changer POWER]ON Disc no./Track no./Playing time CD-CH FLAT 01 01 0:02:38 Disc Title Artist Name Current Track Title 15: 45 “No Name” appears for conventional CDs 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder (MP3 only) Hold: Display Disc List It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can play only CDs (CD-DA) and MP3 discs.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random Off AV Menu 4 Setup ENT Repeat Off Track Disc Enter 2 AV Menu ENT Mode ENT Set When one of the playback modes is selected, the corresponding indicator lights up on the monitor. Enter Mode menu icon To cancel, select in step 3 or in step 4.
ENGLISH Listening to the DAB tuner Preset No. TEXT indicator Band POWER]ON DAB TEXT DRC 4¢ ~ Ÿ ! ⁄ 5∞ AF ☞ page 48 FLAT DAB1 Preset1 Bayern Bayern2 ANN News 15: 45 PTY code Service label /Frequency, DAB indicators/Standby Ensemble label* channel Reception indicators Select “DAB.” * Information changes when you press DISP. While tuning in a service with DLS (Dynamic Label Segment), the TEXT indicator lights up. Select the bands. Searching for an ensemble.
On the unit: You can preset six DAB services (primary) for each band. 1 ENGLISH Manual presetting 1 2 2 DAB1 Search for a service you want to preset. 1 2 3 4 5 6 3 DAB1 1 2 3 4 5 6 Store Service Label No Serv. FFH No Serv. HRS HRH ENT ENT ENT 3 Select a preset service. DAB1 ENT 1 2 3 4 • Preset List can also be accessed through = (☞ right). 4 Store Service Label No Serv. FFH Bayern2 HRS HRH 5 6 Store Service Label No Serv.
ENGLISH 4 Activating/deactivating Announcement Standby Reception Announcement Standby Reception allows the unit to switch temporarily to your favorite service (announcement type). Announcement Standby Reception Indicator Activate , then select , (☞ below). ANN 5 Announce Standby Transport News Warning News Weather Event ENT 6 Flashes To deactivate, select in step 4, then press ENT once (☞ right).
POWER]ON Track no./Playing time 4¢: Press: Select track Hold: Reverse/forward search D.PLAYER ☞ page 48 FLAT 01 0:45:38 Album Name Artist Name Track Title 5∞ 5 : Enter player’s menu ∞ : Pause/stop playback • To resume, press again. 15: 45 It is required to connect the interface adapter (KSPD100 for Apple iPod or KS-PD500 for JVC D. player) to the CD changer jack on the rear. Preparation: Make sure or is selected for the external input setting.
ENGLISH Listening to other external components AV-INPUT You can connect an external component to the LINE IN/VIDEO IN plugs. • You can also connect a Navigation System to the VIDEO IN plug so that you can watch the navigation screen (Make sure is selected for ). (☞ page 55) POWER]ON Assigned title (☞ page 49) AV-IN ☞ page 48 FLAT AV-INPUT 15: 45 ~ Ÿ Press if no playback picture appears, but source information (this) screen is displayed. Select “AV-IN.
You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). POWER]ON Assigned title (☞ page 49) EXT-IN ☞ page 48 ENGLISH EXT-INPUT FLAT EXT-INPUT 15: 45 Preparation: Make sure is selected for the external input setting. (☞ page 55) ~ Ÿ Select “EXT-IN.” Turn on the connected component and start playing the source. 47 Book 1.indb 47 EXTERNAL DEVICES 07.2.
ENGLISH Sound equalization POWER]ON Edit +03 60.0 Hz ENT Store Selecting sound mode Storing your own adjustment ~ You can store your adjustment into User1, User2, and User3. AV Menu 1 Setup Ÿ ENT Repeat steps ~ and Ÿ, then in step !... Equalizer Flat Hard Rock R&B Pop Jazz Enter Equalizer menu icon ENT Exit AV Menu Edit +03 Equalizer ENT Enter 60.0 Hz ! Select a sound mode. 2 Adjust. 3 Store.
Press: Change character set Hold: Erase title POWER]ON ENGLISH Assigning titles to the sources Title Entry AV-In Name MY BEST DISP A a 0 You can assign titles to “AV-IN” and “EXT-IN.” Ex.: Assigning title to “AV-IN” ~ Ÿ ! ENT Store Assign a title. 1 Select a character, then move the entering position. Select “AV-IN.” Display the title entry screen. 1 AV Menu Setup ENT Enter ENT Enter 2 AV Menu ⁄ Mode • To change the character set, press DISP. (For available characters, ☞ page 65.
ENGLISH Menu operations POWER]ON Setup Equalizer Sound Disc Surround AV Menu Setup ENT Mode List Enter Bluetooth Dual Zone ! Ex. Changing the setting Sound ~ Fader/Balance Volume Adjust Subwoofer High Pass Filter Crossover Through AV Menu Setup ENT Enter Non-available items will be displayed being shaded. ⁄ Ÿ • For some items, repeat this steps to set the sub-items.
Initial: Underlined Display ENGLISH Setup Menu items Selectable settings, [reference page] Demonstration Off : Cancels. On : Activates the demonstration on the monitor. Wall Paper You can select the background picture of the monitor. Future-Blue, Future-Green, Wave-Blue, Wave-Green, Wave-Pink, Metal-A, Metal-B, Ball-A, Ball-B, Ball-C, Dolphin, Simple-Red, Simple-Purple, Simple-Blue, Simple-Gray Scroll Off : Cancels. Once : Scrolls the disc information once.
ENGLISH Menu items 3 Aspect* Selectable settings, [reference page] You can change the aspect ratio of the picture. Aspect ratio of incoming signal 4:3 16:9 Display Full : For 16:9 original pictures Auto : • For “DISC”: Aspect ratio is automatically selected to match to the incoming signals. • For the other video sources: Aspect ratio is fixed to . Disc Setup 1*5 Clock Regular : For 4:3 original pictures Language*4 Select the indication language shown on the monitor.
Selectable settings, [reference page] Monitor Type 16:9 4:3 Letterbox 4:3 Pan Scan Disc Setup 2 Disc Setup 1*5 OSD Position Position 1 Position 2 Select the monitor type to watch a wide screen picture on the external monitor. 16:9 : Select when the aspect ratio of the external monitor is 16:9. 4:3 Letterbox/4:3 Pan Scan : Select when the aspect ratio of the external monitor is 4:3. Refer to the illustrations on the left to see how the pictures are shown on the monitor.
ENGLISH Menu items Selectable settings, [reference page] Speaker Level You can adjust the output level of the activated speakers (☞ on page 53), monitoring the test tone. Front Lch/Center Ch/Front Rch/Rear Rch/Subwoofer*6/Rear Lch : adjust the output level of each speaker in the range of –10dB to +10dB; Initial 0dB. Select the speaker Disc Setup 2 Adjust the speaker level • Press and hold ENT to turn on and off the test tone.
AV Input You can determine the use of LINE IN and VIDEO IN plugs. Off : Select when no component is connected (“AV-IN” is skipped while selecting the source). Audio&Video : Select when connecting an AV component such as a VCR. Audio : Select when connecting an audio component such as a digital audio player. Camera*10: Select when connecting the rear view camera. Camera Mirror*10: The mirror image of the rear view is displayed on the monitor.
ENGLISH Equalizer Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [48] Sound Menu items Selectable settings, [reference page] Fader/Balance Adjust fader—speaker output balance between the front and rear speakers. • Upmost—front only • Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Menu items Selectable settings, [reference page] Surround Off Select to deactivate the surround function. Surround On Select to activate the surround function. ☞ [24] Auto, Through, Dolby PLII Movie, Dolby PLII Music • When you select Dolby PLII Music, you can adjust and .*17 ENGLISH Disc Surround*16 *16 Selectable only for “DISC” and “USB.” *17 This setting takes effect only when the center speaker is activated.
ENGLISH Bluetooth*19 Menu items Selectable settings, [reference page] Dial Menu Only for the device connected for “Bluetooth Phone.” Select the method to make a call. ☞ [37] Message Only for the device connected for “Bluetooth Phone.”*20 You can read a message from the following message histories. Unread : Messages you have not read. Read : Messages you have read. Unsent : Messages you have not sent. Sent : Messages you have sent. • The number of messages in each history is also shown on the monitor.
Settings Selectable settings, [reference page] Auto Connect*21 When the unit is turned on, the connection is established automatically with... Off : No Bluetoothdevice. Last : The last connected Bluetooth device. Order : The available registered Bluetooth device found at first. Auto Answer*22 Off : The unit does not answer the calls automatically. Answer the calls manually. On : The unit answers the incoming calls automatically. Reject : The unit rejects all incoming calls.
ENGLISH Maintenance How to clean the connector To keep discs clean Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
Playing Recordable/Rewritable discs General • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • This unit can recognize a total 25 characters for file/ folder names. • Some discs or files may not be played back due to their characteristics or recording conditions.
• This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.4 (for MP3). This unit can also show WAV/WMA/AAC Tag. • This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time indication. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format. – WMA files which are not based upon Windows Media® Audio.
• Connection Error : The device is registered but the connection has failed. Use to connect the device again. (☞ page 35) • Error : Try the operation again. If “Error” appears again, check if the device supports the function you have tried. • Device Unfound : No available Bluetooth device is detected by . • Loading : The unit is updating the phone book and/ or SMS. • Please Wait... : The unit is preparing to use the Bluetooth function.
ENGLISH Notice: When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: For D. player users:
Code Language Code Language Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV MG MI MK ML MN MO MR MS MT MY NA NE NO OC OM OR PA PL PS PT QU RM RN RO RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • No sound comes out of the center speaker. General • The monitor is not clear and legible. • The unit does not work at all. • The remote controller does not work. Disc playback FM/AM • “No Signal” appears. Remedies/Causes • Center speaker is not activated. (☞ page 53) Once you have reset the unit, make sure to activate the speaker again.
Remedies/Causes • No playback picture appears on the monitor. Parking brake lead is not connected properly. (☞ Installation/Connection Manual) • Connect the video cord correctly. • Select the correct input on the external monitor. Changing the source by pressing SOURCE will solve this error. • Change the disc. • Record the tracks using a compliant application in the appropriate discs. (☞ page 4) • Add appropriate extension codes to the file names. The track played back is not a playable file format.
Symptoms Remedies/Causes ENGLISH • Bluetooth device does not detect the unit. • Bluetooth • • • • • • CD changer • • • • • • This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. The unit does not detect the Bluetooth • Check the Bluetooth setting of the device. device. • Search from the Bluetooth device.
• “No DAB Signal” appears on the monitor. • “Reset 08” appears on the monitor. • • • • iPod/D. player playback Remedies/Causes • • • • • • • • Move to an area with stronger signals. Connect this unit and the DAB tuner correctly, then reset the unit. (☞ page 3) The DAB tuner does not work at all. Connect this unit and the DAB tuner correctly, then reset the unit. (☞ page 3) “Antenna Power NG” appears on the monitor. Check the cords and connections. The iPod/D.
ENGLISH Specifications Maximum Power Output: Front/Rear: Continuous Power Output Front/Rear: (RMS): FM/AM TUNER AMPLIFIER Load Impedance: Equalizer Control Range: Level: Signal-to-Noise Ratio: Audio Output Level Line-Out Level/Impedance: LINE OUT (FRONT/ Output Impedance: REAR)/CENTER OUT/ SUBWOOFER: Color System: Video Output (composite): Other Terminals: Input: PAL 1 Vp-p/75 Ω LINE IN, VIDEO IN, MIC IN, USB input terminal, Aerial input Output: 2nd AUDIO OUT, VIDEO OUT Others: CD changer, OE REMOTE F
3.5 inch wide liquid crystal display Number of Pixel: 211 200 pixels: 960 (horizontal) × 220 (vertical) Drive Method: TFT (Thin Film Transistor) active matrix format Color System: PAL/NTSC Aspect Ratio: 16:9 (wide) Allowable Storage Temperature: –10°C to +60°C Allowable Operating Temperature: 0°C to +40°C USB Standards: USB 1.1 Data Transfer Rate Full Speed: Maximum 12 Mbytes Low Speed: Maximum 1.5 Mbytes Compatible Device: Mass storage class Compatible File System: FAT 32/16/12 Max.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплуатации? Пожалуйста, перезагрузите Ваше устройство Для получения информации о перезагрузке Вашего устройства обратитесь на соответствующую страницу Маєте ПРОБЛЕМУ з функціонуванням? Повторно налаштуйте систему Див.
KD-AVX33 Installation/Connection Manual LVT1659-006A [EE] Руководство по установке/подключению Керівництво зі встановлення та з’єднання ENGLISH 0207MNMMDWJEIN EN, RU, UK ©2007 Victor Company of Japan, Limited УКРАЇНА РУCCKИЙ This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
INSTALLATION (IN-DASH MOUNTING) УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ) ВСТАНОВЛЕННЯ (МОНТАЖ НА ПРИЛАДОВУ ПАНЕЛЬ) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ ЕЛЕКТРИЧНІ З’ЄДНАННЯ To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation. Для предотвращения коротких замыканий мы рекомендуем Вам отсоединить отрицательный разъем аккумулятора и осуществить все подключения перед установкой устройства.
ENGLISH C РУCCKИЙ УКРАЇНА Connecting the Mic unit / Подключение микрофона / Підключення блоку мікрофона 1 2 Microphone Микрофон Мікрофон J Double-sided adhesive tape Двусторонняя клейкая лента Двостороння липка стрічка or или або Adjust the microphone angle Регулирование угла наклона микрофона Регулювання кута нахилу мікрофона Secure the microphone cord using cord cramps (not supplied) if necessary. При необходимости закрепите кабель микрофона с помощью зажимов для кабеля (не поставляются).
A Connecting to the steering wheel remote controller / Подключение к рулевому пульту дистанционного управления / З’єднання з блоком дистанційного керування, що встановлений на кермі If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR ENTERTAINMENT dealer for details.
D Connecting external components / Подключение внешних устройств / З’єднує зовнішні компоненти Можно подключить внешние устройства последовательно, как показано на схеме ниже. • Все устройства, адаптеры или сигнальные провода необходимо приобрести отдельно. Можна з’єднувати зовнішні компоненти послідовно, як показано на схемі нижче. • Всі компоненти, адаптери або сигнальні шнури необхідно придбати окремо.
ENGLISH DVD/CD RECEIVER KD-AVX33 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS LVT1708-002A [U] Cover_KD-AVX33U.indd 2 07.2.
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open.
How to reset your unit INTRODUCTION Playable disc type ............................ 4 Before operating the unit ................ 5 ENGLISH Contents OPERATIONS Basic operations—Control panel ...... 7 Basic operations— Remote controller (RM-RK251) ...... 8 Listening to the radio ...................... 10 Disc operations ................................ 13 Dual Zone operations ....................... 26 USB operations ................................ 29 Bluetooth® operations— Cellular phone/audio player ..
ENGLISH Playable disc type Disc type Recording format, file type, etc. DVD DVD Video (Region Code: 3)*1 Playable DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R*2/-RW, +R/+RW*3) • DVD Video: UDF bridge • DVD-VR • DivX/MPEG1/MPEG2/JPEG/MP3/ WMA/WAV/AAC: Compliant to ISO 9660 level 1, level 2, Romeo, Joliet • DVD-RAM cannot be played.
Cancel the display demonstration and set the clock. (☞ also pages 46 and 47) • Operations are explained mainly using the buttons on the unit; however, the buttons on the remote controller can work in the same way if they have the same names or marks. ENGLISH Before operating the unit Setup menu icon AV Menu Setup ENT Enter Currently selected menu Indication language: ~ Ÿ ! ⁄ In this manual, English indications are used for purpose of explanation.
ENGLISH (twice) Clock Time Set 12Hours/24Hours OSD Clock 1:00AM ¤ # ‹ fi Return to the menu. Select ], then activate the screen. 12Hours/24Hours 12 Hours 24 Hours Set the clock time. Time Set Hours ^ fl & ‡ 1 : 00AM ENT Exit Time Set Minutes 3 : 45PM ENT $ › % Select either the 12-hour or 24-hour system. Exit * Return to the menu. ENT Exit Return to the menu. Select . Activate the screen.
Select the source. TUNER = DISC (DVD/VCD/CD) = USB =CD-CH, iPod, D.PLAYER, or EXT-IN =Bluetooth Phone =Bluetooth Audio = AV-IN =(back to the beginning) • You cannot select these sources if they are not ready. Change the control panel • Turn on the power. • Display or erase *1. tilt (Tilt1 – Tilt4). • Turn off the power • Activate Voice Dialing [Hold]. [Hold]. • Attenuate the sound (if Adjust the volume. Change the display information. the power is on).
ENGLISH Basic operations — Remote controller (RM-RK251) Main elements and features Installing the battery R03/LR03/AAA If the range or effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Caution: • Do not expose batteries to heat or flame.
On menus: • 5 / ∞: Select items. • 4 / ¢: Goes to previous/next step. w TUNER: Selects the bands. DISC/USB: Stop playback. Bluetooth Phone: Ends the call. Bluetooth Audio: Plays/pauses. On menus: Back. e*2 Adjusts the volume level through the 2nd AUDIO OUT plug. (☞ page 26) r*2 Activates or deactivates Dual Zone. t*1*2 Selects the sound mode. y • DVD Video/DivX 6: Shows the disc menu. • VCD: Resumes PBC playback. (☞ page 21) • DVD-VR: Shows the Play List screen.
ENGLISH Listening to the radio Band POWER]ON Preset No. TUNER FLAT ☞ page 43 FM1 Preset1 ABC Radio 87.5 MHz MO DX 3: 45PM Assigned station name (☞ page 44). If no name is assigned, “No Name” appears. Tuner indicators ~ Ÿ ! Select “TUNER.” Select the bands. Search for a station—Auto Search. • Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it repeatedly. • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
FM station automatic presetting —SSM (Strong-station Sequential Memory) This function works only for FM bands. Once you have activated this function (selected ), it always works when searching for FM stations. 1 This function works only for FM bands. You can preset six stations for each band.
ENGLISH Manual presetting Selecting preset stations Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band On the remote: 1 1 2 or 2 Tune in to a station you want to preset. No Name 92.5 MHz On the unit: 3 FM1 Store 1 2 3 4 5 ENT ENT or Preset List appears.* 1 6 4 87.5 89.9 97.9 105.9 108.0 107.9 FM1 Select a preset number. Store 1 2 3 FM1 Store 1 2 3 4 5 6 5 87.5 89.9 97.9 105.9 108.0 107.9 ENT 4 5 6 ENT 87.5 89.9 97.9 92.5 108.0 107.
The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. ENGLISH Disc operations If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. Insert the disc. Playback starts automatically.
ENGLISH While playing the following discs, press . • Each time you press the button, playback picture and disc information screens appear alternately. Disc type Audio format DVD VIDEO Surround mode DIGITAL T 01 C 02 MULTI 0:45:38 CHAP. RPT 4 ¢ Press: Select chapter Hold: Reverse/forward search*1 5∞ Select title 3: 45PM Playback mode Title no./Chapter no.
DivX ENGLISH DVD FRONT 2CH T 01 C 02 0:45:38 Current Folder Name Current File Name.avi RPT 4 ¢ Press: Select track Hold: Reverse/forward search for DivX/MPEG *2 5∞ Press: Select folder Hold: Display Folder List 3: 45PM For DivX/MPEG: Folder no./Track no./Playing time For JPEG: Folder no./File no. PBC indicator lights up when PBC is in use. ☞ page 43 VCD PBC FLAT 02 0:45:38 3: 45PM 4 ¢ Press: Select track Hold: Reverse/forward search*1 Track no./Playing time *1 Search speed: x2 ] x10.
ENGLISH ☞ page 43 CD FLAT 02 0:45:38 Disc Title Artist Name Current Track Title RPT 3: 45PM 4 ¢ Press: Select track Hold: Reverse/forward search*1 Disc title/Artist Name/Track title (only for CD Text)*3 Audio format (MP3/WMA/WAV/AAC) CD Track no./Playing time ☞ page 43 MP3 FLAT T 01 02 0:45:38 Current Folder Name Current File Name.mp3 RPT 3: 45PM Folder no./Track no.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random AV Menu Off 4 Setup ENT Enter Repeat Off Track Folder 2 AV Menu ENT Mode ENT Enter Mode menu icon Disc type Set When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen. To cancel, select in step 3 or in step 4.
ENGLISH Selecting tracks on the list Prohibiting disc ejection If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback. You can lock a disc in the loading slot. 1 Folder List My Best Cinema Pops My Best2 Favorite Song Cinema2 Off NO EJECT? EMERGENCY EJECT? ENT To cancel the prohibition, repeat the same procedure to select “EJECT OK?”. Folder List appears. • Hold the button to see the next/previous folders. 2 “No Eject” appears.
: : ENGLISH Operations using the remote controller—RM-RK251 Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) (Slow motion*3 during pause. No sound can be heard.) : Press: Select chapter (during playback or pause). Hold: Reverse/forward search.*4 : *1 *1 Erases the misentry of the number.
ENGLISH : : Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) : Press: Select track. Hold: Reverse/forward search.*3 (No sound can be heard.) : Select folder. = = : Select track (within the same folder). (twice) = = : Select folder. : Select aspect ratio. For DivX6: Using menu driven features 1 2 Select an item you want to start playback. : Select audio language. (DivX only) : Select subtitle language.
: : Stop playback. : Start playback. (Slide show: each file is shown for a few seconds.) Shows the current file until you change it if pressed during Slide show. : Select track. : : Select folder. : : : : Start playback/Pause (if pressed during playback). : Reverse/forward search.*4 : Press: Select track. Hold: Reverse/forward search.*6 Select folder. = = : Select track (within the same folder). Select aspect ratio. = = : Select track (within the same folder). (twice) = = : Select folder.
ENGLISH Playing back a bonus group Enjoying surround sounds If a DVD Audio including a “bonus group” is detected, the BONUS indicator lights up on the disc information screen. You can enjoy multi-channel surround playback through the front, center, surround speakers. • After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker (☞ page 49). • All surround mode can also be used for “USB.” To play a bonus group...
4 ENT Set • You cannot change the settings using the remote controller. • Auto: When multi-channel digital signals come in, “MULTI” surround is activated. When 2-channel or 2.1-channel signals come in, “4CH STEREO” is activated. • Through: All incoming channel signals are sent to the corresponding speakers. • Dolby PLII Movie: Activates Dolby Pro Logic II Movie. • Dolby PLII Music: Activates Dolby Pro Logic II Music. You can adjust and settings.
ENGLISH Operations using the on-screen bar (DVD/VCD/DivX/MPEG1/MPEG2/ JPEG) These operations are possible on the monitor using the remote controller. 1 Display the on-screen bar. (☞ page 25) 2 Select an item. 3 Make a selection. If a pop-up menu appears... • For entering time/numbers... : Move the entry position : Select a number To remove the on-screen bar 24 KD-AVX33U.indb 24 07.2.
Information Operation DVD -V TIME C. RPT TITLE CHAP ENGLISH On-screen bar T02-C03 TOTAL 1:25:58 RPT Above example is of DVD Video. Items shown on the bar vary due to the disc type. 1 Disc type 2 • DVD: Audio signal format • VCD: PBC 3 Playback mode*1 DVD Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD Audio: T. RPT: Track repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG: T. RPT: Track repeat F. RPT: Folder repeat JPEG: F. RPT: Folder repeat VCD: T. INT: Track intro T.
ENGLISH Dual Zone operations You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source than “USB” through the speakers. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. 1 On the remote controller: 1 2 Adjust the volume through the 2nd AUDIO OUT plug. 3 Operate the DVD/CD player.
MODE REPEAT TRACK Track Information Album Four seasons Artist Robert M. Smith Title Rain Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. • If necessary, press ENT to start playback. 00:14 Track : 6 / 14 Cloudy Fair Fog Hail Indian summer Rain Shower Snow Thunder Typhoon Wind Winter sky Ex.: CD Text 1 Playback mode selection window: appears when OSD is pressed (☞ below).
ENGLISH Operations using the list screen List screen for DVD-VR You can use Original Program and Play List screen anytime while playing DVD-VR with its data recorded. For discs except DVD, VCD, and CD While Dual Zone is on, these operations are possible on the external monitor using the remote controller. 1 While not playing... 1 Display the list screen.
You can connect a USB mass storage class device such as a USB memory, Digital Audio player*1, portable HDD, etc. to the unit. ~ Connect a USB device. ENGLISH USB operations USB cable from the rear of the unit. • You cannot connect a computer to the USB ( ) terminal of the unit. Ÿ Select “USB”. 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder Hold: Display Folder List DISP: Press if no playback picture appears , but disc information screen (☞ pages 14 to 16) is displayed.
ENGLISH Caution: • • • • • • Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while “Now Reading...” is flashing on the monitor. Do not start the car engine if a USB device is connected. Stop playback before disconnecting a USB device. Make sure all important data has been backed up to avoid losing the data.
Connecting a Bluetooth device for the first time ENGLISH Bluetooth® operations — Cellular phone/audio player Pairing and PIN Code Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The bluetooth devices can be connected without cables and communicate each other. • The serial number is printed on the label placed on the bottom of the unit.
7 ENGLISH Registering using 1 Select “Bluetooth Phone” or “Bluetooth Audio.” Bluetooth Phone FLAT Operate the target Bluetooth device. (While “Open...” is flashing on the screen.) Enter the same PIN code (as entered in the above step) on the device to be connected. NEW DEVICE Now connection is established and you can use the device through the unit. 3: 45PM Select “NEW DEVICE” by pressing 5 / ∞. The device remains registered even after you disconnect the device.
Deleting a registered device Perform steps 1 to 3 of “Registering using ” on page 32, then... 1 Select “Bluetooth Phone” or “Bluetooth Audio,” then select a registered device you want to delete. 2 Perform steps 2 and 3 of “Registering using ” on page 32, then... • Select , then . 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit displays the list of the preset devices. 2 Select a device you want to connect. 3 Use (or ) to connect.
ENGLISH Using the Bluetooth cellular phone Adjust the volume*1 POWER]ON Turns Blue when the Bluetooth device is connected. Bluetooth Phone FLAT Connected Device Name ☞ page 43 Connected device name *3 *4 3: 45PM Press: Display Answer incoming call Hold: Display list ~ Ÿ ! Status of the device*2 Signal strength/Battery remainder *1 You can adjust the volume level for “Bluetooth Phone” without affecting the volume level for other sources.
Making a call 1 If the cellular phone is compatible with SMS (Short Message Service) and is set to (☞ page 54), the unit rings and “Receiving Message” appears on the monitor to inform you of the arrival of the message. • You cannot edit or send a message through the unit. Display the . ENGLISH When an SMS comes in... P902i Redial Received Calls Phonebook Missed Calls Phone number Annie 2 Select the method to make a call.
ENGLISH How to enter phone number Presetting the phone numbers On the remote: You can preset up to six phone numbers. 1 On the unit: Display the phone number you want to preset by using one of items. Jack 1 Select a number. ENT Store ENT Dial 12312341234 09898765432 09845671234 Move the entry position. Ex.: “Jack” is selected from the phone book Preset Memory list appears. • To delete an unwanted digit, select blank space.
You can use the following buttons on the remote controller for the Bluetooth phone operations. For details, ☞ pages 8 and 9. AV Menu Setup ENT Enter ENT Enter ENGLISH • Preset List can also be accessed through = . AV Menu List List menu icon Using the Bluetooth audio player Reverse/forward skip POWER]ON Turns Blue when the Bluetooth device is connected.
ENGLISH Listening to the CD changer POWER]ON Disc no./Track no./Playing time CD-CH FLAT 01 01 0:02:38 Disc Title Artist Name Current Track Title 3: 45PM “No Name” appears for conventional CDs 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder (MP3 only) Hold: Display Disc List It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can play only CDs (CD-DA) and MP3 discs.
3 1 ENGLISH Selecting playback modes You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat Mode All Off Intro Repeat Random Off AV Menu 4 Setup ENT Repeat Off Track Disc Enter 2 AV Menu ENT Mode ENT Set When one of the playback modes is selected, the corresponding indicator lights up on the monitor. Enter Mode menu icon To cancel, select in step 3 or in step 4.
ENGLISH Listening to the iPod/D. player POWER]ON Track no./Playing time 4 ¢: Press: Select track Hold: Reverse/forward search D.PLAYER ☞ page 43 FLAT 01 0:45:38 Album Name Artist Name Track Title 5∞ 5 : Enter player’s menu ∞ : Pause/stop playback • To resume, press again. 3: 45PM It is required to connect the interface adapter (KSPD100 for Apple iPod or KS-PD500 for JVC D. player) to the CD changer jack on the rear. Preparation: Make sure or
AV-INPUT You can connect an external component to the LINE IN/VIDEO IN plugs. • You can also connect a Navigation System to the VIDEO IN plug so that you can watch the navigation screen (Make sure is selected for ). (☞ page 50) POWER]ON Assigned title (☞ page 44) AV-IN ENGLISH Listening to other external components ☞ page 43 FLAT AV-INPUT 3: 45PM ~ Ÿ Press if no playback picture appears, but source information (this) screen is displayed. Select “AV-IN.
ENGLISH EXT-INPUT You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). POWER]ON Assigned title (☞ page 44) EXT-IN ☞ page 43 FLAT EXT-INPUT 3: 45PM Preparation: Make sure is selected for the external input setting. (☞ page 50) ~ Ÿ Select “EXT-IN.” Turn on the connected component and start playing the source. 42 KD-AVX33U.indb 42 07.2.
ENGLISH Sound equalization POWER]ON Edit +03 60.0 Hz ENT Store Selecting sound mode Storing your own adjustment ~ You can store your adjustment into User1, User2, and User3. AV Menu 1 Setup Ÿ ENT Repeat steps ~ and Ÿ, then in step !... Equalizer Flat Hard Rock R&B Pop Jazz Enter Equalizer menu icon ENT Exit AV Menu Edit +03 Equalizer ENT Enter 60.0 Hz ! Select a sound mode. 2 Adjust. 3 Store.
ENGLISH Assigning titles to the sources Press: Change character set Hold: Erase title POWER]ON Title Entry Station Name ABC Radio DISP A a 0 Á á ENT Store You can assign titles as follows. FM/AM stations Up to 16 characters—up to 30 stations AV-IN Up to 16 characters EXT-IN 3 • If you try to assign a title to a 31st station, “Name Full” flashes on the monitor. Delete unwanted titles before assignment. Ex.
POWER]ON Setup Equalizer Sound Disc Surround ENGLISH Menu operations AV Menu Setup ENT Mode List Enter Bluetooth Dual Zone ! Ex. Changing the setting Sound ~ Fader/Balance Volume Adjust Subwoofer High Pass Filter Crossover Through AV Menu Setup ENT Enter Non-available items will be displayed being shaded. ⁄ Ÿ • For some items, repeat this steps to set the sub-items.
Initial: Underlined Display ENGLISH Setup Menu items Selectable settings, [reference page] Demonstration Off : Cancels. On : Activates the demonstration on the monitor. Wall Paper You can select the background picture of the monitor. Future-Blue, Future-Green, Wave-Blue, Wave-Green, Wave-Pink, Metal-A, Metal-B, Ball-A, Ball-B, Ball-C, Dolphin, Simple-Red, Simple-Purple, Simple-Blue, Simple-Gray Scroll Off : Cancels. Once : Scrolls the disc information once.
3 Aspect* Selectable settings, [reference page] You can change the aspect ratio of the picture. Aspect ratio of incoming signal 4:3 ENGLISH Menu items 16:9 Full : For 16:9 original pictures Auto : Display • For “DISC”: Aspect ratio is automatically selected to match to the incoming signals. • For the other video sources: Aspect ratio is fixed to . Clock Regular : For 4:3 original pictures NTSC/PAL This setting is valid only to the external monitor connected.
ENGLISH Menu items Selectable settings, [reference page] Menu Language Select the initial disc menu language; Initial English (☞ also page 61). Audio Language Select the initial audio language; Initial English (☞ also page 61). Subtitle Select the initial subtitle language or erase the subtitle (); Initial English (☞ also page 61). OSD Language Select the on-screen language used for the external monitor connected to the VIDEO OUT plug; Initial English.
Selectable settings, [reference page] D. (Dynamic) Range Compres. (Compression)*5 You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto : Select to apply the effect to multi-channel encoded software. On : Select to always use this function. Speaker Size*5 You can adjust the speaker size setting.
IF Band Width Auto : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Wide : Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. AV Input You can determine the use of LINE IN and VIDEO IN plugs. Off : Select when no component is connected (“AV-IN” is skipped while selecting the source). Audio&Video : Select when connecting an AV component such as a VCR.
Equalizer ENGLISH Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [43] Sound Menu items Selectable settings, [reference page] Fader/Balance Adjust fader—speaker output balance between the front and rear speakers. • Upmost—front only • Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
ENGLISH Disc Surround*14 Menu items Selectable settings, [reference page] Surround Off Select to deactivate the surround function. Surround On Select to activate the surround function. ☞ [22, 23] Auto, Through, Dolby PLII Movie, Dolby PLII Music • When you select Dolby PLII Music, you can adjust and .*15 *14 Selectable only for “DISC” and “USB.” *15 This setting takes effect only when the center speaker is activated.
ENGLISH Bluetooth*17 Menu items Selectable settings, [reference page] Dial Menu Only for the device connected for “Bluetooth Phone.” Select the method to make a call. ☞ [35] Message Only for the device connected for “Bluetooth Phone.”*18 You can read a message from the following message histories. Unread : Messages you have not read. Read : Messages you have read. Unsent : Messages you have not sent. Sent : Messages you have sent. • The number of messages in each history is also shown on the monitor.
Settings ENGLISH Menu items Selectable settings, [reference page] Auto Connect*19 When the unit is turned on, the connection is established automatically with... Off : No Bluetooth device. Last : The last connected Bluetooth device. Order : The available registered Bluetooth device found at first. Auto Answer*20 Off : The unit does not answer the calls automatically. Answer the calls manually. On : The unit answers the incoming calls automatically. Reject : The unit rejects all incoming calls.
How to clean the connector To keep discs clean Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.
ENGLISH More about this unit Changing the source General • If you change the source, playback also stops without ejecting the disc. Next time you select “DISC” for the playback source, disc play starts from where it stopped previously. Turning on the power • By pressing SRC (source) on the unit, you can also turn on the power. If the source is ready, playback starts.
• This unit can play back files with the extension code <.mp3>, <.wma>, <.wav>, or <.m4a> (regardless of the letter case—upper/lower). • This unit can play back the files meeting the conditions below: – Bit rate: MP3/WMA: 32 kbps — 320 kbps AAC: 16 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG2) 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA) 44.1 kHz (for WAV) 48 kHz, 44.1 kHz (for AAC) • This unit can show ID3 Tag Version 1.0/1.1/2.2/2.3/2.
ENGLISH Enjoying surround sounds USB • If is selected, “MULTI” surround playback automatically starts for multi-channel encoded discs regardless of the setting. • You cannot activate surround for MPEG multi-channel DVD Video, DivX 2-channel and MPEG 2-channel sources. If is selected, stereo sounds are emitted only through the front speakers. “FRONT 2CH” appears on the source information screen.
iPod/D. player operations • When you turn on this unit, the iPod or D. player is charged through the adapter connected to this unit. • The text information may not be displayed correctly. This unit can display up to 40 characters. • While driving, do not perform complicated operation such as dialling the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place.
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, inc. and are used under license.
Code Language Code Language Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV MG MI MK ML MN MO MR MS MT MY NA NE NO OC OM OR PA PL PS PT QU RM RN RO RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara
ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • No sound comes out of the center speaker. General • The monitor is not clear and legible. • The unit does not work at all. • The remote controller does not work. Disc playback FM/AM • “No Signal” appears. Remedies/Causes • Center speaker is not activated. (☞ page 49) Once you have reset the unit, make sure to activate the speaker again.
File playback Disc playback • No playback picture appears on the monitor. • No picture appears on the external monitor. • “Eject Error” or “Loading Error” appears on the monitor. • Disc cannot be played back. • Noise is generated. • Tracks are not played back as you have intended them to play. • Elapsed playing time is not correct. • “Not Support” appears on the monitor and track is skipped. • Noise is generated. USB playback • Tracks cannot play back as you have intended them to play.
Symptoms Remedies/Causes ENGLISH • Bluetooth device does not detect the unit. • Bluetooth • • • • • • CD changer • • • • • • This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. The unit does not detect the Bluetooth • Check the Bluetooth setting of the device. device. • Search from the Bluetooth device.
• The iPod/D. player does not turn on or does not work. iPod/D. player playback • The sound is distorted. • “Disconnect” appears on the monitor. • For iPod: Playback stops. • No sound can be heard. • “Error 01” appears on the monitor when connecting a D. player. • “No Files” or “No Track” appears on the monitor. • “Reset 01” – “Reset 07” appears on the monitor. • “Reset 08” appears on the monitor. • The iPod’s or D. player’s controls do not work after disconnecting from this unit.
ENGLISH Specifications Maximum Power Output: Front/Rear: Continuous Power Output Front/Rear: (RMS): DVD/CD FM/AM TUNER AMPLIFIER Signal-to-Noise Ratio: Load Impedance: Equalizer Control Range: Frequencies: Level: Audio Output Level Line-Out Level/Impedance: LINE OUT (FRONT/ Output Impedance: REAR)/CENTER OUT/ SUBWOOFER: Color System: Video Output (composite): Other Terminals: Input: 50 W per channel 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
3.5 inch wide liquid crystal display Number of Pixel: 211 200 pixels: 960 (horizontal) × 220 (vertical) Drive Method: TFT (Thin Film Transistor) active matrix format Color System: NTSC/PAL Aspect Ratio: 16:9 (wide) Allowable Storage Temperature: –10°C to +60°C Allowable Operating Temperature: 0°C to +40°C USB Standards: USB 1.1 Data Transfer Rate: Full Speed: Maximum 12 Mbytes Low Speed: Maximum 1.5 Mbytes Compatible Device: Mass storage class Compatible File System: FAT 32/16/12 Max.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, CT, TH © 2007 Victor Company of Japan, Limited Rear_KD-AVX33U.indd 2 0207MNMMDWJEIN 07.2.
KD-AVX33 LVT1708-005A [U] Installation/Connection Manual ϰ༬ ો˿̱ 0207MNMMDWJEIN °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß EN, CT, TH ©2007 Victor Company of Japan, Limited ˁ̂ ENGLISH ‰∑¬ This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
INSTALLATION (IN-DASH MOUNTING) ϰ༬ (༬éׇ֤ϛᄮ)˗ؼڸ °“√µ‘¥µ—Èß (°“√ª√–°Õ∫·ºßÀπÈ“ª—∑¡Ï‡¢È“) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician. • Make sure not to block the fan on the rear panel to maintain proper ventilation when installed.
ELECTRICAL CONNECTIONS ྑཕો To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation.
ˁ̂ ENGLISH A Connecting the parking brake lead / ોг˿۬Կዘሉ / µËÕ Connect the parking brake lead to the parking brake system built in the car.
A Connecting the external amplifiers / ોг͚௱̸ୋ؟ʩወ / °“√µËÕ‡æ‘Ë¡‡µ‘¡‡¢È“°—∫Õÿª°√≥ÏÕ◊Ëπ You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • For amplifier only: – After you have connected the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the connected center speaker, see page 49 of the INSTRUCTIONS.
C Connecting external components / ો͚௱༬ / °“√‡™◊ËÕ¡µËÕ Ë«πª√–°Õ∫¿“¬πÕ° You can connect external components in series as shown in the diagram below. • All the components, adapters or signal cords need to be purchased separately. ̣̈́Ϩʓ࿌Εрᑷ͙௰༫é • Љ༫èቱྐ༙ۑងᄔ࠱˜Ѥᒯකé • CAUTION: ʯ˼: Before connecting the external components, make sure that the unit is turned off.
DVD/CD RECEIVER KD-AVX33 For canceling the display demonstration, see page 5. For installation and connections, refer to the separate manual. INSTRUCTIONS LVT1708-001A [A] Cover_KD-AVX33A.indd 2 07.2.
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.
How to reset your unit Contents INTRODUCTION Playable disc type ............................ 4 Before operating the unit ................ 5 OPERATIONS Basic operations—Control panel ...... 7 Basic operations— Remote controller (RM-RK251) ...... 8 Listening to the radio ...................... 10 Disc operations ................................ 13 Dual Zone operations ....................... 26 USB operations ................................ 29 Bluetooth® operations— Cellular phone/audio player ..........
Playable disc type Disc type Recording format, file type, etc. DVD DVD Video (Region Code: 4)*1 Playable DVD Audio DVD-ROM DVD Recordable/Rewritable (DVD-R*2/-RW, +R/+RW*3) • DVD Video: UDF bridge • DVD-VR • DivX/MPEG1/MPEG2/JPEG/MP3/ WMA/WAV/AAC: Compliant to ISO 9660 level 1, level 2, Romeo, Joliet • DVD-RAM cannot be played.
Before operating the unit Cancel the display demonstration and set the clock. (☞ also pages 46 and 47) • Operations are explained mainly using the buttons on the unit; however, the buttons on the remote controller can work in the same way if they have the same names or marks. Setup menu icon AV Menu Setup ENT Enter Currently selected menu Indication language: ~ Ÿ ! ⁄ In this manual, English indications are used for purpose of explanation. You can select the indication language on the monitor.
(twice) Clock Time Set 12Hours/24Hours OSD Clock 1:00AM ¤ # ‹ fi Return to the menu. Select ], then activate the screen. 12Hours/24Hours 12 Hours 24 Hours Set the clock time. Time Set Hours ^ fl & ‡ 1 : 00AM ENT Exit Time Set Minutes 3 : 45PM ENT $ › % Select either the 12-hour or 24-hour system. Exit * Return to the menu. ENT Exit Return to the menu. Select . Activate the screen. Select the setting.
Basic operations — Control panel Select the source. TUNER = DISC (DVD/VCD/CD) = USB =CD-CH, iPod, D.PLAYER, or EXT-IN =Bluetooth Phone =Bluetooth Audio = AV-IN =(back to the beginning) • You cannot select these sources if they are not ready. Change the control panel • Turn on the power. • Display or erase *1. tilt (Tilt1 – Tilt4). • Turn off the power • Activate Voice Dialing [Hold]. [Hold]. • Attenuate the sound (if Adjust the volume. Change the display information. the power is on).
Basic operations — Remote controller (RM-RK251) Main elements and features Installing the battery R03/LR03/AAA If the range or effectiveness of the remote controller decreases, replace both batteries. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Caution: • Do not expose batteries to heat or flame.
6 On menus: • 5 / ∞: Select items. • 4 / ¢: Goes to previous/next step. w TUNER: Selects the bands. DISC/USB: Stop playback. Bluetooth Phone: Ends the call. Bluetooth Audio: Plays/pauses. On menus: Back. e*2 Adjusts the volume level through the 2nd AUDIO OUT plug. (☞ page 26) r*2 Activates or deactivates Dual Zone. t*1*2 Selects the sound mode. y • DVD Video/DivX 6: Shows the disc menu. • VCD: Resumes PBC playback. (☞ page 21) • DVD-VR: Shows the Play List screen.
Listening to the radio Band POWER]ON Preset No. TUNER FLAT ☞ page 43 FM1 Preset1 ABC Radio 87.5 MHz MO DX 3: 45PM Assigned station name (☞ page 44). If no name is assigned, “No Name” appears. Tuner indicators ~ Ÿ ! Select “TUNER.” Select the bands. Search for a station—Auto Search. • Manual Search: Hold either 4 or ¢ until “Manual Search” appears on the display, then press it repeatedly. • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
Tuning in to stations with sufficient signal strength FM station automatic presetting —SSM (Strong-station Sequential Memory) This function works only for FM bands. Once you have activated this function (selected ), it always works when searching for FM stations. 1 This function works only for FM bands. You can preset six stations for each band.
Manual presetting Selecting preset stations Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band On the remote: 1 1 2 or 2 Tune in to a station you want to preset. No Name 92.5 MHz On the unit: 3 FM1 Store 1 2 3 4 5 ENT ENT or Preset List appears.* 1 6 4 87.5 89.9 97.9 105.9 108.0 107.9 FM1 Select a preset number. Store 1 2 3 FM1 Store 1 2 3 4 5 6 5 87.5 89.9 97.9 105.9 108.0 107.9 ENT 4 5 6 ENT 87.5 89.9 97.9 92.5 108.0 107.
Disc operations The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. If “ ” appears on the monitor, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. Insert the disc. Playback starts automatically.
While playing the following discs, press . • Each time you press the button, playback picture and disc information screens appear alternately. Disc type Audio format DVD VIDEO Surround mode DIGITAL T 01 C 02 MULTI 0:45:38 CHAP. RPT 4 ¢ Press: Select chapter Hold: Reverse/forward search*1 5∞ Select title 3: 45PM Playback mode Title no./Chapter no.
DVD DivX FRONT 2CH T 01 C 02 0:45:38 Current Folder Name Current File Name.avi RPT 4 ¢ Press: Select track Hold: Reverse/forward search for DivX/MPEG *2 5∞ Press: Select folder Hold: Display Folder List 3: 45PM For DivX/MPEG: Folder no./Track no./Playing time For JPEG: Folder no./File no. PBC indicator lights up when PBC is in use. ☞ page 43 VCD PBC FLAT 02 0:45:38 3: 45PM 4 ¢ Press: Select track Hold: Reverse/forward search*1 Track no./Playing time *1 Search speed: x2 ] x10.
☞ page 43 CD FLAT 02 0:45:38 Disc Title Artist Name Current Track Title RPT 3: 45PM 4 ¢ Press: Select track Hold: Reverse/forward search*1 Disc title/Artist Name/Track title (only for CD Text)*3 Audio format (MP3/WMA/WAV/AAC) CD Track no./Playing time ☞ page 43 MP3 FLAT T 01 02 0:45:38 Current Folder Name Current File Name.mp3 RPT 3: 45PM Folder no./Track no.
Selecting playback modes 3 You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat 1 Mode All Off Intro Repeat Random AV Menu Off 4 Setup ENT Enter Repeat Off Track Folder 2 AV Menu ENT Mode ENT Enter Mode menu icon Disc type Set When one of the playback modes is selected, the corresponding indicator lights up on the disc information screen. To cancel, select in step 3 or in step 4.
Selecting tracks on the list Prohibiting disc ejection If a disc includes folders, you can display the Folder/ Track (File) Lists, then start playback. You can lock a disc in the loading slot. 1 Folder List My Best Cinema Pops My Best2 Favorite Song Cinema2 Off NO EJECT? EMERGENCY EJECT? ENT To cancel the prohibition, repeat the same procedure to select “EJECT OK?”. Folder List appears. • Hold the button to see the next/previous folders. 2 “No Eject” appears.
Operations using the remote controller—RM-RK251 : : Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) (Slow motion*3 during pause. No sound can be heard.) : Press: Select chapter (during playback or pause). Hold: Reverse/forward search.*4 : *1 *1 Erases the misentry of the number.
: Stop playback. Start playback/Pause (if pressed during playback). : Reverse/forward search.*2 (No sound can be heard.) : Press: Select track. Hold: Reverse/forward search.*3 (No sound can be heard.) : Select folder. = = : Select track (within the same folder). (twice) = = : For DivX6: Using menu driven Select folder. features : Select aspect ratio. : : Select audio language. (DivX only) : Select subtitle language. (DivX only) 1 2 Select an item you want to start playback. 3 *1 While playing...
: : : Start playback. (Slide show: each file is shown for a few seconds.) Shows the current file until you change it if pressed during Slide show. : Select track. : : Select folder. : : : : : : . To cancel PBC playback 1 2 Start the desired track. = = • To resume PBC, press / . *1 *2 *3 *4 *5 Erases the misentry of the number.
Playing back a bonus group Enjoying surround sounds If a DVD Audio including a “bonus group” is detected, the BONUS indicator lights up on the disc information screen. You can enjoy multi-channel surround playback through the front, center, surround speakers. • After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker (☞ page 49). • All surround mode can also be used for “USB.” To play a bonus group... 1 Select the bonus group.
4 On the remote controller: Surround On Auto Through Dolby PLII Movie Dolby PLII Music ENT Set • You cannot change the settings using the remote controller. • Auto: When multi-channel digital signals come in, “MULTI” surround is activated. When 2-channel or 2.1-channel signals come in, “4CH STEREO” is activated. • Through: All incoming channel signals are sent to the corresponding speakers. • Dolby PLII Movie: Activates Dolby Pro Logic II Movie.
Operations using the on-screen bar (DVD/VCD/DivX/MPEG1/MPEG2/ JPEG) These operations are possible on the monitor using the remote controller. 1 Display the on-screen bar. (☞ page 25) 2 Select an item. 3 Make a selection. If a pop-up menu appears... • For entering time/numbers... : Move the entry position : Select a number To remove the on-screen bar 24 KD-AVX33A.indb 24 07.2.
On-screen bar Information Operation DVD -V TIME C. RPT TITLE CHAP T02-C03 TOTAL 1:25:58 RPT Above example is of DVD Video. Items shown on the bar vary due to the disc type. 1 Disc type 2 • DVD: Audio signal format • VCD: PBC 3 Playback mode*1 DVD Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD Audio: T. RPT: Track repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG: T. RPT: Track repeat F. RPT: Folder repeat JPEG: F. RPT: Folder repeat VCD: T. INT: Track intro T.
Dual Zone operations You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source than “USB” through the speakers. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. 1 On the remote controller: 1 2 Adjust the volume through the 2nd AUDIO OUT plug. 3 Operate the DVD/CD player.
1 Current folder (highlighted bar) 2 Current folder number/total folder number 3 Folder list * If tag data includes “Jacket Picture” (baseline JPEG), it will be displayed. If you press OSD, the playback mode selection window appears.
Operations using the list screen List screen for DVD-VR You can use Original Program and Play List screen anytime while playing DVD-VR with its data recorded. For discs except DVD, VCD, and CD While Dual Zone is on, these operations are possible on the external monitor using the remote controller. 1 While not playing... 1 Display the list screen.
USB operations You can connect a USB mass storage class device such as a USB memory, Digital Audio player*1, portable HDD, etc. to the unit. ~ Connect a USB device. USB cable from the rear of the unit. • You cannot connect a computer to the USB ( ) terminal of the unit. Ÿ Select “USB”. 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder Hold: Display Folder List DISP: Press if no playback picture appears , but disc information screen (☞ pages 14 to 16) is displayed.
Caution: • • • • • • Avoid using the USB device if it might hinder your safety driving. Do not pull out and attach the USB device repeatedly while “Now Reading...” is flashing on the monitor. Do not start the car engine if a USB device is connected. Stop playback before disconnecting a USB device. Make sure all important data has been backed up to avoid losing the data. Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.
Bluetooth® operations — Cellular phone/audio player Connecting a Bluetooth device for the first time Pairing and PIN Code Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The bluetooth devices can be connected without cables and communicate each other. • The serial number is printed on the label placed on the bottom of the unit.
7 Registering using 1 Select “Bluetooth Phone” or “Bluetooth Audio.” Bluetooth Phone FLAT Operate the target Bluetooth device. (While “Open...” is flashing on the screen.) Enter the same PIN code (as entered in the above step) on the device to be connected. NEW DEVICE Now connection is established and you can use the device through the unit. 3: 45PM Select “NEW DEVICE” by pressing 5 / ∞. The device remains registered even after you disconnect the device.
Connecting a special device Deleting a registered device Perform steps 1 to 3 of “Registering using ” on page 32, then... 1 Select “Bluetooth Phone” or “Bluetooth Audio,” then select a registered device you want to delete. 2 Perform steps 2 and 3 of “Registering using ” on page 32, then... • Select , then . 1 NEW DEVICE Dial Menu Message Open Search Special Device The unit displays the list of the preset devices. 2 Select a device you want to connect.
Using the Bluetooth cellular phone Adjust the volume*1 POWER]ON Turns Blue when the Bluetooth device is connected. Bluetooth Phone FLAT Connected Device Name ☞ page 43 Connected device name *3 *4 3: 45PM Press: Display Answer incoming call Hold: Display list ~ Ÿ ! Status of the device*2 Signal strength/Battery remainder *1 You can adjust the volume level for “Bluetooth Phone” without affecting the volume level for other sources.
Making a call When an SMS comes in... 1 If the cellular phone is compatible with SMS (Short Message Service) and is set to (☞ page 54), the unit rings and “Receiving Message” appears on the monitor to inform you of the arrival of the message. • You cannot edit or send a message through the unit. Display the . P902i Redial Received Calls Phonebook Missed Calls Phone number Annie 2 Select the method to make a call.
How to enter phone number Presetting the phone numbers On the remote: You can preset up to six phone numbers. 1 On the unit: Display the phone number you want to preset by using one of items. Jack 1 Select a number. ENT Store ENT Dial 12312341234 09898765432 09845671234 Move the entry position. Ex.: “Jack” is selected from the phone book Preset Memory list appears. • To delete an unwanted digit, select blank space.
• Preset List can also be accessed through = . You can use the following buttons on the remote controller for the Bluetooth phone operations. For details, ☞ pages 8 and 9. AV Menu Setup ENT Enter ENT Enter AV Menu List List menu icon Using the Bluetooth audio player Reverse/forward skip POWER]ON Turns Blue when the Bluetooth device is connected.
Listening to the CD changer POWER]ON Disc no./Track no./Playing time CD-CH FLAT 01 01 0:02:38 Disc Title Artist Name Current Track Title 3: 45PM “No Name” appears for conventional CDs 4 ¢ Press: Select track Hold: Reverse/forward search 5∞ Press: Select folder (MP3 only) Hold: Display Disc List It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can play only CDs (CD-DA) and MP3 discs.
Selecting playback modes 3 You can use only one of the following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat 1 Mode All Off Intro Repeat Random Off AV Menu 4 Setup ENT Repeat Off Track Disc Enter 2 AV Menu ENT Mode ENT Set When one of the playback modes is selected, the corresponding indicator lights up on the monitor. Enter Mode menu icon To cancel, select in step 3 or in step 4.
Listening to the iPod/D. player POWER]ON Track no./Playing time 4 ¢: Press: Select track Hold: Reverse/forward search D.PLAYER ☞ page 43 FLAT 01 0:45:38 Album Name Artist Name Track Title 5∞ 5 : Enter player’s menu ∞ : Pause/stop playback • To resume, press again. 3: 45PM It is required to connect the interface adapter (KSPD100 for Apple iPod or KS-PD500 for JVC D. player) to the CD changer jack on the rear. Preparation: Make sure or is selected for the external input setting.
Listening to other external components AV-INPUT You can connect an external component to the LINE IN/VIDEO IN plugs. • You can also connect a Navigation System to the VIDEO IN plug so that you can watch the navigation screen (Make sure is selected for ). (☞ page 50) POWER]ON Assigned title (☞ page 44) AV-IN ☞ page 43 FLAT AV-INPUT 3: 45PM ~ Ÿ Press if no playback picture appears, but source information (this) screen is displayed. Select “AV-IN.
EXT-INPUT You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). POWER]ON Assigned title (☞ page 44) EXT-IN ☞ page 43 FLAT EXT-INPUT 3: 45PM Preparation: Make sure is selected for the external input setting. (☞ page 50) ~ Ÿ Select “EXT-IN.” Turn on the connected component and start playing the source. 42 KD-AVX33A.indb 42 07.2.
Sound equalization POWER]ON Edit +03 60.0 Hz ENT Store Selecting sound mode Storing your own adjustment ~ You can store your adjustment into User1, User2, and User3. AV Menu 1 Setup Ÿ ENT Repeat steps ~ and Ÿ, then in step !... Equalizer Flat Hard Rock R&B Pop Jazz Enter Equalizer menu icon ENT Exit AV Menu Edit +03 Equalizer ENT Enter 60.0 Hz ! Select a sound mode. 2 Adjust. 3 Store.
Assigning titles to the sources Press: Change character set Hold: Erase title POWER]ON Title Entry Station Name ABC Radio DISP A a 0 Á á ENT Store You can assign titles as follows. FM/AM stations Up to 16 characters—up to 30 stations AV-IN Up to 16 characters EXT-IN 3 • If you try to assign a title to a 31st station, “Name Full” flashes on the monitor. Delete unwanted titles before assignment. Ex.
Menu operations POWER]ON Setup Equalizer Sound Disc Surround AV Menu Setup ENT Mode List Enter Bluetooth Dual Zone ! Ex. Changing the setting Sound ~ Fader/Balance Volume Adjust Subwoofer High Pass Filter Crossover Through AV Menu Setup ENT Enter Non-available items will be displayed being shaded. ⁄ Ÿ • For some items, repeat this steps to set the sub-items.
Initial: Underlined Display Setup Menu items Selectable settings, [reference page] Demonstration Off : Cancels. On : Activates the demonstration on the monitor. Wall Paper You can select the background picture of the monitor. Future-Blue, Future-Green, Wave-Blue, Wave-Green, Wave-Pink, Metal-A, Metal-B, Ball-A, Ball-B, Ball-C, Dolphin, Simple-Red, Simple-Purple, Simple-Blue, Simple-Gray Scroll Off : Cancels. Once : Scrolls the disc information once. Auto : Repeats scrolling (5-second intervals).
Menu items 3 Aspect* Selectable settings, [reference page] You can change the aspect ratio of the picture. Aspect ratio of incoming signal 4:3 16:9 Full : For 16:9 original pictures Auto : Display • For “DISC”: Aspect ratio is automatically selected to match to the incoming signals. • For the other video sources: Aspect ratio is fixed to . Clock Regular : For 4:3 original pictures NTSC/PAL This setting is valid only to the external monitor connected.
Menu items Selectable settings, [reference page] Menu Language Select the initial disc menu language; Initial English (☞ also page 61). Audio Language Select the initial audio language; Initial English (☞ also page 61). Subtitle Select the initial subtitle language or erase the subtitle (); Initial English (☞ also page 61). OSD Language Select the on-screen language used for the external monitor connected to the VIDEO OUT plug; Initial English.
Menu items Selectable settings, [reference page] D. (Dynamic) Range Compres. (Compression)*5 You can enjoy a powerful sound at a low volume level while playing Dolby Digital software. Auto : Select to apply the effect to multi-channel encoded software. On : Select to always use this function. Speaker Size*5 You can adjust the speaker size setting.
Selectable settings, [reference page] IF Band Width Auto : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) Wide : Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. AV Input You can determine the use of LINE IN and VIDEO IN plugs. Off : Select when no component is connected (“AV-IN” is skipped while selecting the source).
Equalizer Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [43] Sound Menu items Selectable settings, [reference page] Fader/Balance Adjust fader—speaker output balance between the front and rear speakers. • Upmost—front only • Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers.
Disc Surround*14 Menu items Selectable settings, [reference page] Surround Off Select to deactivate the surround function. Surround On Select to activate the surround function. ☞ [22, 23] Auto, Through, Dolby PLII Movie, Dolby PLII Music • When you select Dolby PLII Music, you can adjust and .*15 *14 Selectable only for “DISC” and “USB.” *15 This setting takes effect only when the center speaker is activated.
Bluetooth*17 Menu items Selectable settings, [reference page] Dial Menu Only for the device connected for “Bluetooth Phone.” Select the method to make a call. ☞ [35] Message Only for the device connected for “Bluetooth Phone.”*18 You can read a message from the following message histories. Unread : Messages you have not read. Read : Messages you have read. Unsent : Messages you have not sent. Sent : Messages you have sent. • The number of messages in each history is also shown on the monitor.
Settings Menu items Selectable settings, [reference page] Auto Connect*19 When the unit is turned on, the connection is established automatically with... Off : No Bluetooth device. Last : The last connected Bluetooth device. Order : The available registered Bluetooth device found at first. Auto Answer*20 Off : The unit does not answer the calls automatically. Answer the calls manually. On : The unit answers the incoming calls automatically. Reject : The unit rejects all incoming calls.
Maintenance How to clean the connector To keep discs clean Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
More about this unit Changing the source General • If you change the source, playback also stops without ejecting the disc. Next time you select “DISC” for the playback source, disc play starts from where it stopped previously. Turning on the power • By pressing SRC (source) on the unit, you can also turn on the power. If the source is ready, playback starts. Playing Recordable/Rewritable discs FM/AM • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).
Playing MP3/WMA/WAV/AAC files File playback • This unit can play back files with the extension code <.mp3>, <.wma>, <.wav>, or <.m4a> (regardless of the letter case—upper/lower). • This unit can play back the files meeting the conditions below: – Bit rate: MP3/WMA: 32 kbps — 320 kbps AAC: 16 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG2) 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA) 44.1 kHz (for WAV) 48 kHz, 44.
Enjoying surround sounds USB • If is selected, “MULTI” surround playback automatically starts for multi-channel encoded discs regardless of the setting. • You cannot activate surround for MPEG multi-channel DVD Video, DivX 2-channel and MPEG 2-channel sources. If is selected, stereo sounds are emitted only through the front speakers. “FRONT 2CH” appears on the source information screen.
Bluetooth operations iPod/D. player operations • When you turn on this unit, the iPod or D. player is charged through the adapter connected to this unit. • The text information may not be displayed correctly. This unit can display up to 40 characters. General • While driving, do not perform complicated operation such as dialling the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place.
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, inc. and are used under license.
Language codes (for DVD/DivX language selection) Code Language Code Language Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW KA KK KL KM KN KO KS KU KY LA LN LO LT LV MG MI MK ML MN MO MR MS MT MY NA NE NO OC OM OR PA PL PS PT QU RM RN RO RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SW TA TE TG TH TI TK TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU Afar Abk
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • No sound comes out of the center speaker. General • The monitor is not clear and legible. • The unit does not work at all. • The remote controller does not work. Disc playback FM/AM • “No Signal” appears. Remedies/Causes • Center speaker is not activated. (☞ page 49) Once you have reset the unit, make sure to activate the speaker again.
Symptoms File playback Disc playback • No playback picture appears on the monitor. • No picture appears on the external monitor. • “Eject Error” or “Loading Error” appears on the monitor. • Disc cannot be played back. • Noise is generated. • Tracks are not played back as you have intended them to play. • Elapsed playing time is not correct. • “Not Support” appears on the monitor and track is skipped. • Noise is generated. USB playback • Tracks cannot play back as you have intended them to play.
Symptoms Remedies/Causes • Bluetooth device does not detect the unit. • Bluetooth • • • • • • CD changer • • • • • • This unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. The unit does not detect the Bluetooth • Check the Bluetooth setting of the device. device. • Search from the Bluetooth device.
Symptoms • The iPod/D. player does not turn on or does not work. iPod/D. player playback • The sound is distorted. • “Disconnect” appears on the monitor. • For iPod: Playback stops. • No sound can be heard. • “Error 01” appears on the monitor when connecting a D. player. • “No Files” or “No Track” appears on the monitor. • “Reset 01” – “Reset 07” appears on the monitor. • “Reset 08” appears on the monitor. • The iPod’s or D. player’s controls do not work after disconnecting from this unit.
Specifications Maximum Power Output: Front/Rear: Continuous Power Output Front/Rear: (RMS): DVD/CD FM/AM TUNER AMPLIFIER Signal-to-Noise Ratio: Load Impedance: Equalizer Control Range: Frequencies: Level: Audio Output Level Line-Out Level/Impedance: LINE OUT (FRONT/ Output Impedance: REAR)/CENTER OUT/ SUBWOOFER: Color System: Video Output (composite): Other Terminals: Input: 50 W per channel 20 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
MONITOR USB BLUETOOTH GENERAL Screen Size: 3.5 inch wide liquid crystal display Number of Pixel: 211 200 pixels: 960 (horizontal) × 220 (vertical) Drive Method: TFT (Thin Film Transistor) active matrix format Color System: NTSC/PAL Aspect Ratio: 16:9 (wide) Allowable Storage Temperature: –10°C to +60°C Allowable Operating Temperature: 0°C to +40°C USB Standards: USB 1.1 Data Transfer Rate: Full Speed: Maximum 12 Mbytes Low Speed: Maximum 1.
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN © 2007 Victor Company of Japan, Limited Rear_KD-AVX33A.indd 2 0207MNMMDWJEIN 07.2.
KD-AVX33 Installation/Connection Manual LVT1708-004A 0207MNMMDWJEIN [A] EN ©2007 Victor Company of Japan, Limited This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. Parts list for installation and connection WARNINGS A/B C D E Hard case/Control panel Sleeve Trim plate Power cord The following parts are provided for this unit.
When using the optional stay When installing the unit without using the sleeve Stay (option) In a car having the “Required space for installation” (see page 1), first remove the car radio and install the unit in its place. Fire wall Flat type screws—M5 x 8 mm*2 Dashboard *2 Not included for this unit. Bracket *2 Screw (option) Flat type screws—M5 x 8 mm*2 Bracket *2 30˚ Note: When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws.
ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation. PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.
B Connecting the external amplifiers You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • For amplifier only: – After you have connected the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the connected center speaker, see page 49 of the INSTRUCTIONS.