Owner's Manual

20
ENGLISH
REFERENCES
Source name Display information (for KD-R492/KD-R490)
FM
or AM Frequency Clock (back to the beginning)
(For FM Radio Broadcast Data System stations/FM Radio
Data signal only)
Station name (PS)/Program type (PTY) Radiotext Radiotext+
Radiotext+ title/Radio text+ artist Frequency Clock
(back to the beginning)
CD or USB (For CD-DA)
Disc title/Artist Track title/Artist Playing time Clock
(backtothebeginning)
(For MP3/WMA/WAV/FLAC files)
Song title/Artist Album name/Artist Folder name
File name Playing time Clock (backtothebeginning)
ANDROID When [AUTO MODE] is selected ( 9) :
Song title/Artist
Album name/Artist Playing time Clock
(backtothebeginning)
AUX AUX Clock (back to the beginning)
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the [
SOURCE SELECT ] setting. ( 4)
Radio
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
CD/USB/iPod
Disc cannot be ejected.
Press and hold
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected.
“IN DISC” appears. Make sure nothing is blocking the loading slot when you
eject the disc.
“PLEASE EJECT” appears.
Press
, then insert the disc correctly.
Playback order is not as
intended.
The playback order is determined by the file name (USB)
or the order in which files were recorded (disc).
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and track skips.
Check whether the track is a playable format.
( 18)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 18)
• Reattach the device.
TROUBLESHOOTING
JS_JVC_KD_R690S_K_EN_3.indd 20 7/4/2017 11:01:25 AM