Owner's Manual

24
ENGLISH
KD-R690S/KD-R492 KD-R490
Car fuse block
Ignition switch
Recommended connection
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle factory wiring harness
does not have “12V ignition switch” wire.
Separate red wire
Signal cord (not supplied)
Remote wire
(not supplied)
To the steering wheel
remote control adapter
Fuse (10A)
JVC Amplifier *
1
Factory wiring
harness (vehicle)
Vehicle dashboard
Black: Ground
Yellow: Battery 12V
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Purple: Rear speaker (right)
Purple/black
Join the same color wires together.
Red: Ignition 12V
Orange/white: Illumination
Brown (not used)
Blue/white: Remote (12V
350mA)
Wiring connection
Green: Rear speaker (left) *
2
Green/black *
2
KD-R690S : Expansion port (12 V 500mA)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 11)
*
1
Firmly connect the ground wire of the amplifier to the
car’s chassis to avoid damaging the unit.
*
2
You can also connect a subwoofer speaker directly using
this lead without an external subwoofer amplifier. For
setting,
16 .
IMPORTANT
We recommend installing the unit with a commercially
available custom wiring harness specific for your car
and leave this job to professionals for your safety.
Consult your car audio dealer.
Custom wiring harness
(separately purchased)
Antenna terminal
INSTALLATION/CONNECTION
Output
terminals
JS_JVC_KD_R690S_K_EN_3.indd 24 7/4/2017 11:01:31 AM