Quick Start Guide (Europe)

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BASICS
Faceplate
KD-X272BT:
Volume knob
USB input
terminal
Detach button Display window*1
Auxiliary input jack
*1 Only for illustration purpose.
Attach Detach How to reset
Reset the unit
within 5seconds
after detaching the
faceplate.
To On the faceplate
Turn on the power
Press B SRC.
• Press and hold to turn off the power.
Adjust the volume Turn the volume knob.
Select a source
Press B SRC repeatedly.
Change the display information*2
Press
repeatedly.
*2 One of the display information supports Music Synchronization Effect. The
brightness level of the buttons changes and synchronizes with the music level.
BEFORE USE
IMPORTANT
• To ensure proper use, please read through this Guide before using
this product. It is especially important that you read and observe
Warnings and Cautions in this Guide.
• Please keep the Guide in a safe and accessible place for future
reference.
Warning
Do not operate any function that takes your attention away from safe
driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to
prevent accidents.
• Lower the volume before playing digital sources to avoid
damaging the speakers by the sudden increase of the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no
responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal
tools) inside the unit to prevent a short circuit.
JS_JVC_QSG_KD_X372BT_E_EN.indd 4JS_JVC_QSG_KD_X372BT_E_EN.indd 4 3/7/2019 1:52:23 PM3/7/2019 1:52:23 PM