Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Clock Set
- Forced Eject
- Canceling Demo Mode
- Selecting the Source
- Removing / Attaching Monitor Panel
- Table of Contents
- Parts & Controls
- Getting Started
- Operation
- Menu Operations
- Maintenance
- Additional Information
- Troubleshooting
- Specs
- Installation Manual
- iPod / iPhone Users: Read Before Using
- USB Bluetooth Adapter Instructions
- Important Notice for Bluetooth Users
- Removing the Bluetooth Adapter
- Fixing Faceplate to Unit
- Warranty
73
ENGLISH
Symptom Remedy/Cause
USB/SD
“Now Reading...” keeps flashing on the
screen.
Turn off the power and on again.
While playing a track, sound is sometimes
interrupted.
The tracks are not properly copied into the USB device or
the SD card. Copy tracks again, and try again.
iPod/iPhone
No sound comes out of the speakers. • Disconnect the iPod, then connect it again.
• Select another source, then reselect “
iPod
”.
The iPod/iPhone does not turn on or does
not work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Check whether the iPod control mode is correctly
selected. ( page 29)
• Reset the iPod/iPhone.
Sound is distorted. Deactivate the equalizer either on this unit or the iPod/
iPhone.
A lot of noise is generated. Turn off (uncheck) “VoiceOver” of the iPod. For details, visit
<http://www.apple.com>.
No operations are available when playing
back a track containing Artwork.
Operate the unit after the Artwork is loaded. ( page 30)
Sound does not synchronize with the video.
Select <iPod> for <AV Input>. ( page 50 )
• Videos cannot be played.
• No sound of videos come out.
• Connect with USB Audio and Video cable JVC KS-U30.
Other cables cannot be used.
• Select <iPod> for <AV Input>. ( page 50 )
AV-IN
No picture appears on the screen. • Turn on the video component if it is not on.
• Connect the video component correctly.
EN_KW-AV70JJW.indb 73 11/12/13 13:09