Owner's Manual

Other External Components
53English
Other External Components
View Camera
NOTE
• To connect a camera, see P.91.
• To use a rear view camera, a REVERSE lead
connection is required. (P.88)
• If [Rear Camera Interruption] is active the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ Display the camera screen
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [Camera].
 View camera screen appears.
3
Adjust each item as follows.
To erase the caution message, touch the
screen.
2
1
1
Switching the View Camera
*1
Touch to change the front view camera and
rear view camera.
2
Camera off
Touch to exit the camera screen.
*1
When the front camera and rear camera are
connected with this unit.
Ñ Camera Setup
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 SETUP screen appears.
4
Touch [Camera].
 Camera screen appears.
5
Set each item as follows.
■ [Rear Camera Interruption]
[ON] (Default): Displays the picture from the
rear view camera when you shift the gear
to the reverse (R) position.
[OFF]: Select this when no camera is
connected.
■ [Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
■ [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
you can adjust the parking guidelines. See To
adjust the parking guidelines (P.54).
■ [Front Camera]
[ON]: Select this when the front camera is
connected.
[OFF] (Default): Select this when no camera is
connected.
■ [Front Camera Interruption]
*2
[10 sec]/ [15 sec] (Default)/ [20 sec]: The front
camera screen is displayed when return
the gear from the reverse (R) position.
[OFF]: Cancel.
*2
Only when “Front Camera” is set to “ON”.