Owner's Manual

Setup
68
User Interface Setup
You can setup user interface parameters.
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 SETUP screen appears.
4
Touch [User Interface].
 User Interface screen appears.
5
Set each parameter as follows.
■ [Beep]
Turn the key touch tone on or off.
Default is “ON”.
■ [Information Window SETUP]
Set up the Information window displayed on
the HOME screen. (P.18)
■ [Monitor Touch Control Effect]
Determine whether to show the trace of
finger under monitor touch control. (P.11)
“ON” (Default)/ “OFF”
■ [Parking Assist Display]
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
■ [Parking Assist Position]
Select where to display information about
obstacles on the screen (left or right).
“Left”/ “Right” (Default)
This can be set when the iDataLink
(commercially available) is connected.
■ [Language Select]
Select a language.
■ [Touch Panel Adjust]
Adjust the sensing position of the touch
panel. (P.69)
■ [Time Format]
Select the time display format.
"12-Hour" (Default)/ "24-Hour"
■ [Clock]
[[RDS-SYNC] ](Default): Synchronizes the
clock time with the RDS.
[Manual]: Set the clock manually.
■ [Time Zone]
Select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P.69)
■ [DISP Key]
Select the source screen displayed when
in the popup menu screen is pressed.
[OFF]: Displays the control screen of the
current source.
[Mirroring] (Default): Switches to the App
screen from the connected iPhone/
Android device or to the Apple CarPlay
screen from the connected iPhone when
the button is pressed. (P.25)