Owner's Manual

Table Of Contents
Disc
22
[Hide]: Hides the control screen.
[
] : Repeats the current content. Each time
you touch the key, repeat modes are switched
in the following sequence;
DVD: Title repeat (
), Chapter repeat
( ), Repeat off ( )
VCD (PBC On): Does not repeat
VCD (PBC Off ): Track repeat ( ), Repeat off
( )
2
Function panel
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
I]: Stops playback. Touching twice will play
the disc from the beginning when you play it
next time.
[
] [ ]: Fast-forwards or fast-backward the
disc. Each time you touch the key, the speed
changes. 2 times, 10 times.
[
] [ ] (DVD only): Plays in slow motion
forward or backward.
[SETUP] (DVD only): Touch to display the DVD
SETUP screen. See DVD SETUP (P.26).
[MENU CTRL] (DVD only): Touch to display
the DVD-VIDEO disc menu control screen. See
DVD Disc Menu Operation (P.25).
[PBC] (VCD only): Touch to turn Playback
control (PBC) on or off.
[Audio] (VCD only): Touch to change audio
output channels.
[Direct Number] (VCD only): Touch to display
the Direct Number dialog when Playback
control (PBC) is on. You can directly enter
the track number to play only when scene is
selected.
[
](VCD only): Returns to the previous scene
only when Playback control (PBC) is on.
3
Play mode indicator/Playing time
D, B, I, etc.: Current play mode indicator
Meanings of the icons are as follows: D (play),
B (fast forward), A (fast backward),
I (stop),
R
(resume stop), H (pause), (slow
playback), (slow reverse playback).
For confirmation of current playing position.
You can drag the circle left or right to change
the playing position.
4
Operation keys
[E] [F] : Searches for the previous/next
content.
Touch and hold to fast-forward or fast-
backward the disc.
[DH] : Plays or pauses.
[
] : Touch to attenuate/restore the sound.
5
Indicator Items
[IN]: Disc insertion status.
White: A Disc is inside the unit.
Orange: Disc player failure.
VCD
[1chLL/2chLL]: Identifies the left audio output
of channel 1 or 2.
[1chLR/2chLR]: Identifies the monaural audio
output of channel 1 or 2.
[1chRR/2chRR]: Identifies the right audio
output of channel 1 or 2.
[1chST/2chST]: Identifies the stereo audio
output of channel 1 or 2.
[LL]: Identifies the left audio output.
[LR]: Identifies the monaural audio output.
[RR]: Identifies the right audio output.
[ST]: Identifies the stereo audio output.
[PBC]: The PBC function is on.
[VER1]: The VCD version is 1.
[VER2]: The VCD version is 2.
6
Searching area
Touch to search for the next/previous content.
7
Key display area
Touch to display the control screen.
8
[MENU CTRL] (DVD only)
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation
(P.25).
NOTE
The control screen disappears when no operation
is done for 5 seconds.
If you use a remote control, you can jump directly
to the desired image by entering the chapter
number, scene number, etc. (P.90)