Owner's Manual

Table Of Contents
APPS
34
NOTE
USB (Gray) terminal does not support USB
Mirroring.
You cannot use the Bluetooth and iPod sources at
the same time with Mirroring for JVC application.
OSD clock is not shown on the mirroring screen
of this unit regardless of the setting made for
[OSD Clock] (P.76).
Depending on the connected Android
smartphone, you may need to enable virtual
keyboard setting on your smartphone to display
software keyboard on the screen of this unit and
on your smartphone.
Mirroring for JVC application is discontinued
by the following operations if you use the
application with an iPhone:
Receiving an incoming call
iPhone's screen recording function is stopped
iPhone screen is turned off
To resume the mirroring operation, disconnect
the iPhone from the USB Audio cable, and try
connecting it again.
The audio may be of poor quality, interrupted or
skipped, depending on several conditions such as
network condition, the application and etc.
If you perform pairing with another device during
mirroring, mirroring (audio and/or video) will be
disturbed or paused.
Some applications may not support audio
sharing.
Some operations may not work depending on
the compatibility between this unit, Mirroring for
JVC application and your smartphone.
Ñ Operation keys on the
mirroring screen
On the USB mirroring screen, the following
virtual hard keys are available. The keys are
hidden when no operation is done for about
5 seconds. You can display back them anytime
by touching the screen.
[
]/[ ]: Changes the virtual hard keys position
shown on the screen of this unit.
[󲄅]: Returns to home page.
[×]: Closes the virtual hard keys.
[
]: Shows the recent applications (Android
only).
[
]: Returns to the previous page (Android
only).
NOTE
These keys differ depending on the connected
device and may differ from the function operated
from the device.
These keys can be displayed even if there is no
hard key on the connected device.
Ñ Disconnect mirroring
You can disconnect mirroring by
disconnecting your smartphone from the USB
(Black) terminal from the rear panel.
NOTE
Once you disconnect from mirroring operations,
stop broadcast on iPhone's screen recording
function. Otherwise “iPod” source and “Bluetooth
source may not work correctly.