ENGLISH FRANÇAIS ESPAÑOL KW-R925BTS / KW-R920BTS CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS RECEPTOR CON CD MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. B5A-0831-00 [K] JS_JVC_KW_R925BTS_K_C.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/ registration number only signifies that the Industry Canada technical specification were met.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. 1 Cancel the demonstration 2 Set the clock 3 Set the basic settings Warning Do not operate any function that takes your attention away from safe driving.
BASICS Faceplate How to reset Loading slot Remote control (RM-RK52) Remote sensor (Do not expose to bright sunlight.) Display window TI Press twice within 5 seconds. ST Pull out the insulation sheet when using for the first time. How to replace the battery Volume knob KW-R925BTS: USB cable from the rear of the unit To On the faceplate On the remote control Turn on the power Press . • Press and hold to turn off the power. ( Not available ) Adjust the volume Turn the volume knob.
GETTING STARTED 3 Set the basic settings . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press to exit. To return to the previous setting item, press . Default: XX SETTINGS 1 Cancel the demonstration When you turn on the power for the first time (or [FACTORY RST] is set to [YES]), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB” 1 Press the volume knob.
GETTING STARTED RADIO CLOCK CLOCK SYNC AUTO: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; OFF: Cancels. CLOCK DISP ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. ENGLISH Select the display language for menu and music information if applicable. By default, ENGLISH is selected. ESPANOL “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
RADIO Select a stored station Press or one of the number buttons (1 to 6). (or) 1 Press . 2 Turn the volume knob to select a preset number, then press the knob to confirm. Other settings . 1 Press and hold 2 Turn the volume knob to select [TUNER], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press to exit. .
CD / USB / iPod / ANDROID Start playback The source changes automatically and playback starts. CD Eject disc Label side USB input terminal USB USB 2.0 cable*1 (commercially available) KW-R925BTS: You can also connect to the USB cable from the rear of the unit.
CD / USB / iPod / ANDROID Select control mode While in IPOD FRONT/ IPOD REAR/ USB-IPOD source, press repeatedly. HEAD MODE: Control iPod from this unit. IPHONE MODE: Control iPod using the iPod itself. However, you can still play/pause or file skip from this unit. Select a file from a folder/list . 1 Press 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA] in [SRC SELECT]. ( 4) Create and save a new station . 1 Press 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob. A new station is created based on the current song or artist.
iHeartRadio® Preparation: Install the latest version of iHeartAuto application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART] in [SRC SELECT]. ( 4) Start listening 1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal. USB input terminal To On the faceplate On the remote control Playback / pause Press the volume knob. Press Skip a track for custom station Press T. Press I.
SiriusXM® Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. Start listening 1 Press 2 Press . Preparation: 5 Turn the volume knob to select a channel, then press the knob. repeatedly to select SIRIUS XM.
SiriusXM® Radio When you select a SmartFavorites channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. • Playback starts from the beginning of the song if [TUNE START] is set to [ON] ( 13) for most music channels stored as a SmartFavorite. SiriusXM Replay™ 1 Press the volume knob. “ ” lights up and the unit memorizes this paused position. 2 Press the volume knob to start Replay. Replay starts from the paused position in step 1.
SiriusXM® Radio SiriusXM settings . 1 Press and hold 2 Turn the volume knob to select [SIRIUS XM], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. 5 Press to exit. . To return to the previous setting item, press Default: XX CH LOCK To unlock settings: 1 Turn the volume knob to select a number.
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) Connect the microphone Rear panel MIC (Microphone input terminal) Microphone (supplied) Pair and connect a Bluetooth device for the first time to turn on the unit.
BLUETOOTH® Auto Pairing BLUETOOTH — Mobile phone When you connect the iPhone/ iPod touch/ Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. – [AUTO CNNT] is set to [ON]. ( 18) – JVC MUSIC PLAY application is installed on the Android device ( 7) and [AUTO MODE] is selected ( 8).
BLUETOOTH® To On the faceplate While talking on the first incoming call... Answer another incoming call and hold the current call Press knob. Reject another incoming call Press and hold the volume knob. or the volume or ( Not available ) ( Not available ) While having two active calls... Press and hold the volume knob.
BLUETOOTH® Make a call using voice recognition Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. To return to the previous setting item, press .
BLUETOOTH® Bluetooth mode settings 1 Press and hold . 2 Turn the volume knob to select [BLUETOOTH], then press the knob. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item. to exit. To return to the previous setting item, press 5 Press . Default: XX PHONE*1 AUDIO*1 Selects the phone or audio device to connect or disconnect.
BLUETOOTH® BLUETOOTH — Audio Internet radio via Bluetooth Listen to Pandora You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA] in [SRC SELECT]. ( 4) 1 Open the Pandora application on your device. 2 Connect your Bluetooth audio player via Bluetooth connection. ( 14) 3 Press repeatedly to select PANDORA. The source switches and broadcast starts automatically. You can operate Pandora in the same way as Pandora for iPod/iPhone.
AUX AUDIO SETTINGS Use a portable audio player 1 Connect a portable audio player (commercially available). 3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available) Auxiliary input jack Portable audio player 2 Select [ON] for [AUX] in [SRC SELECT]. ( 4) 3 Press repeatedly to select AUX. 4 Turn on the portable audio player and start playback. Use a 3-core plug head stereo mini plug for optimum audio output. Select a preset equalizer Press repeatedly.
AUDIO SETTINGS Default: XX SUB.W LEVEL *1 EQ SETTING EQ PRESET Select a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].) FLAT / HARD ROCK / POP / HIP HOP / R&B / JAZZ / CLASSICAL / USER EASY EQ Adjust your own sound settings. The settings are stored to [USER]. • The settings made may affect the current settings of [PRO EQ]. SUB.W SP *1*2: 00 to +06 (Default: 03 1 3 SUB.
AUDIO SETTINGS (For KW-R920BTS) SND EFFECT Audio signal through lineout terminal (Not applicable for TUNER source.) SML/ MED/ LRG: Virtually enhances the sound space. ; OFF: Cancels. Setting on [SPK/PRE OUT] RESPONSE LV1/ LV2/ LV3: Virtually makes the sound more realistic. ; OFF: Cancels. REAR/REAR Front speakers output Rear speakers output SOUND LIFT LV1/ LV2/ LV3: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. REAR/SUB.
AUDIO SETTINGS Crossover settings Below are the available setting items for 2-way crossover and 3-way crossover. Caution Select a crossover type according to how the speakers are connected. ( 33) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. 2-way crossover setting items SPK SIZE FRONT SIZE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6"/ 5×7"/ 6×8"/ 6×9"/ 7×10" TWEETER SML/ MID/ LRG/ NONE (not connected) REAR *1 3.5"/ 4"/ 4.75"/ 5"/ 6.
DISPLAY SETTINGS AUDIO SETTINGS 3-way crossover setting items SPK SIZE TWEETER SML/ MID/ LRG MID RANGE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6"/ 5×7"/ 6×8"/ 6×9" WOOFER * 6.5"/ 8"/ 10"/ 12"/ 15" OVER/ NONE (not connected) X ' OVER TWEETER MID RANGE WOOFER * HPF FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.
DISPLAY SETTINGS BRIGHTNESS SCROLL *2 Set the brightness for button and display illuminations for day and night separately. 1 DAY / NIGHT: Select day or night. 2 Select a zone. ( 24) 3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15) NIGHT COLOR ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second intervals. ; OFF: Cancels. COLOR PRESET DAY COLOR COLOR GUIDE Select color for display and button illuminations separately.
REFERENCES Change the display information Each time you press , the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other information (eg. station name) appears.
REFERENCES • Detailed information and notes about the playable audio files are stated in an online manual on the following website . Playable files • Playable audio file: MP3 (.mp3)/ WMA (.wma)/ AAC (.aac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
TROUBLESHOOTING CD / USB / iPod Radio • Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SRC SELECT] setting. ( 4) • Radio reception is poor. • Static noise while listening to the radio.
TROUBLESHOOTING SiriusXM® Radio Remedy Symptom Remedy “CHK ANTENNA” Check that the antenna and its connection are in good condition. “CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit. “NO SIGNAL” Make sure the antenna is mounted outside the vehicle. “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” Your subscription is updated. Press the volume knob to continue. “CODE ERROR” Make sure you have entered the correct pass code.
TROUBLESHOOTING Bluetooth® “PAIRING FULL” “PLEASE WAIT” “NOT SUPPORT” FM Frequency Range • Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.) • Disconnect and connect the Bluetooth player again. The number of registered devices has reached its limit. Retry after deleting an unnecessary device. ( 18, DELETE PAIR) Tuner The connected Bluetooth audio player cannot be controlled.
Bluetooth USB 1.1, USB 2.0 (Full speed) Compatible Devices Mass storage class File System FAT12/ 16/ 32 Maximum Supply Current DC 5 V Digital Filter (D/A) Converter 24 Bit MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 WMA Decode Compliant with Windows Media Audio AAC Decode AAC-LC “.aac” files WAV Decode Linear-PCM FLAC Decode FLAC files Frequency Response (±3 dB) 20 Hz — 20 kHz Input Maximum Voltage 1 000 mV Input Impedance 30 kΩ Version Bluetooth Ver.2.1+EDR/ Bluetooth 3.
INSTALLATION / CONNECTION Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • Insulate unconnected wires with vinyl tape to prevent a short circuit. • Be sure to ground this unit to the car’s chassis again after installation.
Wiring connection Signal cord (not supplied) Output terminals ( 32) JVC Amplifier *1 (For KW-R925BTS) USB cable (DC 5 V 1.5 A) (approx. 1.
libFLAC Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
. . . w a::: :z: ~ c :::::i LL W en c:c o :::;) ~ ti w w U) 0 w U) !z 1.\ CAUTION ~ INCORRECT CONNECTION CAUSES SERIOUS DAMAGE TO THIS UNIT PLEASE READ INSTALLATION/CONNECTION MANUAL CAREFULLY. i= :::::l 1- m c:c :z w 0 ~ ...... ~
U.S.A. JVCKENWOOD USA Corporation TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. .JVC LIMITED WARRANTY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVCKENWOOD USA Corporation warrants this product and all parts thereof, except as set forth below ONLY TO TH E ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below.
.Jvc CANADA JVCKENWOOD CANADA INC. WARRANTY GARANTIE Warranty applies only to PRODUCT di stributed in Canada by JVC KENWOOD CANADA INC. La garantls' applique seulement aux PRODUITS distrlbues au Canada par JVCKENWOODCANADA INC. JVCKENWOOD CANADA INC. (hereafter called "JVC") gives the following express warranty for each new JVC product distributed in Canada by JVC and sold by an authorized JVC dealer.