Operation Manual

48
SETTINGSSETTINGS
Settings for using applications of
iPod touch/iPhone/Android
Before using applications of iPod touch /iPhone/
Android, select the device to use.
When connecting the device for the first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
Preparation:
• For Android: Connect the Android device via
Bluetooth. (Page39)
• For iPod touch/iPhone:
– Connect iPod touch/iPhone with a cable
(Page65) or via Bluetooth (Page39).
– Select the connection method of iPod touch/
iPhone on <iPod Setup>. (Page21)
1 Display the <Settings> screen.
On the Home screen:
KW-V330BTKW-V230BT
KW-V235DBT
2 Display the <System> setting screen.
3 Display the <APP Setup> screen.
• If [Enter] for <APP Setup> cannot be
selected, turn off the AV source. (Page7)
4 Select the device type (1), then press
[Change] (2).
5 Select the connection method (1), then
confirm the selection ([OK] or [Next]) (2).
For Android:
[Bluetooth] Select this when the device is
connected via Bluetooth. (Go to
step 6.)
For iPod/iPhone:
[USB 1
Wire]
Select this when the iPod/iPhone
is connected using KS-U62
(optional accessory) or 30-pin
to USB cable (accessory of iPod/
iPhone).
[USB +
AV-IN]
Select this when the iPod/iPhone
is connected using KS-U59
(optional accessory).
[Bluetooth] Select this when the iPod/ iPhone
is connected via Bluetooth. (Go
to step 6.)
6 When selecting [Bluetooth] as the
connection method, the paired device list
appears. Select the target device (1), then
press [OK] to connect (2).
• If the device is already connected, skip step 1.
2017_KW-V_Entry_E.indb 482017_KW-V_Entry_E.indb 48 2016/09/27 17:412016/09/27 17:41