Operation Manual

64
See page 66.
See page66.
USB terminal (1.0 m): See page65.*
1
10 A fuse
Connect to the vehicle’s reverse
lamp harness when using the
optional rear view camera.
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
To the OE remote adapter (not supplied) which is compatible with your car.
• If no connections are made, do not let the cable come out from the tab.
Purple with white stripe
(Reverse sensor wire)
Light green (Parking sensor wire)
Light blue with yellow stripe (Steering remote control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
*
1
Only for KW-V330BT.
*
2
Only for KW-V235DBT.
*
3
For KW-V230BT/KW-V330BT: The appearance of the aerial terminal is different from the illustration.
*
4
For 3 way speaker system connection, see also page66.
Connector A
Connector B
Connect the aerial cord to the aerial
terminal.*
3
3
1
Pin Color and functions of Connector A and B
A4 Yellow Battery
A5 Blue/White Power control (12 V
350 mA)
A6 Orange/White Dimmer
A7 Red Ignition (ACC)
A8 Black Ground connection
B1/B2
Purple ª / Purple/Black ·
Right speaker (rear/tweeter)*
4
B3/B4
Gray ª / Gray/Black ·
Right speaker (front/mid range)*
4
B5/B6
White ª / White/Black ·
Left speaker (front/mid range)*
4
B7/B8
Green ª / Green/Black ·
Left speaker (rear/tweeter)*
4
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Vehicle
Red (A7)
Yellow (A4)
Default wiring
Connecting the ISO connectors
You may need to modify the wiring of
the supplied wiring harness as illustrated
below.
CONNECTION/INSTALLATIONCONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals
*
2
2017_KW-V_Entry_E.indb 642017_KW-V_Entry_E.indb 64 2016/09/27 17:412016/09/27 17:41