INSTRUCTIONS(Installation/IP Address Settings)

Installing the Camera on
the Ceiling
Configure the video format settings using the
SYSTEM SELECT switch before installing.
1
Remove the 4 feet from the bottom surface
of the camera
.
2
Use three M3 screws and one 1/4 inch
screw that come with the camera to attach
the
ceiling mounting bracket (camera side)
to the bottom surface of the camera
.
3
Mount the camera to the ceiling mount
bracket (ceiling side)
Attach the hook on the ceiling mounting bracket
(camera side) to the hole on the ceiling
mounting bracket (ceiling side).
4
Use three M3 screws that come with the
camera to attach
.
Fasten the drop prevention wire (sold
separately) together with one of the screws.
.
Connect the cables after these procedures.
22
Installing the Camera on the Ceiling
Installation/Connection