User Guide

40
Setting Using Internet Explorer
Camera Page (continued)
Setting (continued)
A
B
C
D
E
F
G
H
I
J
K
M
L
H Stabilizer This function prevents image shaking caused by vibration.
Set this function to AOnB to control image shaking.
Off : Disabled.
On : Enabled.
M
emo:
● When the function is set to A On B , the screen is enlarged to approximately 1.3
times.
● Adjustment is disabled in the electronic zoom area.
● Adjustment is disabled for about 1 minute after power ON and during Pan/Tilt/
Zoom operation.
● Adjustment may not work when the vibration is fast. The effect can be small
when vibration direction does not match with Pan/Tilt position. Depending on
the installation environment, the stabilizer may malfunction and increase
image shaking due to the vibration transmitting to the camera. In this case,
set the stabilizer to A Off B .