JVC DVD VIDEO PLAYER LECTEUR DVD VIDEO XV-S6OBK ,,c QQ_ QOG 66_ _c_oc o oc ,,iv= ×V_DWCD_LA_ER DIGITALAUDI0 JIUr f'_l'_dilDI JPBW qlPV#vIJr I I IILIIf _ EliEWBI INSTRUCTIONS MANUEL D'INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.
Warnings, Cautions and Others Mises en garde, precautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION: REFER TO REDUCE THE RISK OF ELECTRIC SHOCK. ATTENTION DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction Table of Contents Page 2 Features ............................................................................... 2 Supplied accessories .......................................................... 2 About this instruction manual .......................................... 3 Notes on handling .............................................................. 4 Page 5 Names of parts and controls ............................................. Front panel .................................................
/i Features Supplied accessories This unit is a compatible CD and Video CD discs. • Progressive player for DVD VIDEO, Audio Scan system • Audio/video cable (x 1) • Component video cable (x 1) Supports the Progressive scan system, as well as the conventional (current) Interlace scan system. * To enjoy the progressive video picture, you must connect the unit to a television or monitor that supports mStrobe the progressive video input.
Introduction About this instruction manual • This instruction manual is written in the following manner. • Regarding operations for MP3 discs, see "MP3 disc playback" basically do not refer to MP3 disc playback. on and after page 41. The other sections of this manual F You can play tracks on an AUDIO CD or Video random order by using the Random function. --These symbols indicate the types of discs which the operation can be used for.
Introduction Notes on handling Important cautions Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C, 41°F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the player in a place subject to vibrations. Power cord • Do not handle the power cord with wet hands! • A small amount of power (1.5 W) is always consumed while the power cord is connected to the wall outlet.
L=_"Um Names of parts and controls Refer to the corresponding _ STANDBY pages indicated indicator in 0 for details. @ Remote sensor _2_STANDBY/ON _/I button (5) _ (OPEN/CLOSE) button Disc tray DVD/CD PLAYER oP_ J/CLOSE ® PLAY I "aOGRESSlVE __ _ n-_-PAUSE) button J (7) Display window _) PROGRESSIVE PAUSE indicator _0)l_ (PLAY) button _9_• (STOP) button _) i<
Preliminary knowledge 1C_Infrated signal-emitting window _5_TV STANDBY/ON _/I button _ TV - DVD switch OPEN/CLOSE button @ DVD STANDBY/ON 3D PHONIC _ REPEAT button @ RETURN button TV/VIDEO CANCEL _ 3D PHONIC button (D (Z) (%) TV4 _ Numeric buttons (Z) (Z) TV5 TV7 Oil button _9_TV/VIDEO button - CANCEL TV6 TV8 TV9 (Z) (Z) (Z) TV -/-- TV0 MUTING _ VFP - PROGRESSIVE SCAN button ANGLE button SUBTITLE AUDIO VFP _ SUBTITLE button _ ZooMSC+ AN DIGEST O_ DIGEST button I<
Preliminary I<
Preliminary knowledge Disc indicator I _2)Group/title/track/ chapter indicators IGR0UP TITLE T.
Preliminary knowledge L=_"Um Operational Principles You can set preferences and perform advanced playback functions via various on-screen displays, including the Opening, Preference, Parental lock and Control displays. Basic operations of on-screen displays • You can move I_ using the CURSOR A/_'/
Preliminary knowledge PREFERENCE (1, 2) displays (see page 44) You can set preferences PREFERENCE 1) PREFERENCE 2) via these displays. To bring up the PREFERENCE I/PREFERENCE display DIG_AL 2 AUO_O_NGUAGE _r_ffaz_, suBnn_E _' O.SC.EE"_UAGE _D I I I .ONTO.TYpE _D 1 When a DVD VIDEO disc is set and stopped or no pROGRESSIVE disc is inserted, press CHOICE. MODE_ I _ _> AUDIO OUTPUT COMP.ESS_O.
Preliminary VCD CONTROL There are two display shown CD playback. When a Video CD CONTROL display Current relative position of the track Current track (St: start, End: end) number types of VCD CONTROL display. The on the right is avairable only during Video RE_ATALL CD disc is stopped, display appears. a display similar to the I P_ESS ENTE_=_E×ECUTE I " I To bring up the VCD CONTROL display Press ON SCREEN when a Video CD is inserted. The appropriate status.
Preliminary knowledge During DVD VIDEO playback, the following meanings. Displayed you may see icons displayed over the picture. at the beginning of a scene recorded from 0)) Displayed at the beginning page 37.) of a scene recorded with multiple audio languages. © Displayed at the beginning page 36.) of a scene recorded with multiple subtitle You can set the unit not to display described on page 45. About invalid operation on-screen multiple These have angles. (See page 35.
Preliminary knowledge About discs Playable and non-playable disc types are as follows: Playable discs DVD VlDEO Video CD Audio CD v,o,o- VideoCD ,o...VOEO, DIr-ITAL AUDIO The DVD VIDEO Logo is a trademark. • CD-R and CD-RW discs recorded with the Audio CD or MP3 format can be played back. • Some disc may not be played back because of the disc characteristics or recording condition. • DVD VIDEO players and DVD discs have their own Region Code numbers.
Connections *In the following description, "TV" may be substituted with "monitor" or "projector." *Before using the unit, you have to connect the unit to a TV and/or amplifier. • Do not connect the AC power cord until all other connections have been made. • Since different components often have different terminal names, carefully read the instructions component you are going to connect. You can enjoy playback by simply connecting the unit to a TV. To improve jacks to your separate audio equipment.
Getting You can enjoy high picture quality by connecting jacks of your TV with the video cables. the unit's COMPONENT Component Green_ The unit _ _Red VIDEO OUT jacks to the COMPONENT started VIDEO IN video cable (supplied) Blue Green_-- 3Red TV Red IN _ White [ VIDEO White IN LEFT _ AUDIO -VIDEO RIGHT Audio/Video (supplied) cable Red The unit supports the Progressive scan system as well as the conventional Interlace scan system.
Getting started About SCAN MODE To display video on the monitor (television) screen, the conventional scanning method is called "Interlaced scan': With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture (frame); i.e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing all the even-numbered lines.
Getting started You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound.
Getting started Using the remote Using the remote control, The battery compartment control unit you can operate not only all the functions is located on the back of the remote control of the unit but also basic functions of your TV. unit. 1 Press down on the point shown by the arrow at the top of the compartment cover, and pull up the cover to open the compartment.
Getting You can operate your TV from the remote Setting the remote control control unit. signal for operating • r-- TV. DVD STANDBY/ON TV/VIDEO - CANCEL ,buttons your -TV - DVD switch TV STANDBY/ON Oil ,- Numeric started O _)/I QQ button JV8 Holding down TV/VIDEO - CANCEL, enter the manufacturer code of your TV listed below buttons (0 to 9). Do not release TV/VIDEO - CANCEL. Keep holding it until the next step is completed.
Getting started The following buttons can be used for operating the TV: To use the CURSOR (CH-, CH+, VOL-, VOL+), TV/VIDEO - CANCEL and numeric TV - DVD switch to "TV" [ TV OVD] (_ Turns the TV TVNIDEO CA,CEL on or buttons for TV control, set the off. Switches the TV input mode between TV and VIDEO. Selects the TV channels directry.
In the following description, the buttons on the remote control unit are mainly used, however, corresponding buttons on the front panel of the unit if available. you may use the Turning on/off the unit Press DVD STANDBY/ON (b/Ion the remote control unit or press STANDBY/ON STANDBY/ON OPEN /CLOSE o_ (Z) Tv4 (Z) (Z) Tv5 . . DVD STANDBY/ON _/I 36 TV/V_D_O REPEAT_HONECCANCELR_TU_N (Z) ...... I_ _/I on the front panel.
Basic operations Basic playback Note that this section describes basic operations for playback of DVD VIDEO, Audio CD and Video CD discs. For MP3 disc playback, see the independent chapter on and after page 41. control buttons 1 Basic control buttons Press The unit starts playback from the begining. NOTES • When the resume • During • With Video CD discs with PBC control or some DVD discs, the menu back. In such a case, select an item to be played back from the menu.
Basic operations • During Method playback 1 (from the remote Press_ control unit only) or _. Each press of _141or _ normal speed. increases the playback speed. You can select the speed among 2x, 5x, 20x and 60x the Pressing _ returns the unit to normal playback. Method 2 H01ddown I_ or _i. Holding down I_1_1advances playback rapidly, while holding down _ reverses playback normal speed. Releasing the button returns the unit to normal playback.
Basic operations Resuming playback The unit can memorize • During the position on a disc where you interrupt playback, and resume playback from that position later. playback Press.., or press DVDSTANDBY/0N(b/I on the remote control unit or STANDBY/0N(b/I on the front panel. The unit memorizes the interrupted position. • If you interrupt playback by pressing • and then turn off the power, the memory is not cleared.
• Note that this section describes operations for playback of DVD VIDEO, Audio CD and Video CD discs. For MP3 disc playback, see the independent chapter on and after page 41. • Make sure that the TV - DVD [ TV_DVD switch is set to "DVD" using the CURSOR A/_'/_I/I_, when numeric and TV/VlDEO - CANCEL buttons for controlling the unit. ] Playing from a specific position on a disc You can play a disc from the selected track, title or chapter, or from the specified time.
Advanced operations The unit starts playback of the selected item. You can return to the menu by pressing the RETURN button. When "NEXT" or "PREVIOUS" appears on the TV screen, the unit generally works as follows: • Pressing I_1_1advances to the next page. • Pressing 14_ returns to the previous page. * The method of the operation is different depending on the disc. Depending on the disc type and the unit status, what is specified differs.
Advanced • To skip forward chapters/tracks, press I_1_1as many times as required. • To skip to the beginning of the current track/ chapter, press 14_ once. • To skip back chapters/tracks, press _ as many times required. 4 operations Press ENTER. The unit starts playback from the selected chapter. • The "10" and "+10" buttons are not used in this function. NOTES • This function may not work with some DVD VIDEO discs. • This function does not work during Video CD playback with PBCfunction.
Advanced operations 3 Usethe numeric buttons (0 to 9) to enter the time. NOTES The specified time appears in the message area. • When C) appears on the TV screen in step 2: The time you have selected is not contained on the disc, or the time search function does not work on the disc. 4 Press ENTER. The unit starts playback from the specified time. Also note that the time search function during for DVD VIDEO) for Audio CD) Video CD playback does not work with the PBC function.
Advanced • While a DVD VIDEO disc is stopped: The opening scene of each title appears on the TV screen. • During DVD VIDEO disc playback: The opening scene of each chapter in the current title appears on the TV screen. • When a Video CD disc is loaded: The opening scene of each track appears on the TV screen. 2 Use CURSOR llvl_il!,,scene. operations Special picture playback The unit provides special picture playback functions including Frame-by-frame, Strobe, Slow-motion and Zoom.
Advanced operations • Pressing II when the nine still pictures are shown will advance pictures frame by frame. Z_, TW Z'_ Q_ • To cancel strobe play Press and hold II for more than 1 second. _ S_E 1 _ NOTE • If you pressand hold II for more than 1 second during playback, nine still pictures also appear but they advance in normal playback speed. 2 JVC • During playback or while paused 1 PressZOOM+ or-. The unit zooms in by pressing ZOOM + or zooms out by pressing ZOOM -.
Advanced operations Up to 24 tracks can be programmed. You may select the same track more than once. Changing the playback order 1 You can play tracks on a disc inserted in the desired order (for Audio CD) or in random order (for Audio CD/ Video CD). PRESS NUMERIC 2__ 3__ 4__ 10 5 8 10 11 18 19 I KEY 5__ 6 12 13 14 15 20 21 22 23 STOP Selected 7 8_ 16 24 • track number If you specify a wrong selection Press TV/VIDEO - CANCEL.
Advanced operations Repeat playback You can play tracks on an Audio CD or Video CD disc in random order by using the Random function. R_T #_ _L TV_ #_ T_2 TV You can repeat playback of the current selection or all disc contents (except DVD VIDEO). You can also repeat playback of a desired part. _3 T#O _?J I_G Method 1 3 1 _ _,,_OEO 1 .IVl_ _m _r_ • While stopped 1 Press ON SCREEN. The on-screen 2 display Use CURSOR A/v for Audio CD) appears on the TV screen.
Advanced Method operations Audio CD/Video CD 2 for Audio CD) for Video CD) \l,_,4.i<.l:.J;c.lq TRACK _ R_T P_ _L _ T_2 _7 T_ TV TIME O,S8 .... R_N TV3 TV9 Z,0 PRESS ENTER_ _U,,._ Selected Selected repeat mode .
Advanced operations NOTES • To turn off on-screen display Press ON SCREEN. • If (_ appears when pressing DVD VIDEO playback You cannot contents. _ _,,_OEO TVf TV2 TV TVO _ _3 '¢ JJTIH c...) c..) 2-1, -2-2, 3 -1 -ivc • During playback 1 Press ON SCREEN. The on-screen display 2 Use CURSOR A/v appears on the TV screen. to move _> to [A-B REPEAT],then press ENTERat the beginning of the part you want to repeat (point A). The color of [A-B REPEAT] changes.
Advanced operations Selecting a scene angle of DVD VIDEO You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. NOTES • The Angle selection display will automatically disappear if you do not change the angle for several seconds. • To turn off the Angle selection display manually, press ENTER.
Advanced operations Changing the language and sound For DVD VIDEO discs, you can select the subtitle language, as well as the audio language/sound included on a disc. For Video CD discs, you can select the audio channel(s). Z_ TV0 _,_U_"_ __ _ c..) c..._ From normal screen r.llo_ __ _ TV TV3 _4 TVS TV6 TV0 • During DVD VIDEO playback 1,2-- biLl I_ Z_, 1 Press and h01dANGLE for more than 1 second. t - Up to nine camera angles recorded on a disc appear on the TV screen.
Advanced From on-screen operations display TV' 7'2 _' By AUDIO selection, you can choose the audio language of movies or enjoy karaoke with or without the vocal. T_ T_: _ CZD_ _ From normal screen 2,3 __ -ivc • During 1,2 DVD VIDEO playback 1 Press ON SCREEN. I The on-screen display appears _ r (ENTER}) _ I on the TV screen. --2 2 Use CURSORA/v or SUBTITLEto move [_ to [SUBTITLE]. Total number • During playback 1 Press AUDIO.
Advanced operations 2 Use CURSORA/v or AUDIOto move I_ to [AUDIO] for DVD VIDEO) functions for Video CD) _1'°_%: .... I _ You can adjust the picture character according to the type of programming, picture tone or personal preferences. SELECT I_"*_V _.GUS. J 3 Miscellaneous Use CURSOR _/_ selection or AUDIO for audio Each time you press CURSOR _1/1_or AUDIO, the audio changes. See the above examples _, T_ T_,_ _ T_ T_,_ for audio selection.
Advanced GAMMA operations 2 Selectthe desired mode by using 3D PHONIC. Controls the brightness of neutral tints with maintaining the brightness of dark and bright portions. Each time you press the 3D PHONIC button, the 3D PHONIC mode changes as follows: ACTION TI N T Controls the tint of the screen. _' DRAMA COLOR Controls THEATER the color depth of the screen. Y DELAY Controls Selected effect mode OFF the color gap of the screen. 3 Adjust the level of the parameter using CURSOR
Advanced operations While stopped (Elapsed You can choose the time display mode for an Audio CD or Video CD disc in the display on the front panel and in the on-screen display. (Remaining (Total TVf TV2 TV4 TV _3 (Total TV TVO _z '¢JJTI time EACH of the current EACH REMAIN time of the current TOTAL elapsed time TOTAL remaining of the REMAIN time of the track) track) disc) disc) _G _,_ • When you select "EACH REMAIN" while stopped, you can change the track by pressing I_1
This unit can palyback CD-R/RW discs recorded by the MP3 format (we refer to those discs as MP3 discs in this manual). Though available functions with MP3 discs are limited, operations for the available functions are similar to those with Audio CD discs. What Operations is MP3? MP3 is the abbreviation of "MPEG1 Audio Layer 3" MPEG Audio is a compression specification that compresses the audio portion only. This image compression method is used in DVD or Video CD, etc.
MP3 disc playback 4 Press ENTERor _. The unit starts playback from the specified Track. During playback, the bottom row of the display shows something like below. When loading an MP3 disc, after the disc contents are read, the MP3 CONTROL display automatically appears on the TV screen. You can specify the desired Group and Track for playback lTrack1/12 via this display.
MP3 disc playback You can repeat playback of the current track or group. __ _, zw Z_ _ TV_ Z_ dV8 • During playback or while stopped 1 PressREPEAT. Each time you press REPEAT, the repeat mode toggles among all track repeat, current track repeat and off. You can see the selected mode by icons in the display window on the front panel as below. (L_: Repeats the current group on the disc. 01 : No indication: Repeats the current track. The repeat mode is off. • To stop repeat playback Press •.
NOTES Selecting preferences • To returns the normal screen: Press CHOICE. You can set various preferences preference displays. You can bring up a preference the unit is turned off. for playback via two • If you bring up a PREFERENCE display display Q O_T T_ _ playback, and at any time except The "PREFERENCE 1" display handles preferences related to language and display.
Initial settings SUBTITLE Examples • Each time you press CURSOR _, the language setting changes in the following order: • _IP KEY MONITOR Selected language OFF -_ ENGLISH -_ SPANISH -_ FRENCH -_ CHINESE -_ GERMAN -_ ITALIAN -_ JAPANESE -_ language code from AA to ZU (See "Appendix A: Table of languages and their abbreviations" at the end of this manual.) setting in the ON SCREEN LANGUAGE You can select the on-screen display language of the unit.
Initial settings PROGRESSIVE STREAM/PCM MODE You can select the progressive mode from the following options. _E,U_.GUAGE ¢_D I AUBIO (_) I ONSCREENLANGUAGE _ I Mo.rrOR_PE _ I LANGUAGE suB_E 4_D I AUTO The unit recognizes the picture type (film or video source) of the current disc according to the disc information. • • Should be selected when you connect to the digital input of a Dolby Digital decoder, or an amplifier with a built-in Dolby Digital decoder.
Initial settings DOWN MIX SCREEN SAVER To playback a DVD VIDEO disc recorded with surround multichannel _.pw"._'X,o. _ audio correctly, the DOWN SCREEN S*VER 4_ D MIX setting must be properly made according to your audio system. Note that this setting affects only the output signal from the ANALOG AUDIO output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.
Initial settings 4 While [_ points [Set Level], use CURSOR _C) -_..
Initial settings 5 Enter the password using the numeric buttons (0 to 9) and pressENTER. You can change the Parental lock settings [Z_>moves to [EXIT]. The password entered in the above step becomes the new password. If you do not change the password, enter the same password as in the step 2. Even if you want to change only the country code and/or parental level, do not forget to enter the password after changing the country code and/or parental level.
Initial settings When you set the parental level strictly, some discs may not be played back at all. When you insert such a disc and try to play it, the following Parental Lock on-screen display appears on the TV screen, asking you whether you want the parental lock to be temporarily released or not. #_T P_ _L R_N --2 --1 1-2 E -- JVC 1 Use the CURSORA/v to move [_> to [YES], then press ENTER. [;_>moves to the PASSWORD field. When selecting press OPEN/CLOSE to remove 2 [NO], _ .
L=_"Um AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.
Additional information IMPORTANT! You connect the component video output to your TV: • Set the DVD player's AV COMPULINK setting to DVD1. • Make the video/audio connection between the DVD player and your receiver not make the S-VIDEO connection. using the supplied audio/video cable, and do Notes for connection • If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions may not be performed automatically.
Additional information Care and handling of discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the player to malfunction. Label side Do not damage the label side, stick paper to or use any adhesive on its surface. Storage Make sure that discs are kept in their cases.
Additional information Troubleshooting What appears to be a malfunction service. may not always be serious. Symptom Possible Power does not come on. Power plug is not inserted Please go through case securely. Plug in securely. More closer to the unit. The tip of the remote unit is not pointed in Point the infrared light- emitting window the right direction. toward the remote sensor on the front panel. Batteries Replace the batteries with new ones.
Additional information Specifications General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD NTSC, 525i/525p selectable Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): AC120V %,60Hz 15 W (POWER ON), 1.5 W (STANDBY mode) 2.6 kg (5.8 Ibs) 435 mm x 68 mm x 267.5 mm (17-3/16 inch x 2-11/16 inch x 10-9/16 inch) Video outputs COMPONENT (pin jacks): VIDEO OUT (pin jack): S-VIDEO OUT (S jack): Horizontal resolution: Y Output: PB/PR Output: 1.
Additional information Appendix A:Table of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed the desired language, select the abbreviation corresponding the language you want to. 56 as abbreviations.
Additional information Appendix B:Country code list for parental lock This list is used for the parental AD AE Andorra United Arab Emirates AF AG Afghanistan Antigua and Barbuda AI AL AM AN Anguilla Albania Armenia Netherlands AO AQ Angola Antarctica AR AS AT AU Argentina American Austria Australia AW Aruba AZ BA BB Azerbaijan Bosnia and Barbados BD BE BF Bangladesh Belgium Burkina Faso BG BH BI Bulgaria Bahrain Burundi BJ BM BN BO Benin Bermuda Brunei Darussalam Bolivia BR BS BT BV BW
VICTOR COMPANY OF JAPAN, LIMITED _ EN. FR.