Manual

Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT
jacks to your separate audio equipment. (See the following pages.)
The unit
If theTV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See "AV COMPU LINK remote control
system" on page 51 for details.
S-video cable
TV
(not supplied)
J Yellowr_=_zz_ _
] White L_:
Audio/Video cable
(supplied) Red
IN
_ -VIDEO
VIDEO
L3oo,o
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using the S-video cable (optional) in addition to the (standard) video connection.
NOTES
• When connecting to a TV usingthe VIDEO OUT jack, make surethat the PROGRESSIVEindicatoron the front panel isnot lit. If
it is lit, the VIDEO and S-VIDEO outputs do not feed the correctsignals.To turn off the PROGRESSIVEindicator,see "How to
make the Progressivescan mode active" on page 15.
• Connect VIDEO OUT of the unit directly to the video input of your TV.Connecting VIDEO OUT of the unit to a TV via a VCR may
causea monitor problem when playing backa copy-protecteddisc.
14