S500(J).
S500(J).book Page 2 Wednesday, February 13, 2002 9:26 AM Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
S500(J).book Page 1 Wednesday, February 13, 2002 9:26 AM English Table of Contents Introduction Page 2 Supplied accessories..........................................................2 Notes on handling ..............................................................3 Important cautions...................................................................3 Safety precautions ...................................................................3 About discs .......................................................
S500(J).
S500(J).book Page 3 Wednesday, February 13, 2002 9:26 AM Introduction English Notes on handling Important cautions Safety precautions Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5oC and 35oC, 41oF and 95oF). • Leave sufficient distance between the unit and the TV. • Do not use the unit in a place subject to vibrations. Avoid moisture, water and dust Do not place the unit in moist or dusty places.
S500(J).book Page 4 Wednesday, February 13, 2002 9:26 AM Introduction About discs Playable disc types Audio formats Playable and non-playable disc types are as follows: There are some audio formats recorded on discs as shown below. DVD VIDEO SVCD Video CD Audio CD Introduction VIDEO The DVD Logo is a trademark.
S500(J).book Page 5 Wednesday, February 13, 2002 9:26 AM Introduction Care and handling of discs (For DVD VIDEO) How to handle discs A DVD VIDEO disc is comprised of "titles" and each title may be divided into some "chapters". For example, if a DVD VIDEO disc contains some movies, each movie may have its own title number, and each movie may be divided into some chapters. In a DVD VIDEO KARAOKE disc, each song usually has its own title number and does not have chapters.
S500(J).book Page 6 Wednesday, February 13, 2002 9:26 AM Getting started Connections *Before using the unit, you have to connect the unit to a TV and/or amplifier. Before making any connections • Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.
S500(J).book Page 7 Wednesday, February 13, 2002 9:26 AM Getting started Connection to a TV equipped with component jacks English You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables.
S500(J).book Page 8 Wednesday, February 13, 2002 9:26 AM Getting started To make the Progressive scan mode selection active from the remote control unit The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode active.
S500(J).book Page 9 Wednesday, February 13, 2002 9:26 AM Getting started English To connect to digital audio device You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an amplifier, MD, etc. by using an optical or a coaxal digital cable (optional). The digital audio signal from a disc is directly transferred.
S500(J).book Page 10 Wednesday, February 13, 2002 9:26 AM Getting started Using the remote control unit Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV and amplifier/receiver. To install batteries in the remote control unit The battery compartment is located on the back of the remote control unit.
S500(J).book Page 11 Wednesday, February 13, 2002 9:26 AM Getting started To use the remote control unit for TV operation You can operate your TV from the remote control unit. Setting the remote control signal for operating your TV TV TV TV1 TV2 2 3 TV5 TV6 4 5 6 TV7 TV8 TV9 8 9 TV0 MUTING 0 SUBTITLE TV/VIDEO CANCEL ME NU VOL+ ENTER CH OIC E CH - E RE SC ON NEXT PREVIOUS CLEAR . If your TV turns on or off, you have successfully set the control signal.
S500(J).book Page 12 Wednesday, February 13, 2002 9:26 AM Basic operations In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel if available. NOTE TV Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the 5/∞/2/3 and numeric buttons for controlling the unit.
S500(J).book Page 13 Wednesday, February 13, 2002 9:26 AM Basic operations English The initial setup before using the unit We recommend you to set the display language, TV monitor type and digital output before using the unit, depending on circumstances, by following the procedure below. See "Changing the initial settings" on and after page 47 for details about each setting item.
S500(J).book Page 14 Wednesday, February 13, 2002 9:26 AM Basic operations Basic playback This section describes basic operations for playback of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 39 and 42.
S500(J).book Page 15 Wednesday, February 13, 2002 9:26 AM Basic operations English To start playback Available : Press 3. The unit starts playback from the beginning. About screen saver function • A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes.
S500(J).book Page 16 Wednesday, February 13, 2002 9:26 AM Basic operations Resuming playback The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later. There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 52 for details about how to set the resume mode. • When purchasing the unit, the resume mode is initially set to "ON".
S500(J).book Page 17 Wednesday, February 13, 2002 9:26 AM Basic operations English To resume playback Available : When the resume mode is set to "DISC RESUME" ¶ While stopped, or no disc is inserted 1 Press 0 OPEN/CLOSE to insert a disc whose interrupted position is memorized. After loading the disc, the display window on the front panel shows "----RESUME." If a disc for which you want to resume playback is already set in the disc tray, you need not to follow the step 1. 2 Press 3.
S500(J).book Page 18 Wednesday, February 13, 2002 9:26 AM Basic operations Variable speed playback You can play back slowly or fast, or advance a picture frame by frame.
S500(J).book Page 19 Wednesday, February 13, 2002 9:26 AM Basic operations English To locate the beginning of the scene or song You can locate the desired title or chapter (for DVD VIDEO), or track (for Audio CD/Video CD/SVCD) from which the unit starts playback.
S500(J).book Page 20 Wednesday, February 13, 2002 9:26 AM Basic operations NOTES • You can also specify the desired title during DVD VIDEO playback. See page 23 for details. • During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the menu. • When appears on the TV screen: The title, chapter or track you have selected is not contained in the disc.
S500(J).book Page 21 Wednesday, February 13, 2002 9:26 AM Basic operations The indication on the rightmost of the status bar shows the unit's transport status as follows: Icon English Status Appears in the playback mode. Appears in the stop mode. Appears in the pause mode. Appears in the fast forward/backward playback mode. Appears in the slow-motion playback mode. Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access various functions.
S500(J).book Page 22 Wednesday, February 13, 2002 9:26 AM Advanced operations This chapter describes operations for various advanced functions of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 39 and 42. 2 Use 5/∞/2/3 to select a desired item, then press ENTER. The unit starts playback of the selected item.
S500(J).book Page 23 Wednesday, February 13, 2002 9:26 AM Advanced operations 2 Use the numeric buttons to select the desired 2 Use the numeric buttons to specify a title to be item. played. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button.
S500(J).book Page 24 Wednesday, February 13, 2002 9:26 AM Advanced operations 3 Use the numeric buttons (0 to 10) to enter the desired time. The specified time is displayed in the pull-down menu. • When you correct a mistake Use 2 repeatedly to move back to the digit where you entered a undesired numeral (the leftmost "-" digit), and reenter the correct time. (Example for changing "2:35:__" to "2:34:__".) TIME 2 : 3 5 : _ _ • "10" button works as "0" and "+10" button is not used with this function.
S500(J).book Page 25 Wednesday, February 13, 2002 9:26 AM Advanced operations Depending on the disc type and whether the disc is being played back or not, the contents shown on the TV screen differ.
S500(J).book Page 26 Wednesday, February 13, 2002 9:26 AM Advanced operations 4 Specify tracks in the desired order using the numeric buttons. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: +10 → 3 To select 34: +10 → +10 → +10 → 4 To select 40: +10 → +10 → +10 → 10 Up to 99 tracks can be programmed. You may select the same track more than once.
S500(J).book Page 27 Wednesday, February 13, 2002 9:26 AM Advanced operations The unit starts random playback. With a Video CD/SVCD disc, the menu bar is automatically dismissed. While random playback, the RANDOM indicator lights in the display window on the front panel. After playing all tracks of the disc, the unit stops the disc and quits the random mode.
S500(J).book Page 28 Wednesday, February 13, 2002 9:26 AM Advanced operations • Audio CD/Video CD/SVCD NOTES • You can also select the repeat mode via the menu bar. See pages 36 and 37. (Screen example for Audio CD) TRACK 33 • When the program playback mode is active with an Audio CD, Video CD or SVCD, the repeat mode changes in the same manner. Note that, however, in the " " mode the unit repeats all the programmed tracks, instead of all tracks on the disc.
S500(J).book Page 29 Wednesday, February 13, 2002 9:26 AM Advanced operations Changing the language, sound and scene angle With some DVD VIDEO discs, you can choose a desired subtitle language and/or audio language/sound, as well as a desired camera angle. Similarly, you can choose a desired audio channel (or channel combination) of a Video CD/SVCD disc, as well as a subtitle channel of an SVCD disc. 2 Use 5/∞ or SUBTITLE to select the subtitle.
S500(J).book Page 30 Wednesday, February 13, 2002 9:26 AM Advanced operations To change the audio language or sound [AUDIO] • For Video CD/SVCD Each time you press 5/∞ or AUDIO, the playback audio changes as follows. (for Video CD) ST (stereo) Available : By audio selection, you can choose the audio language of movies or enjoy KARAOKE with or without the vocal.
S500(J).book Page 31 Wednesday, February 13, 2002 9:26 AM Advanced operations To select a scene angle of DVD VIDEO [ANGLE] Available : You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. 3 Press ENTER. English You can see the picture from the selected angle. The angle selection window is dismissed.
S500(J).book Page 32 Wednesday, February 13, 2002 9:26 AM Advanced operations Special picture playback and picture/sound effect To zoom in/out pictures [ZOOM] Available : You can see continuous still pictures or zoom in (or out) the picture. You can also adjust the picture character, as well as simulate surround sound using a stereo system.
S500(J).book Page 33 Wednesday, February 13, 2002 9:26 AM Advanced operations To adjust the picture character [VFP] Available : The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences.
S500(J).book Page 34 Wednesday, February 13, 2002 9:26 AM Advanced operations 3 Press 5/∞ to adjust the effect level. To simulate surround sound [3D PHONIC] You can select the effect level among "1" through "5". The higher value enhances the effect. Available : Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system. ACTION TV TV TV1 DVD TV2 2 3 TV5 TV6 4 5 6 TV7 TV8 TV9 7 8 TV-/-- MUTING 0 SUBTITLE .
S500(J).book Page 35 Wednesday, February 13, 2002 9:26 AM Advanced operations This section describes the functions you can perform via the menu bar. The available menu bar functions differ depending on the disc type.
S500(J).book Page 36 Wednesday, February 13, 2002 9:26 AM Advanced operations Menu bar functions for DVD VIDEO TITLE 33 CHAP 33 8.5Mbps OFF 1 2 CHAP. 3 4 1/3 5 TOTAL 1:25:58 1/5 6 1/3 7 Selected Icon 1 Time mode selection (During playback only) Selects the time mode shown in the display window on the front panel and in the status bar. 2 Repeat mode (During playback only) Select the repeat mode. Menu icons The following table shows the menu bar functions available for DVD VIDEO.
S500(J).book Page 37 Wednesday, February 13, 2002 9:26 AM Advanced operations Selected Icon Operation Note English 1 Press ENTER to open the pull-down window. 2 Use 5/∞ to select a scene angle. Example: 7 Angle selection (during playback only) 1/3 j 2/3 j 3/3 Selects a desired scene angle in the multi-angle part. 3 Press ENTER to playback with the selected scene angle. (See page 31 for details about angle selection.) Menu bar functions for Audio CD/Video CD/SVCD TRACK 33 2 1 3 PROG. RND.
S500(J).book Page 38 Wednesday, February 13, 2002 9:26 AM Advanced operations Selected Icon 5 RND. Random (While stopped only) Operation 1 Press ENTER to activate random playback. (See page 26 for details.) Activates random playback. 6 Audio selection (During Video CD/SVCD playback only) Selects the audio channel(s). 7 Subtitle selection (During SVCD playback only) Advanced operations Selects the subtitle. 38 1 Press ENTER to open the pull-down window.
S500(J).book Page 39 Wednesday, February 13, 2002 9:26 AM MP3 disc playback The unit can play back MP3 files on a private CD-R/RW disc or commercial CD. We refer to a disc that contains MP3 file as an "MP3 disc" in this manual. Though available functions with MP3 discs are limited, operations for the available functions are similar to those with Audio CD discs.
S500(J).book Page 40 Wednesday, February 13, 2002 9:26 AM MP3 disc playback 2 Move the bar to a desired Group using 5/∞. NOTES • The current Group and Track number are shown on the display window in the following manner. LPCM VCDVD GROUP TITLE TRACK CHAP MPEG 3 8 DOLBY PROGRAM DIGITAL RANDOM DTS Current Group number 1 A-B On the right column, Tracks in the selected Group are shown. When selecting a Group, Track 1 is initially selected (highlighted).
S500(J).book Page 41 Wednesday, February 13, 2002 9:26 AM MP3 disc playback Direct selection English Repeat playback English Available : Available : You can select a desired Group directly by specifying the Group number. English You can repeat playback of the current Track, current Group or all MP3 files on the disc.
S500(J).book Page 42 Wednesday, February 13, 2002 9:26 AM JPEG disc playback The unit can play back JPEG files on a private CD-R/RW disc. We refer to a disc that contains JPEG files as a "JPEG disc" in this manual. Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either type selected by the MP3/JPEG setting in the PICTURE preference display (See page 50).
S500(J).book Page 43 Wednesday, February 13, 2002 9:26 AM JPEG disc playback 3 Select a desired file using 4/¢. 4 Press ENTER. Basic operations English English The selected file (still picture) is shown on the TV. In the display window, you can see the current Group and file numbers. To see a desired picture Available : JPEG When loading a JPEG disc, after the disc contents are read, the JPEG CONTROL display automatically appears on the TV screen.
S500(J).book Page 44 Wednesday, February 13, 2002 9:26 AM JPEG disc playback To zoom in/out the picture [ZOOM] Available : 4 5 6 TV7 TV8 TV9 7 8 TV-/-- T OP 9 TV0 10 MUTING 0 RETURN SUBTITLE +10 TITLE/ GROUP TV/VIDEO CANCEL NU CH ME + ME NU VOL- VOL+ ENTER CH OIC E PREVIOUS CLEAR 5/∞/2/3 EN RE SC ON NEXT CH - SELECT You can see files (still pictures) one after another automatically in the slide show mode.
S500(J).book Page 45 Wednesday, February 13, 2002 9:26 AM JPEG disc playback Direct selection Selecting the start point of the slide show Available : TV English "--" is shown in the Group display area of the display window. (Example for the indication of display window) DVD TV2 TV3 1 2 3 TV4 TV5 TV6 4 5 6 TV7 TV8 TV9 7 8 9 TV-/-- TV0 MUTING 10 0 +10 RETURN T JPEG DVD TV TV1 OP English 1 Press TITLE/GROUP.
S500(J).book Page 46 Wednesday, February 13, 2002 9:26 AM JPEG disc playback • To stop repeat playback Press 7. Note that the repeat mode remains. Repeat function Available : JPEG In the slide-show mode, you can repeat playback of JPEG files in a Group or on the disc.
S500(J).book Page 47 Wednesday, February 13, 2002 9:26 AM Changing the initial settings TV English How to set preferences NOTE Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the 5/∞/2/3 and numeric buttons for controlling the unit. DVD TV TV TV1 Selecting preferences About the Preference display The preference display consists of the LANGUAGE, PICTURE, AUDIO, and OTHERS setting displays, each having setting items.
S500(J).book Page 48 Wednesday, February 13, 2002 9:26 AM Changing the initial settings LANGUAGE page This page allows you to select languages concerning with DVD VIDEO disc playback, as well as the on-screen display language of the unit. LANGUAGE MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH NOTES • During playback, you can bring up any page of the preference displays, however, only "ON SCREEN LANGUAGE" can be set on the "LANGUAGE" page.
S500(J).book Page 49 Wednesday, February 13, 2002 9:26 AM Changing the initial settings English PICTURE page PICTURE MONITOR TYPE 4:3 L.B. PROGRESSIVE MODE AUTO SCREEN SAVER ON MP3/JPEG MP3 SELECT ENTER This page allows you to select desired options concerning with a picture or monitor screen. USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE.
S500(J).book Page 50 Wednesday, February 13, 2002 9:26 AM Changing the initial settings Menu item Setting options Notes/examples SCREEN SAVER • ON You can select the screen saver The current picture gets dark. function ON or OFF. See page 15 for details about screen • OFF The screen saver function is off. saver function.
S500(J).book Page 51 Wednesday, February 13, 2002 9:26 AM Changing the initial settings Setting options Notes/examples ANALOG DOWN MIX To playback a DVD VIDEO disc recorded with surround multichannel audio correctly, this setting must be properly made according to your audio system. • DOLBY SURROUND • This function does not work when the 3D PHONIC function is activated. Should be selected when you enjoy (See page 34.
S500(J).book Page 52 Wednesday, February 13, 2002 9:26 AM Changing the initial settings OTHERS page This page allows you to select desired options concerning with the system. OTHERS RESUME ON ON SCREEN GUIDE ON AUTO STANDBY OFF AV COMPULINK MODE DVD1 PARENTAL LOCK SELECT ENTER USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. Menu item Setting options Notes/examples • See page 17 for details about RESUME • ON resume playback function.
S500(J).book Page 53 Wednesday, February 13, 2002 9:26 AM Changing the initial settings This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes.
S500(J).book Page 54 Wednesday, February 13, 2002 9:26 AM Changing the initial settings 5 While points [LEVEL], press ENTER to bring up the pull-down menu. In the pull-down menu, “NONE” and level "1" through "8" are available. "NONE" does not restrict playback. Level "1" is the strictest level. Discs rated higher than the selected level are restricted. To change the settings [PARENTAL LOCK] Available : You can change the Parental Lock settings later.
S500(J).book Page 55 Wednesday, February 13, 2002 9:26 AM Changing the initial settings 3 To change the "COUNTORY CODE" or "LEVEL", press ENTER to bring up the associated pull-down menu while points the appropriate item. To select the item to be set, use 5/∞ when no pulldown menu is shown. 4 Use 5/∞ to select a desired option and press ENTER. Note that if you change the country code, you must reselect the Parental Lock level.
S500(J).book Page 56 Wednesday, February 13, 2002 9:26 AM Additional information Names of parts and controls Refer to the corresponding pages indicated in () for details.
S500(J).
ADDITIONAL_INFORMATION.fm Page 58 Wednesday, February 13, 2002 11:07 AM Additional information AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.
S500(J).book Page 59 Wednesday, February 13, 2002 9:26 AM Additional information English Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. POWER Symptom Power does not come on. Possible cause Power plug is not inserted securely. Remedy Plug in securely. OPERATION Symptom The remote control unit does not work. Possible cause Remedy Too far from the unit. More closer to the unit.
S500(J).book Page 60 Wednesday, February 13, 2002 9:26 AM Additional information PICTURE Symptom No picture is displayed on the monitor. Possible cause Remedy Connection of video cable is incorrect. Connect the cable correctly. Input selection of TV is incorrect. Select correctly. Disc is not playable. Use a playable disc. (See page 4.) No picture is displayed on the monitor or the screen is blurred or divided into two parts. The unit is in the progressive scan mode (i.e.
S500(J).book Page 61 Wednesday, February 13, 2002 9:26 AM Additional information English Frequently Asked Questions Answer Ref. page You can play back the DVD VIDEO discs with the Region Code (local code) containing 'ALL' or '1' recorded in the NTSC or PAL system (PAL disc signals are reproduced by converting to the NTSC system). You can also play back the Video CD discs recorded in the NTSC system. Please check the information on each disc jacket.
S500(J).book Page 62 Wednesday, February 13, 2002 9:26 AM Additional information Specifications *Specifications and appearance subject to change without prior notice. General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD, SVCD NTSC, 480i (Interlaced scan)/480p (Progressive scan) selectable Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): AC 120 V , 60 Hz* 14 W (POWER ON), 1.3 W (STANDBY mode) 2.6 kg (5.8 lbs) 435 mm x 68 mm x 267.
S500(J).
S500(J).book Page 64 Wednesday, February 13, 2002 9:26 AM Additional information Appendix B: Glossary 480i/480p Indicates the number of scan lines and scanning format of an image signal. 480i indicates 480 scanning lines with interlace format, and 480p indicates 480 scanning lines with progressive format. Aspect ratio A ratio which defines the shape of the rectangular picture in a TV. It is the width of the picture relative to the height. The conventional TV picture is 4:3 in aspect ratio.
S500(J).book Page 65 Wednesday, February 13, 2002 9:26 AM Additional information Letter box A type of picture playback with the normal (4:3) TV screen. Black bars are shown at the top and bottom of the image to allow playing of wide-screen (16:9) DVD movie without cutting off any sides of the image on a 4:3 TV. Linear PCM audio Stands for "pulse code modulation". Linear PCM is the usual digital method without compression, used for audio playback of DVD Video discs, Audio CD discs, etc.
S500(J).book Page 66 Wednesday, February 13, 2002 9:26 AM Additional information Appendix C: Index Numerics 3D PHONIC ...................................................................... 34, 51 480i ............................................................................ 6, 7, 60, 62 480p .................................................................................... 7, 62 A A-B repeat .................................................................. 28, 36, 37 Angle .........................
S500(J).book Page 69 Wednesday, February 13, 2002 9:26 AM Authorized Service Centers ® QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.
S500(J).book Page 70 Wednesday, February 13, 2002 9:26 AM LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
S500(J).book Page 71 Wednesday, February 13, 2002 9:26 AM VICTOR COMPANY OF JAPAN, LIMITED EN.