Installation Manual

Congratulations, you have purchased the finest air filter that money can buy. With proper care, this fil-
ter will last 1 million miles or more. This filter is a direct replacement for the stock air filter, and no
modifications will be required. However the following procedure MUST be followed to ensure a
proper fit and seal of the K&N Air Filter.
We recommend completely removing the lid from the airbox to facilitate proper installation. Your K&N Air Filter fits snugly
and therefore should be installed in the lid first.
INSTALLATION
1. Disconnect all hoses and release all clips, then completely remove the lid from the vehicle.
2. Install the K&N Air Filter in the lid. Refer to illustration below.
3. Position the lid and filter squarely over the airbox and secure it with the spring clips.
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS
SERVICED, OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE
ENGINE COULD RESULT.
• 1455 CITRUS St., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-826-4001 • FAX [phone]
• e-mail: [e-mail] • WWW: http://www.knfilters.com
17955c
03/08/08
FILTER
AIRBOX
LID
INSTALLATION INSTRUCTIONS
Part Number 33-2046
This filter fits: See current K&N catalog for complete listing
*FREE K&N DECAL To register your warranty, please see us online at knfilters.com/register. FREE K&N DECAL*