User manual

14
Operation
Insert the plug into the wall socket. Turn the
thermostat knob (E), clockwise, beyond the «O»
(STOP) position.The pilot light (D) will light up,
indicating that the appliance is powered. The
warning light (C) will light up, indicating that the
temperature inside the appliance is to high.
To stop operation, simply turn the thermostat knob to
position «O».
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob toward
lower settings or reduced (colder) rotating the knob
towards higher settings.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
refrigerator depends on:
• room temperature;
• how often the door is opened;
• the quantity of food stored;
• location of appliance.
A medium setting is generally the most suitable.
Control Panel
A. Normal/Super push button
B. Super control light
C. Warning light
D. Pilot light
E. Thermostat knob
Quick-freezing
For quick-freezing, push the button (A). The super
control light (D) will then light up.
Warning light (C)
The temperature alarm light turns on automatically
whenever the temperature within the freezer rises
above a certain value which might endanger
satisfactory long-term conservation.
It is perfectly normal for the temperature alarm light
to remain lit up for a short time after the freezer is
initially turned on. It will remain lit up until the
optimum temperature for the conservation of frozen
food is attained.
Freezing fresh food
The 4-star compartment is suitable for long term
storage of commercially frozen food and for freezing
fresh food.
To freeze fresh foods allow it to run on the fast
freeze setting for at least 24 hours before loading
food.
Place the food to be frozen in the compartments as
shown in figure.
D670
9 Kg
7 Kg
1
2
3
4
5
6
ABCD E
19
The following installation steps are illustrated only when the door is hinged on the left, please carry out the
following installation steps on the opposite side as appropriate.
Performing adjustments
Cut joint cover fillets
Apply joint cover fillets
Fit ventilation grill and push appliance into
place