User manual

10
PR167
Ha
8mm
K
9. Remove the squares and mark a distance of
8 mm from the outer edge of the door where the
nail must be fitted (K).
10. Place the small square on the guide again and fix
it with the screws supplied.
Should the alignment of the furniture door be
necessary, use the clearance of slots.
At the end of this procedure, it is necessary to
check if the door of the furniture closes properly.
PR168
Hb
11. Fix cover (Hd) on the small square (Hb) until it
clips into place.
PR167/1
Hd
Hb