User manual

3. Open the door and push the appliance against the

side of kitchen furniture opposite to that of the

appliance hinges. Fasten the appliance with 4

screws (I) provided in the kit included with the

appliance.

5. Separate parts Ha, Hb, Hc, Hd as shown in the

figure.

4. Snap vent grill (B) and hinge cover (E) into

position.

Apply blanking covers (C-D) as indicated.

PR266

6. Place guide (Ha) on the inside part of the furniture

door, up and down as shown in the figure and

mark the position of external holes. After having

drilled holes, fix the guide with the screws

supplied.

21 m

ca. 50 mm

90°

ca. 50 mm

PR167

8mm

8. Open the appliance door and the furniture door at

90¡. Insert the small square (Hb) into guide (Ha).

Put together the appliance door and the furniture

door and mark the holes as indicated in the figure.

7. Fix cover (Hc) on guide (Ha) until it clips into

place.

PR33