Data Sheet

PRBMD0x power consumption test result
The following is are power consumption testing result of PRBMD0x under different
conditions. !
PRBMD02 DATASHEET 1.10
K-SOLUTION
38
testing condition
model
PRBMD00
PRBMD02
3.3V+0dbm+16M+RC32K+sleep
EVK
with DCDC
without DCDC
with DCDC
with SDK
2.1.0
3.1.1
3.1.1
time(ms)
power（uA）
power（uA）
power（uA）
advertising
100
202.67
338
190
500
46.33
80
55
1000
27
40
29
1500
21.67
31
24
2000
19
25
20
connected
100
118
223
120
200
61
/
/
300
50
/
/
400
37
/
/
500
30.33
60
35
1000
/
40
24
1500
/
33
21
2000
/
32
19
Typical sleep mode (Advertisement off, a
RAM block + a SRAM block + CPU auto
wakeup periodically)
7.73uA
10uA
10uA
standby mode （Advertisement ON and one
block of SRAM）
/
3uA
3uA
off mode（only Advertisement ON）
1.37uA
1uA
1uA
Tx system peak current(including CPU)
8.07mA
10mA
6.7mA
Rx system peak current (including CPU)
7.43mA
9.8mA
5.1mA
Note:
Typical sleep mode
The CPU and most peripherals go to sleep. Support 32KHZ RTC/
IO/interrupt/event wake-up, this mode is controlled by the
OS itself, and the application does not need to intervene
standby mode
Except for Advertisement is ON and 1 RAM area memory
retention, the CPU and other peripherals all go to sleep.
Only the RAM0 area contents are maintained. Only supports IO
wake-up
off mode
Except for Advertisement is ON, the CPU and other
peripherals go to sleep. After waking up, it is equivalent
to a system restart. Only supports IO wake-up
SRAM
Each sram consumes about 2uA, 5 blocks for PRBMD00, 3 blocks
for PRBMD02