Data Sheet

PRBMD02 DATASHEET 1.10
K-SOLUTION
9
Description
Typical
Radio current
consumption
Tx only at 0dBm, with internal DC-DC@3V
typ. 4.6mA
Rx only, with internal DC-DC@3V
typ. 4mA
Transmitter
RF max output power
10dBm
RF min output power
-20dBm
OBW for BLE, 1Mbps, 20dB occupy-bandwidth for BLE modulation 1Mbps
1100KHz
OBW for BLE, 2Mbps, 20dB occupy-bandwidth for BLE modulation 2Mbps
2300KHz
OBW for GFSK, 500Kbps, 20dB occupy-bandwidth for GFSK modulation 2Mbps
1100KHz
OBW for GFSK, 125bps, 20dB occupy-bandwidth for GFSK modulation 2Mbps
1100KHz
Receiver
BLE 1Mbps
GFSK RX
Rx sensitivity,
1Mbps BLE ideal transmitter, 37 Byte BER=1E-3
-99dBm
co-channel rejection， modulated interferer in channel, 37 Byte BER=1E-3
-6I/C dB
Selectivity +-1MH ,
Wanted signal at -67dBm, modulated interferer at +/- 1MHz, 37 Byte BER=1E-3
7 I/C dB
Selectivity +-2MHz
Wanted signal at -67dBm, modulated interferer at 45 +/- 2MHz, 37 Byte BER=1E-3
45 I/C dB
Selectivity +-3MHz
Wanted signal at -67dBm, modulated interferer at +/- 3MHz, 37 Byte BER=1E-3
50 I/C dB
Selectivity +-4MHz
Wanted signal at -67dBm, modulated interferer at 50 +/- 4MHz, 37 Byte BER=1E-3
50 I/C dB
Selectivity +-5MHz or more
Wanted signal at -67dBm, modulated interferer at >=+/- 5MHz, 37 Byte BER=1E-3
55 I/C dB
Selectivity Imag frequency
Wanted signal at -67dBm, modulated interferer at image frequency, 37 Byte BER=1E-3
22 I/C dB
Intermodulation
Wanted signal at 2402MHz, -64dBm, Two interferers at 2405 and 2408 MHz respectively, at the
given power level, 37 Byte BER=1E-3
-20dBm
Carrier Frequency Offset Tolerance
+- 350KHz
Sample Clock Offset Tolerance
+-120ppm