Use and Care Manual
The appliance shall not be exhausted into a chimney, a wall, a ceng, an attic, a crawl space, or a
concealed space of a building
Only rigid or flexible metal duct shall be used for exhausting
In Canada, that only those foil-type flexible ducts, if any, speccally identified for use with the
appliance by the manufacturer shall be used. In the United States, that only those foil-type flexible
ducts, if any, specifically identified for use with the appliance by the manufacturer and that comply
with the outline for Clothes Dryer Transition Duct, Subject 2158A, shall be used.
In Canada, that the exhaust duct shall be 102 mm in diameter. In the United States, the required
exhaust duct diameter.
That the total length of flexible metal duct shall not exceed 8 feet.
That the duct shall not assembled with screws or other fastening means that extend into the duct
and catch lint
10