User's Manual

USK CCG 3 - 071215

BEFORE FIRST USE

• When you use your appliance for the first time, pour fresh water

into the water tank (without coffee), press the BREW button and

switch on the appliance.

• Once all the water has passed through, switch off the appliance

and let it cool down. When it is cold enough repeat the process 3

times with fresh water.

HOW TO MAKE COFFEE?

• Open the lid of the water tank and fill the water tank with cold

water. Close the lid.

• Pull the filter holder out using its handle, fill the permanent filter

with the desired quantity of ground coffee or use the grinder (see

“USING THE COFFEE GRINDER” section). Then replace the filter

holder in its initial position.

• Make sure the jug is placed correctly on the base.

• To switch on your appliance, press once the 0/1 switch at the

back of the appliance.

• When you remove the jug from the appliance, a non-drip valve

will automatically operate to stop any drops of coffee dripping

onto the base. Replacement of the jug automatically opens the

non-drip valve and allows remaining coffee to filter through into

the jug.

• Once the water tank is empty, we advise you to wait until the

brewing process is finished and the filter has run empty before

removing the jug.

• You can switch off your appliance anytime simply by pressing the

0/1 switch until all pilot lights are off.

USING THE COFFEE GRINDER

• Install the fineness knob on the machine. The knob has been

adjusted correctly to get the ideal result.

• Open the coffee bean container and add the right amount of

coffee beans.