- Team International Group Refrigerator User Manual

6 USK WCL 2 - 071211
possibility of malfunctions in the cooling system due to transport
handling.
• Before use, clean the appliance thoroughly, especially in the
interior (See Cleaning and Maintenance).
• In case the interior accessories are not correctly placed,
rearrange them properly.
• Make sure that your mains voltage corresponds to that stated on
the appliance.
• Stand the appliance on a stable surface near a power socket.
• Plug in the appliance to an earthed wall outlet.
Temperature control and display
The upper zone of the appliance is for storage of white wine with
temperature from 45°F to 54°F (7°C to 12°C) The lower zone is for
storage of red wine with temperature range from 54°F to 65°F (12°C
to 18°C).
The temperature range of the wine cooler is intended for 45°F to 65°F
(7°C to 18°C).
Average temperature for red wine is 54°F to 65°F (12°C to 18°C).
Average temperature for white wine is 45°F to 54°F (7°C to 12°C).
The display usually shows the average temperature of the appliance
at that moment.
Manual temperature setting
The temp-adj button is set on one certain point when the cellar is off
the assembling line. When you want to change the temperature in
the cabinet, please select the right zone and change accordingly.
The temperature of the wine cooler can be set anywhere between
45°F to 65°F (7°C to 18°C) by the temperature up “△”and
temperature down “▽”pads as follows:
1) There are four buttons on the panel: on the left, push “Temp △” to
increase the temperature or push “Temp ▽” to decrease the