Instructions / Assembly

25 ASSEMBLY 26
ASSEMBLY
3 Set the Cast Iron
Fire Grate on top of
the base. Note: the
ribbed side of the
fire grate should
face downward.
2 Place the base
of the FireBox over
the Slide-Out Ash
Drawer aligning
the opening of the
base with the ash
drawer handle.
1 Open the dome
and place the Slide-
Out Ash Drawer
in the bottom of
the grill so handle
aligns with lower
vent opening.
Internal Assembly
The latest innovation to the internal architecture of your
Kamado Joe is our new AMP FireBox. Together with the Divide
& Conquer
®
Flexible Cooking System and Slide-Out Ash
Drawer, they create the perfect internal conditions needed for
more functional, flavorful results. Building a better grill starts
with a few easy steps and the parts below.
ASSEMBLY
Fully Assembled Grill
4 Begin building the
FireBox Walls. Place
each piece on top of the
FireBox Base. Note: the
pieces will lean against
the inner wall of the
base of the grill.
5 Using the hole
in each piece, pull
towards the center to
fit under the outer rim
of the Stainless Steel
Ring. Repeat step
for each piece until
FireBox is secure.
6 Place the Divide
& Conquer
®
on top
of the Stainless Steel
Ring. Note: the flexible
cooking system rack
should fit on the
indents of the ring.
PARTS
FireBox Base x1
Slide-Out Ash
Drawer x1
FireBox Walls x5
(x6 if Big Joe)
Divide & Conquer
®
x1
Cast Iron Fire Grate x1
Stainless Steel Ring x1