User's Manual

MOD190 TRANSCEIVER
4
INSTALLATION
1) Solder the MOD190
transceiver directly to the
host’s compatible connector.
2) Print and attach the label
as shown below:
3) Place a label on the outside
of the host enclosure in a
visible area. On the label,
include the following:
“Contains Transmitter
Module FCC ID: P4U-
MOD190” and “Contains
Transmitter Module IC:
4534A-MOD190”
4) Connect the appropriate
antenna. Either a ¼
wavelength wire, or a
RPSMA ¼ wavelength
antenna.