User's Manual

MOD190 TRANSCEIVER
5
Application Requirements:
A) Power the MOD190
Transceiver with 3.3VDC
nominal voltage, with
peak current draw of
750mA.
B) Do not remove the shield
on the MOD190.
C) If you use something other
than the ¼ wave
antenna or the wire
antenna, the unit needs
separate approval.
D) The antenna should be
mounted at least 20cm
from all persons, and
must not transmit
simultaneously with any
other antenna or
transmitter, except in
accordance with FCC
multi transmitter product
procedures.
E) The MOD190 is to be
installed only in mobile
applications. See Part
2.1091 for definitions of
mobile and fixed
applications.
F) Do not operate the
MOD190 without an
antenna.
G) Documentations: In the
host’s User Manual
include the following:
a. That there are no user
serviceable parts in
the radio modules.
They should not
remove or install radio
modules.
b. The “Instructions To
The User” section.
c. The “Industry Canada
Statement”.
d. Include in the manual,
“This device is granted
for use in Mobile only
configurations in
which the antennas
used for this