Operating instructions

QUICKSTART
5.965-264.0 11/14
2
A B C Empty wastewater container
A If the dirt water reservoir is full, switch
off the suction and spray switches.
B Remove the lid.
C Remove the wastewater container
from the appliance and drain it.
3
A B
D
C Empty the fresh water reservoir
A Turn off the appliance.
B Shortly activate the lever on bender to
decrease the pressure.
C Separate bender from the spray/suction
hose.
Insert the suction hose into the fresh water
reservoir.
D Press the suction switch to turn on the
suction turbine.
4
A B C After each operation
A Flush appliance.
B Empty the wastewater container and
clean it under running water.
C Empty the fresh water reservoir.
Suck the remaining fresh water out
of the tank.
D Clean the outside of the appliance with a
damp cloth.
E Remove all water from the appliance
prior to longer periods of non-use to
avoid offensive odours.
F Allow appliance to dry thoroughly:
Remove or move lid sideways.
6
A Transport
A For transport, place suction pipe on the
carrying handle and place the spray/suction
hose on top of the appliance.
Wind up the mains cable and hook it into the
cable hook.
Finish operation