Use and Care Manual

– 2
1 Electrodes
2 Suction hose
3 Cable hook
4 Air outlet, working air
5 Suction head lock
6 Air inlet, motor cooling air
7 Suction head
8 Steering roller
9 Dirt receptacle
10 Suction support
11 Floor nozzle
12 Suction tube
13 Carrying handle
14 Filter cover
15 Bender
16 Rotary switch for suction output (min-
max)
17 Indicator lamp
18 Socket
19 Automatic filter dedusting
20 Main switch
21 Flat fold filter
22 Filter dedusting
23 Floor nozzle holder
24 Holder for crevice nozzle
25 Holder for suction pipes
26 Power cord
27 Nameplate
몇 WARNING
Once this vacuum is used for EPA Lead
Based Paint Renovation, Repair and Paint-
ing Program (RRP) where lead may be pre-
sent, it is recommended that it always be
used for RRP. Residual hazardous sub-
stances in the vacuum may cause health
and environmental hazards.
몇 WARNING
When using this vacuum for EPA Lead
Based Paint Renovation, Repair and Paint-
ing Program (RRP), this vacuum is not rec-
ommended for vacuuming carpets and
rugs. Vacuum may not be able to complete-
ly remove all hazardous substance may
cause health and environmental hazards.
몇 WARNING
Not suitable to vacuum hazardous or toxic
substances or dusts e.g. asbestos. Neither
the standard filter or the optional HEPA fil-
ter is able to capture all hazardous particles
and may cause health hazards.
ATTENTION
The flat pleated filter must always be in
place while vacuuming.
Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.
– To vacuum up fine dust, a fleece filter
bag or a membrane filter (special ac-
cessory) can additionally be used.
Illustration
 Release and remove the suction head.
 Install a fleece filter bag or a membrane
filter (option).
 Insert and lock the suction head.
ATTENTION
Please note the following when switch-
ing from wet to dry vacuum cleaning:
If you vacuum dry dust while the filter ele-
ment is still wet the filter will become ob-
structed and may be damaged beyond re-
pair.
 Dry the wet filter properly before use or
replace it with a dry one.
 Change the filter, if required, according
to instructions under the section "Main-
tenance and Care".
Note: For permanent wet vacuum cleaning
it is advisable to use a PES flat pleated filter
(see filter systems).
Device elements
Start up
Anti-static system
Dry vacuum cleaning
Install fleece filter bag
Changeover from wet to dry vacuum
cleaning
9EN