Operating instructions

6 English
Accessories and spare parts
Only use original accessories and original
spare parts. They ensure that the appliance
will run fault-free and safely.
Information on accessories and spare parts
can be found at www.kaercher.com.
Safety instructions
Hazard levels
 DANGER
● Indication of an imminent threat of danger
that will lead to severe injuries or even
death.
몇 WARNING
● Indication of a potentially dangerous situ-
ation that may lead to severe injuries or
even death.
몇 CAUTION
● Indication of a potentially dangerous situ-
ation that may lead to minor injuries.
ATTENTION
● Indication of a potentially dangerous situ-
ation that may lead to damage to proper-
ty.
General
To avoid danger to persons, animals and
property, it is imperative to read and ob-
serve the following documents before oper-
ating the device:
● Operating instructions
● All safety instructions
● The respectively applicable national reg-
ulations
In self-service operation, the operator must
ensure that the users are informed by
means of clearly visible information notic-
es:
● Potential dangers
● Safety devices
● Operating the device.
Operation
몇 WARNING
● Children over the age of 8 and persons
with reduced physical, sensory or mental
capabilities, or those with a lack of expe-
rience and knowledge, are only allowed
to use the appliance if they are properly
supervised, have been instructed with re-
spect to using the appliance safely by a
person responsible for their safety, and
understand the resultant dangers in-
volved.
● Children must not play with the appliance.
● Cleaning and user maintenance may not
be carried out by unsupervised children.
● Always keep the area around the device
clean and free of oil and grease.
Behaviour in the event of an
emergency
1. In the event of an emergency, push the
STOP button.
1 "STOP" button
Symbols on the device
DANGER
Danger of injury from electrical
voltage.
Do not open any covers that are marked in
this way.
몇WARNING
Risk of burns from hot surface.
Do not touch any components with
this symbol.
Intended use
This device has 2 functions.
● Regulating vehicle tyre pressures by in-
creasing or decreasing pressure.
● Dispensing water that is not suitable as
drinking water.
Operation in explosive atmospheres is pro-
hibited.
During operation, the door must be closed
and the cover must be attached.
This device is suitable for commercial use.
Calibration requirement
The tyre inflation system of the AWT -C and
AWT -C Fp device versions is calibrated
and must be checked by the responsible
gauging office after installation and then
every 2 years.
Initial startup
1. Open the on-board water inlet.
2. Switch on the on-board power supply.
3. Open locks.
1 Main switch
2 Door
3 Lock
4. Set the main switch to "ON" position.
The “STOP” button flashes when the de-
vice is in operation.
5. Close the door.
Operation
AWT, AWT Fp operation
Control elements
1 Coin return
2 Coin slot
3 Tyre pressure button
4 Water dispenser button
1 Valve connector
2 Button +
3 Button -
4 Pressure gauge
5 Lever
6 Fuel pump nozzle
Drawing water
Checking tyre pressure
1. Insert a coin in the coin slot.
2. Press the water dispenser but-
ton.
3. Hold the fuel pump nozzle in
the container opening.
Pull the fuel pump nozzle lever
until the desired filling level has
been reached.
4. Hang the fuel pump nozzle
back on the device.
1. Insert a coin in the coin slot.
2. Press the tyre pressure button.
3. Secure the valve connector on
the tyre valve.
4. Read the tyre pressure at the
pressure gauge.
5. Increase the tyre pressure by
pressing the + button or reduce
it by pressing the - button.