Operating instructions
Table Of Contents
- Safety instructions
- m WARNING
- When using this product basic precautions should always be followed, including the following:
- Read all the instructions before using the product.
- Please observe the safety instructions of your pressure washer.
- The T-Racer must not be used by children.
- Only trigger the gun of the pressure washer if the T-Racer is located on the surface to be cleaned.
- Keep all persons/animals clear of the immediate vicinity of the cleaning head.
- Beware of the recoil force! Ensure a stable position and firmly hold the trigger gun with the extension handle.
- Turn off the pressure washer when examing or changing the T-Racer and after the completion of the cleaning operation.
- Maximum water temperature allowed is 104 °F (40°C). Please follow the instructions of your pressure washer.
- n Caution
- Do not use on windows.
- The T-Racer is not suited for scouring or scrubbing.
- Do not run over freestanding corners.
- Always test the T–Racer in an inconspicuous area.
- Never operate in the same area for more than 2 seconds, damage may occur.
- SAVE THESE INSTRUCTIONS!
- Preparing the Appliance
- Description of the Appliance
- When unpacking the product, make sure that no accessories are missing and that none of the package contents have been damaged. If you detect any transport damages please contact your retailer.
- Illustrations on Page 2
- Illustration
- 1 Housing
- 2 Bayonet connection
- 3 Adapter
- 4 Wand
- 5 High pressure nozzle
- 6 Twin-jet rotating arm
- Intended use
- For pressure washers with a pressure from 1400 psi to 1650 psi
- Use on horizontal surfaces like driveways, patios, side walks, etc.
- The T-Racer has not been designed for commercial use.
- Symbols on the appliance
- Danger!
- Keep hands away from moving parts.
- Application
- Note: Always use Kärcher water filter (order no. 4.730-059.0) during suction operations of the pressure washer.
- Preparatory operations
- Insert the adapter into the casing.
- Illustration
- 1 Take the adapter into the opening of the casing.
- 2 Turn the adapter clockwise until it snaps into place.
- Note
- Onetime installation. The adapter cannot be unlocked anymore.
- Cleaning surfaces
- Connect the T-Racer and the wand with the trigger gun.
- Illustration
- Connect wand with T-Racer.
- 1 Press the bayonet connection into the bayonet catch, then turn by 90° until it locks into place.
- 2 Tighten the union nut.
- Connect trigger gun with wand.
- 1 Press the bayonet connection into the bayonet catch, then turn by 90° until it locks into place.
- 2 Tighten the union nut.
- Tips for cleaning
- The T-Racer is not suited for scouring or scrubbing.
- Note: Outdoor surfaces should be swept before the T-Racer is used to avoid damaging the nozzles.
- Guide the T-Racer over the surface without effort.
- Illustration
- n Caution
- Do not run over freestanding corners.
- m Caution
- Do not reach under the edge of the T-Racer while the device is in operation.
- Troubleshooting
- Pressure washer does not build up the pressure or is vibrating.
- Dismantle the nozzles, check the nozzles for damage, rinse the T-Racer with clean water then reinstall the nozzles.
- Cleaning the high-pressure nozzle
- Illustration
- 1 Remove the clip.
- 2 Pull out the high-pressure nozzle.
- Rinse the high-pressure nozzle with clean water, replace if necessary.
- 3 Insert the nozzle.
- 4 Re-insert the clip.
- General notes
- Tip
- You can use the extension tube with any Kärcher accessory.
- Maintenance and care
- Care
- Use a moist cloth and clean the appliance after use.
- Store the appliance in a frost free area.
- The device can be suspended into the KÄRCHER organizer for storage.
- Maintenance
- The appliance is maintenance free.
- Customer Support USA and Canada
- In the U.S. or Canada, please call 1-800-537-4129 for warranty issues and visit www.karcher-help.com for technical support and product assistance.
- Customer Support Mexico
- Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx
- Español
- Français
Placer l'adaptateur dans le boîtier.
Illustration
1 Introduire l'adaptateur dans l'orifice
du boîtier.
2 Tourner l'adaptateur dans le sens
des aiguilles d'une montre jusqu'à ce
qu'il s'enclenche.
Remarque
Montage unique. L'adaptateur ne peut
plus être desserré.
Raccorder le T-Racer et la paroi à pistolet.
Illustration
Raccorder la paroi au T-Racer.
1 Enfoncer la rallonge dans le raccord
à baïonnette et puis la tourner de 90°
jusqu’à ce qu’elle s’enclenche.
2 Serrer la douille de sécurité.
Raccorder le pistolet à la paroi.
1 Enfoncer la rallonge dans le raccord
à baïonnette et puis la tourner de 90°
jusqu’à ce qu’elle s’enclenche.
2 Serrer la douille de sécurité.
Le T-Racer n’est pas approprié pour
récurer ou frotter !
Avant l’utilisation du T-Racer, les
surfaces libres doivent être balayées
afin d'éviter un endommagement des
buses.
Déplacer le T-Racer sans déploie-
ment de force sur la surface.
Illustration
몇 Attention
Ne pas passer sur des coins en saillie!
Attention
Ne jamais saisir sous le bord du T-
Racer durant le fonctionnement.
Le nettoyeur haute pression ne forme
pas de pression ou pulse.
Déposer les buses haute pression, vé-
rifier l’état des buses haute pression,
laver le T-Racer à l’eau propre puis re-
poser les buses haute pression.
Illustration
1 Retirer le clip.
2 Retirer la buse haute pression.
Nettoyer la buse haute pression à l'eau
claire, si nécessaire la remplacer.
3 Mettre la buse haute pression en place.
4 Monter le clip.
Vous pouvez utiliser le tube de rallonge
avec chaque accessoire Kärcher.
Nettoyer l'appareil avec un chiffon hu-
mide après utilisation.
Conserver l'appareil dans un lieu à l'abri
du gel.
Pour le stockage, l'appareil peut être ac-
croché dans le système d'organisation
KÄRCHER.
L'appareil ne nécessite aucune mainte-
nance.
Pour faire valoir une demande en garan-
tie, appelez le : 1-800-537-4129. Toutes
les autres informations sont disponibles
sous : www.karcher-help.com
Appeler : 01-800-024-13-13 pour obte-
nir de l'aide ou visitez notre site Web :
www.karcher.com.mx
Travaux préparatoires
Nettoyage des surfaces
Consignes au nettoyage
Consignes de dépannage
Nettoyer la buse à haute pression
Consignes générales
Conseil
Entretien et maintenance
Entretien
Maintenance
Service client É.-U.A et Canada
Assistance Mexique
8 FR